Origin of unusual thermoelectric transport behaviors in carbon nanotube filled polymer composites after solvent/acid treatments
Source abstract
Abstract
Abstract Composites made of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and carbon nanotube (CNT) have shown unchanged or even increased thermopower when electrical conductivity was raised by altering the concentration of CNT and/or treating the composites with a polar solvent, dimethyl sulfoxide (DMSO) or an acid, formic acid (FA). Unlike typical adversely correlated thermopower and electrical conductivity, remarkable increases in electrical conductivity by the treatment did not decrease thermopower. Furthermore, it is necessary to use an optimum CNT concentration to maximize thermopower and the power factor. In this study, an intermediate CNT concentration of 6.7 wt% showed the highest thermopower and power factor unlike other reports with typical organic composites. The origin of the unusual transport properties was suggested by studying changes in the relative ratio of conducting PEDOT core and insulating PSS, morphology, and carrier concentration and mobility. Our results indicate that the PSS removal by DMSO and FA could alter the carrier transport barrier, and CNT-PEDOT:PSS-CNT junctions could increase thermopower for composites with a low CNT concentration by avoiding direct contacts between CNTs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Flexible thermoelectric materials and device optimization for wearable energy harvesting10.1039/C5TC01644D ↗
2. Review on polymers for thermoelectric applications10.3390/ma7096701 ↗
3. Air-stable fabric thermoelectric modules made of N- and P-type carbon nanotubes10.1039/c2ee22838f ↗
4. Thermally driven large N-type voltage responses from hybrids of carbon nanotubes and poly(3,4-ethylenedioxythiophene) with tetrakis(dimethylamino)ethylene10.1002/adma.201502950 ↗
5. Enhanced thermoelectric properties of PEDOT: PSS nanofilms by a chemical dedoping process10.1039/C3TA14960A ↗
6. Enhanced thermoelectric performance of PEDOT with different counter-ions optimized by chemical reduction10.1039/C4TA01012D ↗
7. Tuning the thermoelectric properties of conducting polymers in an electrochemical transistor10.1021/ja305188r ↗
8. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
9. Improved thermoelectric behavior of nanotube-filled polymer composites with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate)10.1021/nn9013577 ↗
10. Highly conductive PEDOT: PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
11. Light-weight flexible carbon nanotube based organic composites with large thermoelectric power factors10.1021/nn202868a ↗
12. Fabrication of a layered nanostructure PEDOT: PSS/SWCNTs composite and its thermoelectric performance10.1039/c3ra42414f ↗
13. Improving the thermoelectric power factor of CNT/PEDOT: PSS nanocomposite films by ethylene glycol treatment10.1039/C6RA08599G ↗
14. Completely organic multilayer thin film with thermoelectric power factor rivaling inorganic tellurides10.1002/adma.201405738 ↗
15. Promising thermoelectric properties of commercial PEDOT: PSS materials and their Bi2Te3 powder composites10.1021/am100654p ↗
16. Highly doped carbon nanotubes with gold nanoparticles and their influence on electrical conductivity and thermopower of nanocomposites10.1371/journal.pone.0044977 ↗
17. Water-processable polymer−nanocrystal hybrids for thermoelectrics10.1021/nl102880k ↗
18. Enhanced thermoelectric properties of CNT/PANI composite nanofibers by highly orienting the arrangement of polymer chains10.1039/c2jm32750c ↗
19. Engineering electrical transport at the interface of conjugated carbon structures to improve thermoelectric properties of their composites10.1016/j.polymer.2016.05.062 ↗
20. Complex thermoelectric materials10.1038/nmat2090 ↗
21. Thermal transport driven by extraneous nanoparticles and phase segregation in nanostructured Mg2(Si,Sn) and estimation of optimum thermoelectric performance10.1021/acsami.5b12060 ↗
22. Recent progress on PEDOT-based thermoelectric materials10.3390/ma8020732 ↗
23. Thermoelectric power enhancement of PEDOT: PSS in high-humidity conditions10.7567/APEX.7.031601 ↗
24. Semi-metallic polymers10.1038/nmat3824 ↗
25. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
26. Fully organic nanocomposites with high thermoelectric power factors by using a dual-stabilizer preparation10.1002/ente.201300018 ↗
27. Transparent and flexible organic semiconductor nanofilms with enhanced thermoelectric efficiency10.1039/C4TA00700J ↗
28. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films10.1016/S0379-6779(02)01259-6 ↗
29. Microscopical investigations of PEDOT: PSS thin films10.1002/adfm.200801258 ↗
30. The origin of the high conductivity of poly(3,4-ethylenedioxythiophene)−poly(styrenesulfonate) (PEDOT−PSS) plastic electrodes10.1021/cm061032+ ↗
31. Comparison of dimethyl sulfoxide treated highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) electrodes for use in indium tin oxide-free organic electronic photovoltaic devices10.1016/j.orgel.2014.07.015 ↗
32. Highly conductive PEDOT: PSS treated with formic acid for ITO-free polymer solar cells10.1021/am405024d ↗
33. Morphological change and mobility enhancement in PEDOT: PSS by adding co-solvents10.1002/adma.201205158 ↗
34. Modified conformation and physical properties in conducting polymers due to varying conjugation and solvent interactions10.1039/C0JM02304C ↗
35. Simultaneously improving electrical conductivity and thermopower of polyaniline composites by utilizing carbon nanotubes as high mobility conduits10.1021/acsami.5b01149 ↗
36. High electrical conductivity and n-type thermopower from double-/single-wall carbon nanotubes by manipulating charge interactions between nanotubes and organic/inorganic nanomaterials10.1016/j.carbon.2011.06.082 ↗
37. Extraordinary mobility in semiconducting carbon nanotubes10.1021/nl034841q ↗
38. Flexible power fabrics made of carbon nanotubes for harvesting thermoelectricity10.1021/nn405893t ↗
39. Modeling of thermoelectric properties of SiGe alloy nanowires and estimation of the best design parameters for high figure-of-merits10.1063/1.4906226 ↗
40. Thermoelectric behavior of organic thin film nanocomposites10.1002/polb.23186 ↗
41. Photoinduced p- to n-type switching in thermoelectric polymer-carbon nanotube composites10.1002/adma.201505521 ↗
42. Thermopower enhancement in conducting polymer nanocomposites via carrier energy scattering at the organic-inorganic semiconductor interface10.1039/c2ee21803h ↗
43. A promising approach to enhanced thermoelectric properties using carbon nanotube networks10.1002/adma.200902221 ↗
44. Modulating electronic transport properties of carbon nanotubes to improve the thermoelectric power factor via nanoparticle decoration10.1021/nn102999h ↗
45. Thermoelectric properties of lead chalcogenide core–shell nanostructures10.1021/nn2017183 ↗
46. Theory of enhancement of thermoelectric properties of materials with nanoinclusions10.1103/PhysRevB.77.214304 ↗
47. Enhancing thermoelectric properties of organic composites through hierarchical nanostructures10.1038/srep03448 ↗
48. Silver-based intermetallic heterostructures in Sb2Te3 thick films with enhanced thermoelectric power factors10.1021/nl204346g ↗
49. Perspectives on thermoelectrics: from fundamentals to device applications10.1039/C1EE02497C ↗
50. Embedded Ag-rich nanodots in PbTe: enhancement of thermoelectric properties through energy filtering of the carriers10.1063/1.3488621 ↗
51. Thermal conductance and thermopower of an individual single-wall carbon nanotube10.1021/nl051044e ↗
52. Dramatic electrical conductivity improvement of carbon nanotube networks by simultaneous de-bundling and hole-doping with chlorosulfonic acid10.1039/c2jm16000e ↗