journal article·2015-06

Optical properties and conductivity of PEDOT:PSS films treated by polyethylenimine solution for organic solar cells

Zaifang Li, Fei Qin, Tiefeng Liu, Ru Ge, Wei Meng, Jinhui Tong, Sixing Xiong, Yinhua Zhou

Publisher page

Abstract

Abstract We report on conductivity and optical property of three different types of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) films [pristine PH1000 film ( PH1000-p ), with 5 wt.% ethylene glycol additive ( PH1000-EG ) and with sulfuric acid post-treatment ( PH1000-SA )] before and after polyethylenimine (PEI) treatment. The PEI is found to decrease the conductivity of all the PEDOT:PSS films. The processing solvent of 2-methoxyethanol is found to significantly enhance the conductivity of PH1000-p from 1.1 up to 744 S/cm while the processing solvent of isopropanol or water does not change the conductivity of PH1000-p much. As for the optical properties, the PEI treatment slightly changes the transmittance and reflectance of PH1000-p and PH1000-EG films, while the PEI leads to an substantial increase of the absorptance in the spectral region of 400–1100 nm of the PH1000-SA films. Though the optical property and conductivity of the three different types of PEDOT:PSS films vary with the PEI treatment, the treated PEDOT:PSS films exhibit similar low work function. We demonstrate solar cells with a simple device structure of glass/low-WF PEDOT:PSS/P3HT:ICBA/high-WF PEDOT:PSS cells that exhibit good performance with open-circuit voltage of 0.82 V and fill factor up to 0.62 under 100 mW/cm 2 white light illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
2. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Highly conductive PEDOT:PSS treated with formic acid for ITO-free polymer solar cells10.1021/am405024d ↗
5. Transparent electrodes: highly conductive PEDOT:PSS nanofibrils induced by solution-processed crystallization
6. PEDOT:PSS top electrode prepared by transfer lamination using plastic wrap as the transfer medium for organic solar cells10.1016/j.orgel.2014.07.028 ↗
7. “Secondary doping” methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices10.1016/j.displa.2013.08.007 ↗
8. High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes10.1039/c3ee41077c ↗
9. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
10. Efficient indium-tin-oxide (ITO) free top-absorbing organic photodetector with highly transparent polymer top electrode10.1016/j.orgel.2011.06.021 ↗
11. Optimization of a polymer top electrode for inverted semitransparent organic solar cells10.1016/j.orgel.2011.02.017 ↗
12. Influence of a water rinse on the structure and properties of poly(3,4-ethylene dioxythiophene): poly(styrene sulfonate) films10.1021/la051403l ↗
13. On the mechanism of conductivity enhancement in poly (3,4-ethylenedioxythiophene): poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
14. Investigation on polymer anode design for flexible polymer solar cells10.1063/1.2945796 ↗
15. J. You, L. Dou, K. Yoshimura, T. Kato, K. Ohya, T. Moriarty, K. Emery, C.-C. Chen, J. Gao, G. Li, Y. Yang, A polymer tandem solar cell with 10.6% power conversion efficiency, Nat. Commun. 4 (2013) 1446.10.1038/ncomms2411 ↗
16. J. Gilot, M.M. Wienk, R.A.J. Janssen, Double and triple junction polymer solar cells processed from solution, Appl. Phys. Lett. 90 (2007).10.1063/1.2719668 ↗
17. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
18. All-plastic solar cells with a high photovoltaic dynamic range10.1039/c3ta15073a ↗
19. Thieno[3,2-b]thiophene-substituted benzo[1,2-b:4,5-b′]dithiophene as a promising building block for low bandgap semiconducting polymers for high-performance single and tandem organic photovoltaic cells10.1021/cm4035903 ↗
20. J. Lee, H. Kang, J. Kong, K. Lee, A depletion-free, ionic, self-assembled recombination layer for tandem polymer solar cells, Adv. Energy Mater. 4 (2014).10.1002/aenm.201470021 ↗
21. Fluorinated benzoselenadiazole-based low-band-gap polymers for high efficiency inverted single and tandem organic photovoltaic cells10.1021/ma4026493 ↗
22. High performance polymeric charge recombination layer for organic tandem solar cells10.1039/c2ee23294d ↗
23. Polyethylenimine aqueous solution: a low-cost and environmentally friendly formulation to produce low-work-function electrodes for efficient easy-to-fabricate organic solar cells10.1021/am5077974 ↗
24. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
25. Enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene) thin films treated with H2SO410.1016/j.orgel.2014.09.012 ↗
26. Effect of PEDOT nanofibril networks on the conductivity, flexibility, and coatability of PEDOT:PSS films10.1021/am500769k ↗
27. An all-polymer-air PEDOT battery10.1016/j.orgel.2011.12.018 ↗
28. Conductivity of de-doped poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(02)00086-3 ↗
29. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
30. Poly(ethylene imine) impurities induce n-doping reaction in organic (semi)conductors10.1002/adma.201401986 ↗
31. Chemical post-treatment and thermoelectric properties of poly(3,4-ethylenedioxylthiophene):poly(styrenesulfonate) thin films10.1063/1.4864749 ↗
32. Blending of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) with poly(ethyleneimine) as an active layer in depletion-mode organic thin film transistors10.1063/1.2824381 ↗