Large area roll-to-roll sputtering of transparent ITO/Ag/ITO cathodes for flexible inverted organic solar cell modules
Source abstract
Abstract
Abstract We fabricated solution-processed flexible inverted organic solar cell (IOSC) modules (10 cm × 10 cm) on roll-to-roll (RTR) sputtered ITO/Ag/ITO multilayer cathodes. By using a pilot-scale RTR sputtering system equipped with mid-range frequency power for dual ITO targets and direct current power for the Ag target, we were able to continuously deposit a high-quality ITO/Ag/ITO multilayer on PET substrate with a width of 700 mm and length of 20,000 mm as a function of Ag thickness. At the Ag thickness of 12 nm, the ITO/Ag/ITO multilayer had a very low sheet resistance of 3.03 Ohm/square and high transmittance of 88.17%, which are better values than those of amorphous ITO film. A strip-type ITO/Ag/ITO cathode was successfully patterned using a RTR wet etching process. Successful operation of flexible IOSC modules on RTR sputtered ITO/Ag/ITO cathodes indicate that the RTR sputtering technique is a promising coating process for fabrication of high-quality transparent and flexible cathodes and can advance the commercialization of cost-efficient flexible IOSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Krebs · 2012
2. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules10.1039/C4EE01223B ↗
3. Upscaling from single cell to modules fabrication of vacuum and ITO-free polymer solar cells on flexible substrates with long lifetime10.1039/C3TC31859A ↗
4. Fullerene alloy formation and the benefits for efficient printing of ternary blend organic solar cells10.1039/C5TC00781J ↗
5. Development of lab-to-fab production equipment across several length scales for printed energy technology including solar cells10.1002/ente.201402140 ↗
6. A low band gap co-polymer of dithienigermole and 2,1,3-benzothiadiazole by Suzuki polycondensation and its application in transistor and photovoltaic cells10.1039/c1jm13628c ↗
7. Synthesis of 5h-dithieno[3,2-b:2′,3′-d]pyran as an electron-rich building block for donor-acceptor type low-bandgap polymers
8. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
9. 10.2% Power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
10. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
11. Optically monitored spray coating system for the controlled deposition of the photoactive layer in organic solar cells10.1063/1.4906454 ↗
12. 25th anniversary article: rise to power – opv-based solar parks10.1002/adma.201302031 ↗
13. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
14. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
15. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
16. Ambient stable large-area flexible organic solar cells using silver gird hybrid with vapor phase polymerized poly(3,4-Ethylenedioxythiophene) cathode10.1016/j.solmat.2015.07.022 ↗
17. Bishop · 2011
18. Indium-tin oxide thin films deposited at room temperature on glass and PET substrates: Optical and electrical properties variation with the H2-Ar sputtering gas mixture10.1016/j.apsusc.2015.03.096 ↗
19. Structure, optical, and electrical properties of indium tin oxide thin films prepared by sputtering at room temperature and annealed in air or nitrogen10.1063/1.2715539 ↗
20. Stress-corrosion cracking of indium tin oxide coated polyethylene terephthalate for flexible optoelectronic devices10.1016/j.tsf.2008.10.031 ↗
21. Flexible organic solar cells using an oxide/metal/oxide trilayer as transparent electrode10.1016/j.orgel.2012.05.047 ↗
22. Roll-to-roll sputtered Si-doped In2O3/Ag/Si-doped In2O3 multilayer as flexible and transparent anodes for flexible organic solar cells10.1116/1.4901875 ↗
23. Nano-sized indium-free MTO/Ag/MTO transparent conducting electrode prepared by RF sputtering at room temperature for organic photovoltaic cells10.1016/j.solmat.2014.08.025 ↗
24. Mechanical integrity of flexible InZnO/Ag/InZnO multilayer electrodes grown by continuous roll-to-roll sputtering10.1016/j.solmat.2011.08.001 ↗
25. Mechanical Flexible of ZnSnO/Ag/ZnSnO films grown by roll-to-roll sputtering for flexible organic photovoltaics10.7567/JJAP.51.115801 ↗
26. Highly flexible and transparent InZnSnOx/Ag/InZnSnOx multilayer electrode for flexible organic light emitting diodes10.1063/1.2937845 ↗
27. Transparent and flexible amorphous InZnAlO films grown by roll-to-roll sputtering for acidic butter-free flexible organic solar cells10.1016/j.orgel.2015.05.045 ↗
28. Direct laser patterning of transparent ITO-Ag-ITO multilayer anodes for organic solar cells10.1016/j.apsusc.2014.12.017 ↗
29. Dependence of the electrical and optical behavior of ITO-silver-ITO multilayers on the silver properties10.1016/S0040-6090(99)00949-9 ↗
30. ITO/Ag/TIO multilayer films for the application of a very law resistance transparent electrode10.1016/S0040-6090(98)01556-9 ↗
31. Low resistance and highly transparent ITO-Ag-ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
32. ZnS/Ag/ZnS nano-multilayer films for transparent electrodes in flat display application10.1016/S0169-4332(01)00570-0 ↗
33. Optimized multilayer indium-free electrode for organic photovoltaics10.1002/pssa.201431469 ↗
34. Ag-Pd-Cu alloy inserted transparent indium tin oxide electrodes for organic solar cells10.1116/1.4891560 ↗
35. Antireflective ZnSnO/Ag bilayer-based transparent source and drain electrodes for transparent thin film transistors10.1063/1.4732091 ↗
36. Comparative study of ITO layers deposited by DC and RF magnetron sputtering at room temperature10.1016/j.jnoncrysol.2005.11.088 ↗
37. High quality ITO thin films grown by DC and RF sputtering without oxygen10.1088/0022-3727/43/5/055402 ↗
38. High power generators for medium frequency sputtering applications10.1016/S0022-3093(97)00131-2 ↗