The effect of thermal annealing on dopant site choice in conjugated polymers
Source abstract
Abstract
Abstract Solution-processed organic electronic devices often consist of layers of polar and non-polar polymers. In addition, either of these layers could be doped with small molecular dopants. It is extremely important for device stability to understand the diffusion behavior of these molecular dopants under the thermal stress and whether the dopants have preference for the polar or the non-polar polymer layers. In this work, a widely used molecular dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) was chosen to investigate dopant site preference upon thermal annealing between the polar thiophene poly(thiophene-3-[2-(2-methoxy-ethoxy)ethoxy]-2,5-diyl) (S–P3MEET) and non-polar thiophene poly(3-hexylthiophene) (P3HT). F4TCNQ is able to p-type dope both P3HT and S–P3MEET. Further doping studies of S–P3MEET using near edge X-ray absorption fine structure spectroscopy, conductivity measurements and atomic force microscopy show that the F4TCNQ additive competes for doping sites with the covalently attached dopants on the S–P3MEET. Calorimetry measurements reveal that the F4TCNQ interacts strongly with the side-chains of the S–P3MEET, increasing the melting temperature of the side-chains by 30 °C with 5 wt% dopant loading. Next, the thermal stability of doping in the polar/non-polar (S–P3MEET/P3HT) bilayer architectures was investigated. Steady-state absorbance and fluorescence results show that F4TCNQ binds much more strongly in S–P3MEET than P3HT and very little F4TCNQ is found in the P3HT layer after annealing. In combination with reflectometry measurements, we show that F4TCNQ remains in the SP3MEET layer with annealing to 210 °C even though the sublimation temperature for neat F4TCNQ is about 80 °C. In contrast, F4TCNQ slowly diffuses out of P3HT at room temperature. We attribute this difference in binding the F4TCNQ anion to the ability of the ethyl-oxy side-chains of the S–P3MEET to orient around the charged dopant molecule and thereby to stabilize its position. This study suggests that polar side-chains could be engineered to increase the thermal stability of molecular dopant position.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
2. Manufacture, integration and demonstration of polymer solar cells in a lamp for the ”lighting africa” initiative10.1039/b918441d ↗
3. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
4. Migration of small molecules during the degradation of organic light-emitting diodes10.1016/j.orgel.2009.02.012 ↗
5. Interdiffusion of molecular acceptors through organic layers to metal substrates mimics doping-related energy level shifts10.1063/1.3213547 ↗
6. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
7. Stability of polymer solar cells10.1002/adma.201104187 ↗
8. Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
9. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
10. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
11. Effective approaches to improve the electrical conductivity of pedot:pss: a review10.1002/aelm.201500017 ↗
12. Intensity-dependent photocurrent generation at the anode in bulk-heterojunction solar cells10.1007/s00340-008-3081-8 ↗
13. The consequences of interface mixing on organic photovoltaic device characteristics10.1002/adfm.201002014 ↗
14. Directional dependence of electron blocking in pedot:pss10.1016/j.orgel.2012.08.004 ↗
15. Mixed interlayers at the interface between pedot:pss and conjugated polymers provide charge transport control10.1039/C4TC02251C ↗
16. High work-function hole transport layers by self-assembly using a fluorinated additive10.1039/C3TC30973H ↗
17. Miscibility and acid strength govern contact doping of organic photovoltaics with strong polyelectrolytes10.1021/acs.macromol.5b00724 ↗
18. Low voltage organic light emitting diodes featuring doped phthalocyanine as hole transport material10.1063/1.121982 ↗
19. Doped organic semiconductors: physics and application in light emitting diodes10.1016/j.orgel.2003.08.004 ↗
20. Highly efficient organic devices based on electrically doped transport layers10.1021/cr050156n ↗
21. Molecular migration behaviors in organic light-emitting diodes with different host structures10.1016/j.orgel.2010.12.005 ↗
22. Hermenau · 2012
23. Measurement of small molecular dopant f4tcnq and c60f36 diffusion in organic bilayer architectures10.1021/acsami.5b09216 ↗
24. The chemical and structural origin of efficient p-type doping in p3ht10.1016/j.orgel.2013.02.028 ↗
25. Comprehensive picture of p-type doping of p3ht with the molecular acceptor f4-tcnq10.1103/PhysRevB.87.115209 ↗
26. The effect of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane charge transfer dopants on the conformation and aggregation of poly(3-hexylthiophene)10.1039/c3tc31047g ↗
27. Reversible optical control of conjugated polymer solubility with sub-micrometer resolution10.1021/nn506820d ↗
28. Characterization of new transparent organic electrode materials10.1016/j.orgel.2011.08.008 ↗
29. Co-refinement of multiple-contrast neutron/x-ray reflectivity data using motofit10.1107/S0021889806005073 ↗
30. Localized charge transfer in a molecularly doped conducting polymer10.1002/adma.200700926 ↗
31. Introducing solubility control for improved organic p-type dopants10.1021/acs.chemmater.5b02340 ↗
32. Ultrathin polythiophene films on an intrinsically conducting polymer electrode: charge transfer induced valence states and interface dipoles10.1016/j.orgel.2011.03.005 ↗
33. Photoinduced carrier generation in p3ht/pcbm bulk heterojunction materials10.1021/jp075565x ↗
34. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
35. Determination of electron affinity of electron accepting molecules10.1007/s00339-008-5021-1 ↗
36. Electronic structure and current injection in zinc phthalocyanine doped with tetrafluorotetracyanoquinodimethane: interface versus bulk effects10.1016/S1566-1199(02)00033-2 ↗
37. Calibrated nexafs spectra of common conjugated polymers10.1063/1.3506636 ↗
38. Self-assembly of selective interfaces in organic photovoltaics10.1002/adfm.201201874 ↗
39. {NEXAFS} characterization of nanostructured carbon thin-films exposed to hydrogen10.1016/S0925-9635(00)00426-X ↗
40. Stöhr · 2013
41. Dv-xa calculation of electron energy-loss near edge-structures of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (f4tcnq)10.1016/j.elspec.2004.04.001 ↗
42. Characterization of oxidic and organic materials with synchrotron radiation based xps and xas
43. Thermal stability of amorphous hard carbon films produced by cathodic arc deposition10.1063/1.120339 ↗
44. Controlled p-type doping of polycrystalline and amorphous organic layers: self-consistent description of conductivity and field-effect mobility by a microscopic percolation model10.1103/PhysRevB.64.195208 ↗
45. Molecular doping of low-bandgap-polymer:fullerene solar cells: effects on transport and solar cells10.1016/j.orgel.2011.11.014 ↗
46. Gaskell · 2003
47. Crown ethers: sensors for ions and molecular scaffolds for materials and biological models10.1021/cr020080k ↗
48. Effects of hofmeister anions on the aggregation behavior of peo–ppo–peo triblock copolymers10.1021/la201463g ↗
49. Controlling microstructure in poly(3-hexylthiophene) nanofibers10.1039/C2JM13633C ↗
50. A general relationship between disorder, aggregation and charge transport in conjugated polymers10.1038/nmat3722 ↗
51. Near-ir femtosecond transient absorption spectroscopy of ultrafast polaron and triplet exciton formation in polythiophene films with different regioregularities10.1021/ja906621a ↗
52. Exciton-dopant and exciton-charge interactions in electronically doped oleds10.1016/j.jlumin.2004.08.038 ↗
53. Controlling electrical properties of conjugated polymers via a solution-based p-type doping10.1002/adma.200800735 ↗
54. Effect of crystallization on the electronic energy levels and thin film morphology of p3ht:pcbm blends10.1021/ma102841e ↗
55. Morphology of all-solution-processed ”bilayer” organic solar cells10.1002/adma.201003545 ↗
56. Phase-sensitive neutron reflectometry measurements applied in the study of photovoltaic films
57. Material profile influences in bulk-heterojunctions10.1002/polb.23564 ↗
58. The miscibility and depth profile of pcbm in p3ht: thermodynamic information to improve organic photovoltaics10.1039/c2cp40466d ↗
59. Nanoparticle concentration profile in polymer-based solar cells10.1039/B920979D ↗
60. Morphology of all-solution-processed “bilayer” organic solar cells10.1002/adma.201003545 ↗
61. National institute of standards and technology (nist) center for neutron research, scattering length density calculator [online].
62. X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb10.1021/ma00043a019 ↗
63. A novel p-dopant with low diffusion tendency and its application to organic light-emitting diodes10.1016/j.orgel.2009.12.019 ↗
64. Real-time investigation of crystallization and phase-segregation dynamics in p3ht:pcbm solar cells during thermal annealing10.1002/adfm.201002076 ↗