journal article·2010-05

Efficiency improvement of fluorescent OLEDs by tuning the working function of PEDOT:PSS using UV–ozone exposure

Amare Benor, Shin-ya Takizawa, César Pérez-Bolívar, Pavel Anzenbacher

Organic Electronics· Volume 11· Issue 5
Publisher page

Abstract

Abstract The efficiency improvement of fluorescent organic light-emitting diodes (OLEDs) is achieved by tuning the work function of a hole-injection layer (HIL) of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). This tuning is achieved by treating PEDOT:PSS with ultraviolet light (UV)–ozone plasma exposure. In order to demonstrate the effect of the UV–ozone treatment, two simple green-emitting device OLED architectures were used; Device I utilized tris(8-quinolinolato) aluminum (Alq 3 ) as an emitter while Device II employed Alq 3 doped with 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10-(2-benzothiazolyl)quinolizino[9,9a,1gh]-coumarin (C545T) emissive layer. The study showed that the OLEDs efficiency depends on the type of device configuration and the duration of the UV–ozone exposure. Here, a short time exposure of UV–ozone treatment of 4 min and 8 min was found optimal for the best device characteristics. The maximum power efficiency in Device I increased from 1.05 lm/W (untreated) to 2.70 lm/W, while Device II, doped with emitter increased from 4.10 lm/W to 8.24 lm/W. Consequently, Device I and Device II obtained the 100% increase in the power efficiency. The improvements in device efficiency is attributed to the efficient injection and balance in charge carriers resulting from the tuned work function of the PEDOT:PSS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Skotheim · 2007
2. Wallace · 2002
3. Kafafi · 2005
4. Reviews-organic electronics10.1557/JMR.2004.0280 ↗
5. Forrest · Nature · 2004 · 428 · 91110.1038/nature02498 ↗
6. Anzenbacher · Appl. Phys. Lett. · 2008 · 93 · 16330210.1063/1.3005424 ↗
7. Baldo · Phys. Rev. B · 1999 · 60 · 1442210.1103/PhysRevB.60.14422 ↗
8. Helefrich · J. Chem. Phys. · 1966 · 44 · 290210.1063/1.1727152 ↗
9. Ho · Nature · 2000 · 404 · 48110.1038/35006610 ↗
10. Cao · Nature · 1999 · 397 · 41410.1038/17087 ↗
11. Wilson · Nature · 2001 · 413 · 82810.1038/35101565 ↗
12. Chen · Appl. Phys. Lett. · 2002 · 81 · 57410.1063/1.1495542 ↗
13. Duan · Appl. Phys. Lett. · 2008 · 92 · 11330410.1063/1.2898401 ↗
14. Okumoto · Appl. Phys. Lett. · 2006 · 89 · 06350410.1063/1.2266452 ↗
15. Lee · J. Electrochem. Soc. · 2007 · 154 · 22610.1149/1.2737659 ↗
16. Chen · Thin Solid Films · 2008 · 516 · 336410.1016/j.tsf.2007.08.120 ↗
17. Petrosino · Proc. SPIE · 2007 · 6593 · 65931010.1117/12.722022 ↗
18. Denier van der Gon · Org. Electron. · 2002 · 3 · 11110.1016/S1566-1199(02)00048-4 ↗
19. Fan · Macromolecules · 2008 · 41 · 597110.1021/ma8012459 ↗
20. Tengstedt · Thin Solid Films · 2006 · 515 · 208510.1016/j.tsf.2006.07.005 ↗
21. Lin · Appl. Phys. Lett. · 2007 · 91 · 09212710.1063/1.2777147 ↗
22. Benor · Appl. Phys. Lett. · 2009 · 94 · 19330110.1063/1.3132059 ↗
23. Zhou · Chem. Phys. Lett. · 2006 · 427 · 39410.1016/j.cplett.2006.06.035 ↗