journal article·2013-01

Effects of annealing temperature of aqueous solution-processed ZnO electron-selective layers on inverted polymer solar cells

Yoonseok Ka, Eungkyu Lee, Si Yun Park, Jaewon Seo, Dae-Gyeon Kwon, Hyun Hwi Lee, Yongsup Park, Youn Sang Kim, Changsoon Kim

Organic Electronics· Volume 14· Issue 1
Publisher page

Abstract

Abstract We investigate the effects of ZnO annealing temperature (TA) on the performance of inverted polymer solar cells with ZnO electron-selective layers deposited by spin coating aqueous solutions of an ammine-hydroxo zinc complex. The inverted solar cells based on poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester with TA as low as 80 °C exhibit power-conversion efficiencies of 3.6%, which is equal to those of devices with higher TA. Characterizations of the ZnO films using X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, grazing incidence wide-angle X-ray scattering, and optical transmittance measurements show that the abrupt improvement of device performance from TA = 60 to 80 °C is due to the improvement of energy-level alignment arising from the increases in the relative amount and the crystallinity of ZnO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
3. Polymer tandem photovoltaic cells with molecularly intimate interfaces achieved by a thin-film transfer technique10.1016/j.solmat.2012.05.025 ↗
4. High photovoltaic performance of inkjet printed polymer: Fullerene blends10.1002/adma.200700911 ↗
5. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
6. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
7. Time-resolved morphological study of organic thin film solar cells based on calcium/aluminium cathode material10.1016/j.cplett.2008.06.070 ↗
8. Self-assembled monolayer modified ZnO/metal bilayer cathodes for polymer/fullerene bulk-heterojunction solar cells10.1063/1.2919524 ↗
9. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
10. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
11. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
12. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO[sub3] hole selective layer10.1063/1.3039076 ↗
13. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
14. Self-assembly of ZnO: from nanodots to nanorods10.1002/1521-3773(20020402)41:7<1188::AID-ANIE1188>3.0.CO;2-5 ↗
15. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
16. A simple nanostructured polymer/ZnO hybrid solar cell – preparation and operation in air10.1088/0957-4484/19/42/424013 ↗
17. Aqueous inorganic inks for low-temperature fabrication of ZnO TFTs10.1021/ja808243k ↗
18. Inverted organic solar cells based on aqueous processed ZnO interlayers at low temperature10.1063/1.4719201 ↗
19. Y. Ka, E. Lee, S.Y. Park, Y.S. Kim, C. Kim, Low-temperature fabrication of ZnO-based inverted organic solar cells, SPIE Photonics Europe, 2012, Brussels, Belgium.
20. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
21. Energy level alignment at a charge generation interface between 4,4’-bis(N-phenyl-1-naphthylamino)biphenyl and 1,4,5,8,9,11-hexaazatriphenylene–hexacarbonitrile10.1063/1.3081409 ↗
22. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I–V curves of organic solar cells10.1002/adfm.201002669 ↗
23. X-ray photoelectron spectroscopy and auger electron spectroscopy studies of Al-doped ZnO films10.1016/S0169-4332(99)00601-7 ↗
24. Blue luminescent centers and microstructural evaluation by XPS and Raman in ZnO thin films annealed in vacuum, N2 and O210.1016/j.physb.2006.05.346 ↗
25. Effects of annealing on chemical composition, crystallinity, optical transmission and electrical conductivity of ZnO thin films prepared on glass substrates by chemical bath deposition10.1143/JJAP.44.1372 ↗
26. Effect of bath temperature on the properties of nanocrystalline ZnO thin films10.1166/jnn.2010.2306 ↗
27. T. Nii, I. Sugiyama, T. Kase, M. Sato, Y. Kaniyama, S. Kuriyagawa, K. Kushiya, H. Takeshita, Effects of Cd-free buffer layer for CuInSe2 thin-film solar cells, in: IEEE First World Conference on Photovoltaic Energy Conversion, 1994, pp. 254–257.10.1109/WCPEC.1994.519856 ↗
28. Growth of well-defined ZnO microparticles by hydroxide ion hydrolysis of zinc salts10.1039/b211723c ↗
29. Understanding the quantum size effects in ZnO nanocrystals10.1039/b310404d ↗
30. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
31. Optical constants and band edge of amorphous zinc oxide thin films10.1016/j.tsf.2007.03.055 ↗
32. Optical spectra and direct optical transitions in amorphous and crystalline ZnO thin films and powders10.1149/1.3267882 ↗
33. Cu-based multilayer transparent electrodes a low-cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗