journal article·2014-11

Enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene) thin films treated with H 2 SO 4

Jiao Wang, Kefeng Cai, Shirley Shen

Organic Electronics· Volume 15· Issue 11
Publisher page

Abstract

Abstract Poly(3,4-ethylenedioxythiophene)–tosylate–polyethylene glycol–polypropylene glycol–polyethylene glycol (PEDOT–Tos–PPP) films were prepared via a vapor phase polymerization (VPP) method. The thermoelectric (TE) properties of the films before and after treated with H2SO4 at different concentrations were measured at 295 K. The TE properties of the films have been significantly improved by the H2SO4 treatment. For example, after treated with H2SO4 at 1 M, the electrical conductivity of the film has increased remarkably from 944 to 1750 S cm−1, the Seebeck coefficient of the film reduced slightly from 16.5 to 14.6 μV K−1, and the thermal conductivity decreased from 0.495 to 0.474 W/mK. Hence, the ZT value at 295 K has increased from 0.016 to 0.024. The electrical conductivity (Seebeck coefficient) of the untreated and 1 M H2SO4 treated PEDOT-Tos-PPP films decreases (increases) with increasing temperature from 295 to 375 K. And the power factor of the films monotonically increases with temperature. The power factor at 375 K of the 1 M H2SO4 treated film is almost twice as high as that at 295 K. Atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS) analyses, and the thickness measurement of the films indicate that the tri-block copolymer PPP have been removed from the PEDOT-Tos-PPP films after the H2SO4 treatment, and the UV–Vis-NIR absorption spectroscopy and Raman spectroscopy analyses reveal an increasing in the doping level in the PEDOT chains after the H2SO4 treatment. Therefore, the TE properties enhancement may be attributed to the combined effects of the removal of the insulating PPP from the PEDOT-Tos-PPP film, increase the doping level and conformational change of the PEDOT chains resulted from the H2SO4 treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
2. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
3. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
4. Synthesis and thermoelectric properties of polycarbazole, polyindolocarbazole, and polydiindolocarbazole derivatives10.1021/cm070063h ↗
5. Structure and electronic transport properties of polyaniline/NaFe4P12 composite10.1016/S0009-2614(01)01389-6 ↗
6. Highly soluble poly(2,7-carbazolenevinylene) for thermoelectrical applications: from theory to experiment10.1016/j.reactfunctpolym.2004.11.008 ↗
7. Facile synthesis of water-dispersible conducting polymer nanospheres10.1021/nn101378p ↗
8. Improved thermoelectric performance of PEDOT:PSS films prepared by polar-solvent vapor annealing method
9. Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: a mini-review10.1016/j.synthmet.2012.04.005 ↗
10. Thermoelectric performance of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)10.1088/0256-307X/25/6/076 ↗
11. One-pot fabrication and enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene)-Bi2S3 nanocomposites10.1007/s11051-012-0848-y ↗
12. Facile preparation and thermoelectric properties of BiTe based alloy nanosheet/PEDOT:PSS composite films10.1021/am5002772 ↗
13. Research progress on polymer–inorganic thermoelectric nanocomposite materials10.1016/j.progpolymsci.2011.11.003 ↗
14. Multilayered carbon nanotube/polymer composite based thermoelectric fabrics10.1021/nl203806q ↗
15. Facile fabrication and thermoelectric properties of PbTe-modified poly(3,4-ethylenedioxythiophene) nanotubes10.1021/am101287w ↗
16. Facile fabrication of PEDOT:PSS/polythiophenes bilayered nanofilms on pure organic electrodes and their thermoelectric performance10.1021/am404183v ↗
17. What to expect from conducting polymers on the playground of thermoelectricity: lessons learned from four high-mobility polymeric semiconductors10.1021/ma4020406 ↗
18. Thermopower enhancement in conducting polymer nanocomposites via carrier energy scattering at the organic–inorganic semiconductor interface10.1039/c2ee21803h ↗
19. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
20. Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1038/nmat3012 ↗
21. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
22. Tuning the thermoelectric properties of conducting polymers in an electrochemical transistor10.1021/ja305188r ↗
23. Improvement of the Seebeck coefficient of PEDOT:PSS by chemical reduction combined with a novel method for its transfer using free-standing thin films10.1039/C3TC31674B ↗
24. Flexible PEDOT electrodes with large thermoelectric power factors to generate electricity by the touch of fingertips10.1039/c3ee23729j ↗
25. Enhancement of the thermoelectric properties of PEDOT:PSS thin films by post-treatment10.1039/c3ta11209h ↗
26. Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate): a photoelectron spectroscopy study10.1002/polb.10659 ↗
27. Poly(3,4-ethylenedioxythiophene) nanoparticles prepared in aqueous DBSA solutions10.1016/S0379-6779(03)00419-3 ↗
28. Electrochemical oxidation of poly(3,4-ethylenedioxythiophene) – “in situ” conductivity and spectroscopic investigations10.1016/S0379-6779(99)00271-4 ↗
29. Base inhibited oxidative polymerization of 3,4-ethylenedioxythiophene with iron(III)tosylate10.1016/j.synthmet.2005.07.085 ↗
30. Polymeric material with metal-like conductivity for next generation organic electronic devices10.1021/cm302899v ↗
31. Semi-metallic polymers10.1038/nmat3824 ↗
32. Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids10.1021/am900708x ↗
33. Highly conductive PEDOT:PSS treated with formic acid for ITO-free polymer solar cells10.1021/am405024d ↗
34. Highly conductive PEDOT:PSS films prepared through a treatment with geminal diols or amphiphilic fluoro compounds10.1016/j.orgel.2012.05.039 ↗
35. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
36. Widely variable Seebeck coefficient and enhanced thermoelectric power of PEDOT:PSS films by blending thermal decomposable ammonium formate10.1016/j.orgel.2011.09.004 ↗
37. Mott · 1979
38. Thermal transport in organic semiconducting polymers10.1063/1.4812234 ↗
39. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
40. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
41. Systematic control of the electrical conductivity of poly(3,4-ethylenedioxythiophene) via oxidative chemical vapor deposition10.1021/ma0628477 ↗
42. Spectroelectrochemical studies of poly(3,4-ethylenedioxythiophene) in aqueous medium10.1016/S0379-6779(01)00397-6 ↗
43. Charge storage in doped poly(thiophene): Optical and electrochemical studies10.1103/PhysRevB.30.702 ↗
44. Influence of PEG-ran-PPG surfactant on vapour phase polymerised PEDOT thin films10.1002/marc.200900371 ↗
45. The role of water in the synthesis and performance of vapour phase polymerised PEDOT electrochromic devices10.1039/b912324e ↗
46. Electronic, chemical and structural change induced by organic solvents in tosylate-doped poly(3,4-ethylenedioxythiophene) (PEDOT-OTs)10.1016/j.synthmet.2004.12.011 ↗
47. A facile process to produce highly conductive poly(3,4-ethylenedioxythiophene) films for ITO-free flexible OLED devices10.1039/C3TC32096K ↗
48. In situ spectroelectrochemical Raman studies of poly(3,4-ethylenedioxythiophene)10.1021/ma9905674 ↗
49. Studies of dopant effects in poly(3,4-ethylenedi-oxythiophene) using Raman spectroscopy10.1002/jrs.1545 ↗
50. Enhancement of the electrical conductivity in PEDOT:PSS films by the addition of dimethyl sulfate10.1021/jp107386x ↗
51. Improved performance of polymer solar cells featuring one-dimensional PEDOT nanorods in a modified buffer layer10.1149/1.3534201 ↗
52. PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
53. Electronic transport in doped poly (3,4-ethylenedioxythiophene) near the metal-insulator transition10.1016/S0379-6779(97)81227-1 ↗