Thickness dependent barrier performance of permeation barriers made from atomic layer deposited alumina for organic devices
Source abstract
Abstract
Organic devices like organic light emitting diodes (OLEDs) or organic solar cells degrade fast when exposed to ambient air. Hence, thin-films acting as permeation barriers are needed for their protection. Atomic layer deposition (ALD) is known to be one of the best technologies to reach barriers with a low defect density at gentle process conditions. As well, ALD is reported to be one of the thinnest barrier layers, with a critical thickness – defining a continuous barrier film – as low as 5–10 nm for ALD processed Al2O3. In this work, we investigate the barrier performance of Al2O3 films processed by ALD at 80 °C with trimethylaluminum and ozone as precursors. The coverage of defects in such films is investigated on a 5 nm thick Al2O3 film, i.e. below the critical thickness, on calcium using atomic force microscopy (AFM). We find for this sub-critical thickness regime that all spots giving raise to water ingress on the 20 × 20 μm2 scan range are positioned on nearly flat surface sites without the presence of particles or large substrate features. Hence below the critical thickness, ALD leaves open or at least weakly covered spots even on feature-free surface sites. The thickness dependent performance of these barrier films is investigated for thicknesses ranging from 15 to 100 nm, i.e. above the assumed critical film thickness of this system. To measure the barrier performance, electrical calcium corrosion tests are used in order to measure the water vapor transmission rate (WVTR), electrodeposition is used in order to decorate and count defects, and dark spot growth on OLEDs is used in order to confirm the results for real devices. For 15–25 nm barrier thickness, we observe an exponential decrease in defect density with barrier thickness which explains the likewise observed exponential decrease in WVTR and OLED degradation rate. Above 25 nm, a further increase in barrier thickness leads to a further exponential decrease in defect density, but an only sub-exponential decrease in WVTR and OLED degradation rate. In conclusion, the performance of the thin Al2O3 permeation barrier is dominated by its defect density. This defect density is reduced exponentially with increasing barrier thickness for alumina thicknesses of up to at least 25 nm.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Active optoelectronics using thin-film organic semiconductors10.1109/2944.902156 ↗
2. White organic light-emitting diodes with fluorescent tube efficiency10.1038/nature08003 ↗
3. Small-molecule solar cells-status and perspectives10.1088/0957-4484/19/42/424001 ↗
4. Efficiency and stability of p–i–n type organic light emitting diodes for display and lighting applications10.1109/JPROC.2009.2022418 ↗
5. Stability of polymer solar cells10.1002/adma.201104187 ↗
6. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
7. Thin film encapsulation for flexible AM-OLED: a review10.1088/0268-1242/26/3/034001 ↗
8. Barrier technology and applications
9. Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests10.1016/j.solmat.2013.10.023 ↗
10. Defect-permeation correlation for ultrathin transparent barrier coatings on polymers10.1116/1.582156 ↗
11. Electroplating to visualize defects in Al2O3 thin films grown using atomic layer deposition10.1016/j.tsf.2008.12.052 ↗
12. Al2O3 and TiO2 atomic layer deposition on copper for water corrosion resistance10.1021/am2009579 ↗
13. Gas diffusion barriers on polymers using multilayers fabricated by Al2O3 and rapid SiO2 atomic layer deposition10.1021/jp076866+ ↗
14. Plasma-assisted atomic layer deposition of Al2O3 moisture permeation barriers on polymers10.1063/1.2338776 ↗
15. Gas diffusion barriers on polymers using Al2O3 atomic layer deposition10.1063/1.2168489 ↗
16. Permeation measurements and modeling of highly defective Al2O3 thin films grown by atomic layer deposition on polymers10.1063/1.3519476 ↗
17. Permeability and corrosion in ZrO2/Al2O3 nanolaminate and Al2O3 thin films grown by atomic layer deposition on polymers10.1116/1.4729447 ↗
18. Barrier performance optimization of atomic layer deposited diffusion barriers for organic light emitting diodes using X-ray reflectivity investigations10.1063/1.4839455 ↗
19. Permeation rate measurements by electrical analysis of calcium corrosion10.1063/1.1626015 ↗
20. Electrical calcium test for moisture barrier evaluation for organic devices10.1063/1.3633956 ↗
21. The influence of laterally inhomogeneous corrosion on electrical and optical calcium moisture barrier characterization10.1063/1.4791798 ↗
22. Ultrastable and efficient red organic light emitting diodes with doped transport layers10.1063/1.2268354 ↗
23. The effect of barrier performance on the lifetime of small-molecule organic solar cells10.1016/j.solmat.2011.09.026 ↗
24. High-sensitivity permeation measurements on flexible OLED substrates10.1117/12.510027 ↗
25. Note: influence of calcium corrosion on the performance of an adjacent permeation barrier10.1063/1.4861536 ↗
26. Surface reactions in Al2O3 growth from trimethylaluminum and water by atomic layer epitaxy10.1016/S0169-4332(96)00513-2 ↗