journal article·2015-11Open access

Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications

Z. Tehrani, T. Korochkina, S. Govindarajan, D.J. Thomas, J. O’Mahony, J. Kettle, T.C. Claypole, D.T. Gethin

Abstract

This research has demonstrated how an ultra-thin rechargeable battery technology has been fabricated using screen printing technology. The screen printing process enabled the sequential deposition of current collector, electrode and separator/electrolyte materials onto a polyethylene terephthalate (PET) substrate in order to form both flexible and rechargeable electrodes for a battery application. The anode and cathode fabricated were based on the conducting poly (3,4-ethylenedioxythiophen): poly (styrene sulfonate) (PEDOT: PSS) and polyethyleneimine (PEI) which were combined to form the electrodes. The difference in the oxidation level between the two electrodes produced an open circuit voltage of 0.60 V and displayed a practical specific capacity of 5.5 mAh g−1. The battery developed had an active surface area of 400 mm2 and a device thickness of 440 μm. The chemistry developed during this study displayed long-term cycling potential and proves the stability of the cells for continued usage. This technology has direct uses in future personal wearable electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Organic thermogenerators for energy autarkic systems on flexible substrates10.1088/0022-3727/41/13/135113 ↗
2. M. Delmanowski, The applications and limitations of printable batteries. .
3. A review of the present situation and future developments of micro-batteries for wireless autonomous sensor systems10.1002/er.2949 ↗
4. Thin-film lithium and lithium-ion batteries10.1016/S0167-2738(00)00327-1 ↗
5. Development of printed thin and flexible batteries
6. P. Harrop, Ultrathin lithium rechargeable battery, printed electronic. .
7. H. Karmarkar, Thin film batteries. , (accessed Aug 07, 2013).
8. F. Alliance, Imprint energy receives award from FlexTech Alliance. .
9. Joseph S. Kucherovsky, G.R.S., James A. Miller, Christopher F. Mlnarik. Printing solvent inks including water swellable polymer in pattern on polymeric film to form electrodes; depositing electrolyte and separator; sealing film to confine. US 09/630,214, 2002.
10. A super ink jet printed zinc-silver 3D microbattery10.1088/0960-1317/19/9/094013 ↗
11. Characterization and optimization of a printed, primary silver–zinc battery10.1016/j.jpowsour.2011.09.076 ↗
12. Paper-based, printed zinc-air battery10.1016/j.jpowsour.2009.06.054 ↗
13. Sol–gel fabrication of lithium-ion microarray battery10.1016/j.elecom.2006.11.025 ↗
14. Development of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery10.1016/j.jpowsour.2014.06.032 ↗
15. Linden · 2011
16. An epidermal alkaline rechargeable Ag–Zn printable tattoo battery for wearable electronics10.1039/C4TA03256J ↗
17. Microscopic nickel–zinc batteries for use in autonomous microsystems10.1149/1.1417975 ↗
18. Rapid prototyping of micropower sources by laser direct-write10.1007/s00339-004-2586-1 ↗
19. A new kind of all-solid-state thin-film-type lithium-ion battery developed by applying a DC high voltage10.1016/j.elecom.2006.03.003 ↗
20. Thin-film rechargeable Li batteries10.1016/0167-2738(94)90423-5 ↗
21. Characteristics of Li/MoO3-x thin film batteries10.1016/S0167-2738(01)00889-X ↗
22. Characterization of thin-film rechargeable lithium batteries with lithium cobalt oxide cathodes10.1149/1.1837188 ↗
23. An all-polymer-air PEDOT battery10.1016/j.orgel.2011.12.018 ↗
24. Highly conductive PEDOT: PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
25. Novel zinc ion conducting polymer gel electrolytes based on ionic liquids10.1016/j.elecom.2005.09.011 ↗
26. C. Honsberg, S. Bowden, Battery capacity – PVCDROM. .
27. E.D. Man, Characteristics of the lead-acid battery. .