journal article·2017-05

High-performance thin-film encapsulation for organic light-emitting diodes

Peter van de Weijer, Piet C.P. Bouten, Sandeep Unnikrishnan, Hylke B. Akkerman, Jasper J. Michels, Ton M.B. van Mol

Publisher page

Abstract

Organic light-emitting diodes degrade rapidly by means of local cathode oxidation when exposed to the ambient atmosphere, resulting in visible non-emissive areas called black spots. High performance inorganic based encapsulations are required to protect the OLED. We have applied a hybrid thin-film encapsulation stack consisting of two inorganic barrier layers of silicon nitride deposited at low temperature with an organic layer in between. The resulting water permeation mechanism into the OLED is solely by means of lateral pinhole-to-pinhole transport. With the application of CaO nanoparticles in the organic layer the lateral water transport rate is reduced and we show that black spot formation in 8 cm2 OLEDs is delayed by 6000 h at accelerated climate conditions of 60°C/90% relative humidity. This is estimated to correspond to 20 years at ambient conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Formation and growth of black spots in organic light emitting diodes10.1063/1.363598 ↗
2. Degradation of organic light-emitting devices due to formation and growth of dark spots10.1016/S0921-5107(01)00599-2 ↗
3. Nuclei of dark spots in organic EL devices: detection by DFM and observation of the microstructure by TEM10.1016/S0379-6779(97)03989-1 ↗
4. Water vapor and oxygen degradation mechanisms in organic light emitting diodes10.1002/1616-3028(200104)11:2<116::AID-ADFM116>3.0.CO;2-B ↗
5. Organic electroluminescent diodes10.1063/1.98799 ↗
6. Reliability and degradation of organic light emitting devices10.1063/1.112532 ↗
7. Thin film encapsulation for flexible AM-OLED: a review10.1088/0268-1242/26/3/034001 ↗
8. Evaluating high performance diffusion barriers: the calcium test
9. Experimental comparison of high-performance water vapor permeation measurement methods10.1016/j.orgel.2014.10.014 ↗
10. Thin film barrier and film encapsulation technology for flexible OLED lamps
11. Thin film encapsulation of OLED displays with a NONON stack10.1889/1.1825767 ↗
12. High-performance transparent barrier films of SiOx/SiNx stacks on flexible polymer substrates10.1149/1.2335592 ↗
13. Thin film passivation characteristics in OLED using in-situ passivation10.4313/TEEM.2012.13.2.93 ↗
14. Ultrathin film encapsulation of an OLED by ALD10.1149/1.1850396 ↗
15. Cathode encapsulation of organic light emitting diodes by atomic layer deposited Al2O3 films and Al2O3/a-SiNx:H stacks10.1116/1.3664762 ↗
16. Recent progress on thin-film encapsulation technologies for organic electronic devices10.1016/j.optcom.2015.08.021 ↗
17. Thin film encapsulated flexible organic electroluminescent displays10.1063/1.1594284 ↗
18. Stress management in thin-film gas-permeation barriers10.1021/acsami.5b11499 ↗
19. A flexible moisture barrier comprised of a SiO2-embedded organic–inorganic hybrid nanocomposite and Al2O3 for thin-film encapsulation of OLEDs10.1016/j.orgel.2013.03.008 ↗
20. Thin film encapsulation for organic light emitting diodes using a multi-barrier composed of MgO prepared by atomic layer deposition and hybrid materials10.1016/j.orgel.2013.04.011 ↗
21. Thin film encapsulation for organic light-emitting diodes using inorganic/organic hybrid layers by atomic layer deposition10.1186/s11671-015-0857-8 ↗
22. http://www.lighting.philips.com/main/products/oled.html.
23. http://www.oledworks.com.