Concurrently pumped ultrasonic spray coating for donor:acceptor and thickness optimization of organic solar cells
Source abstract
Abstract
Abstract We assess the utility of concurrent spray coating to efficiently screen and optimize solutions for organic solar cells. With this technique two independent solutions are coaxially pumped to the ultrasonic nozzle tip of the spray coater, where a micron-scale mist of droplets, each consisting of one of the two respective solutions with negligible mixing, is ejected toward the substrate. Concurrent spray coating is shown to allow the scanning of two important photoactive layer parameters: thickness, by concurrently diluting concentrated donor:acceptor (D:A) solution with pure solvent, and D:A ratio by concurrently spraying independent solutions of donor and acceptor. The assessment is done using the archetypal poly(3-hexylthiophene) (P3HT):(6,6)-phenyl C61-butyric acid methyl ester (PCBM) system. By allowing the droplets to coalesce on the substrate prior to drying, the resulting film realizes a favorable morphology, confirmed via high-performance OSC devices, with a peak efficiency of 4.1%, 72% fill factor, 9.3 mA/cm 2 short circuit current density, and a 620 mV open circuit voltage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. P. Ting, Polyera achieves world-record organic solar cell performance, Polyera Corporation Press Release, 2012.
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
4. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
5. All-spray-coated semitransparent inverted organic solar cells: From electron selective to anode layers10.1016/j.orgel.2012.08.012 ↗
6. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
7. Self-limited plasmonic welding of silver nanowire junctions10.1038/nmat3238 ↗
8. Spray coated high-conductivity PEDOT:PSS transparent electrodes for stretchable and mechanically-robust organic solar cells10.1016/j.solmat.2012.09.005 ↗
9. Inverted semi-transparent organic solar cells with spray coated, surfactant free polymer top-electrodes10.1016/j.solmat.2011.10.016 ↗
10. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
11. Nanoparticle-based, spray-coated silver top contacts for efficient polymer solar cells10.1016/j.orgel.2009.03.006 ↗
12. Spraycoating of silver nanoparticle electrodes for inverted polymer solar cells10.1016/j.orgel.2009.02.019 ↗
13. Marangoni effect reverses coffee-ring depositions10.1021/jp0609232 ↗
14. Improving the nanoscale morphology and processibility for PCDTBT-based polymer solar cells via solvent mixtures10.1016/j.orgel.2012.08.003 ↗
15. Lateral phase separation gradients in spin-coated thin films of high-performance polymer:fullerene photovoltaic blends10.1002/adfm.201100566 ↗
16. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
17. Multi-source/component spray coating for polymer solar cells10.1021/nn901758p ↗
18. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
19. Surface treatment patterning of organic photovoltaic films for low-cost modules10.1016/j.orgel.2012.11.018 ↗
20. Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells10.1016/j.solmat.2008.11.052 ↗
21. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
22. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
23. Composition and annealing effects in polythiophene/fullerene solar cells10.1007/s10853-005-0568-0 ↗
24. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
25. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗
26. Influence of fullerene ordering on the energy of the charge-transfer state and open-circuit voltage in polymer:fullerene solar cells10.1021/jp110982m ↗
27. Influence of polymer-blend morphology on charge transport and photocurrent generation in donor–acceptor polymer blends10.1021/nl0608386 ↗
28. Solar cells utilizing small molecular weight organic semiconductors10.1002/pip.788 ↗
29. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
30. Compositional dependence of the performance of poly(p-phenylene vinylene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200400345 ↗
31. Morphologies of self-organizing regioregular conjugated polymer/fullerene aggregates in thin film solar cells10.1021/ma901895d ↗
32. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
33. Preparation of active layers in polymer solar cells by aerosol jet printing10.1021/am200907k ↗
34. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
35. High efficiency organic solar cells with spray coated active layers comprised of a low band gap conjugated polymer10.1063/1.3687911 ↗