journal article·2022-04

Highly efficient inverted quantum dot light-emitting diodes employing sol-gel derived Li-doped ZnO as electron transport layer

Jipeng Jing, Lihua Lin, Kaiyu Yang, Hailong Hu, Tailiang Guo, Fushan Li

Organic Electronics· Volume 103
Publisher page

Abstract

Zinc oxide (ZnO) is widely used as an electron transport layer (ETL) in quantum dot light-emitting diodes (QLED) because of its advantages of appropriate energy level and the simple process at low temperature. However, its high conductivity and abundant surface defects have become essential factors limiting the development of QLED. Here, we employ sol-gel derived lithium (Li)-doped ZnO (LZO) film as an ETL for inverted red QLED to achieve low-cost and high-efficiency QLED. We show that the conduction band minimum, the density of oxygen defects and conductivity of ZnO can be tuned by Li-doping. Consequently, the red QLED with 3 wt% Li-doped ZnO ETL exhibit maximum external quantum efficiency (EQE) and current efficiency of 16.4% and 24.1 cd/A, respectively, which are about 1.3-fold greater than those of the device with ZnO ETL. The Li-doping in sol-gel derived ZnO provides a feasible strategy for low-cost and high-performance inverted QLEDs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Toward full-color electroluminescent quantum dot displays10.1021/acs.nanolett.0c03939 ↗
2. A review on the electroluminescence properties of quantum-dot light-emitting diodes10.1016/j.orgel.2021.106086 ↗
3. Flexible quantum dot light-emitting diodes for next-generation displays
4. Highly efficient inverted polymer light-emitting diodes using surface modifications of ZnO layer10.1038/ncomms5840 ↗
5. Light-emitting-diodes made from cadmium selenide nanocrystals and a semiconducting polymer10.1038/370354a0 ↗
6. Achieving highly efficient and stable quantum dot light-emitting diodes with interface modification10.1109/LED.2020.3011505 ↗
7. Electrochemically-stable ligands bridge the photoluminescence-electroluminescence gap of quantum dots10.1038/s41467-020-14756-5 ↗
8. High-performance, solution-processed, and insulating-layer-free light-emitting diodes based on colloidal quantum dots10.1002/adma.201801387 ↗
9. Efficiency enhancement of tris(dimethylamino)-phosphine-based red indium phosphide quantum-dot light-emitting diodes via chlorine-doped ZnMgO electron transport layers10.1021/acs.jpcc.0c07209 ↗
10. High-efficiency quantum-dot light-emitting devices with enhanced charge injection10.1038/nphoton.2013.70 ↗
11. All-solution-processed high-performance quantum dot light emitting devices employing an inorganic thiocyanate as hole injection layer10.1016/j.orgel.2019.04.037 ↗
12. Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures10.1038/nphoton.2011.171 ↗
13. Comprehensive study of sol-gel versus hydrolysis-condensation methods to prepare ZnO films: electron transport layers in perovskite solar cells10.1021/acsami.7b04833 ↗
14. ZnO nanoparticles for quantum-dot-based light-emitting diodes10.1021/acsanm.0c00639 ↗
15. Induced crystallization of sol–gel-derived zinc oxide for efficient non-fullerene polymer solar cells10.1039/D1TA00232E ↗
16. Polymer‐modified ZnO nanoparticles as electron transport layer for polymer‐based solar cells10.1002/adfm.202002932 ↗
17. Perovskite solar cells with ZnO electron-transporting materials10.1002/adma.201703737 ↗
18. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
19. An underestimated photoactive area in organic solar cells based on a ZnO interlayer10.1039/D1TC00745A ↗
20. Reducing the persistent photoconductivity effect in zinc oxide by sequential surface ultraviolet ozone and annealing treatments10.1021/acsaelm.9b00623 ↗
21. Organic electrolytes doped ZnO layer as the electron transport layer for bulk heterojunction polymer solar cells10.1002/solr.201800086 ↗
22. Rearranging low-dimensional phase distribution of quasi-2D perovskites for efficient sky-blue perovskite light-emitting diodes10.1021/acsnano.0c03765 ↗
23. Solution-processed, high-performance light-emitting diodes based on quantum dots10.1038/nature13829 ↗
24. Efficient quantum dot light-emitting diodes with a Zn0.85Mg0.15O interfacial modification layer10.1039/C7NR02099F ↗
25. Or Li-doped zinc oxide nanoparticles as electron transport layers for quantum dot light-emitting diodes10.1038/s41598-020-64263-2 ↗
26. Enhancing the performance of quantum dot light-emitting diodes using room-temperature-processed Ga-doped ZnO nanoparticles as the electron transport layer10.1021/acsami.7b03262 ↗
27. Effects of ZnMgO electron transport layer on the performance of InP-based inverted quantum dot light-emitting diodes10.3390/nano11051246 ↗
28. Highly stable red quantum dot light-emitting diodes with long T95 operation lifetimes10.1021/acs.jpclett.0c00836 ↗
29. Remarkable lifetime improvement of quantum-dot light emitting diodes by incorporating rubidium carbonate in metal-oxide electron transport layers10.1039/C9TC02683E ↗
30. High-performance quantum dot light-emitting diodes based on Al-doped ZnO nanoparticles electron transport layer10.1021/acsami.8b04754 ↗
31. Unusual sequential annealing effect in achieving high thermal stability of conductive Al-doped ZnO nanofilms10.1021/acsaelm.0c00321 ↗
32. Modulation-doped ZnO as high performance electron-selective layer for efficient silicon heterojunction solar cells10.1016/j.nanoen.2018.10.010 ↗
33. An XPS study of La2O3 and In2O3 influence on the physicochemical properties of MoO3/TiO2 catalysts10.1016/S0926-860X(01)00658-5 ↗
34. Li and Mg Co-doped zinc oxide electron transporting layer for highly efficient quantum dot light-emitting diodes10.1021/acsami.8b04721 ↗
35. Existence of ligands within sol-gel-derived ZnO films and their effect on perovskite solar cells10.1021/acsami.9b13278 ↗
36. Solution-Processed lithium-doped ZnO electron transport layer for efficient triple cation (Rb, MA, FA) perovskite solar cells10.1021/acsami.7b09153 ↗
37. Flexible Li-doped ZnO piezotronic transistor array for in-plane strain mapping10.1016/j.nanoen.2018.11.013 ↗
38. Enhanced efficiency of quantum dot light-emitting diode by sol-gel derived Zn1-xMgxO electron transport layer
39. High-efficiency quantum dot light-emitting diodes based on Li-doped TiO2 nanoparticles as an alternative electron transport layer10.1039/D0NR05920J ↗
40. Effect and mechanism of encapsulation on aging characteristics of quantum-dot light-emitting diodes10.1007/s12274-020-3091-3 ↗
41. Charge generation layers for solution processed tandem organic light emitting diodes with regular device architecture10.1021/acsami.5b00883 ↗
42. Organic alternating current electroluminescence device based on 4,4′-bis(N-phenyl-1-naphthylamino) biphenyl/1,4,5,8,9,11-hexaazatriphenylene charge generation unit10.1016/j.orgel.2014.11.018 ↗