journal article·2011-11

Effect of mixed solvents on PCDTBT:PC70BM based solar cells

Salima Alem, Ta-Ya Chu, Shing C. Tse, Salem Wakim, Jianping Lu, Raluca Movileanu, Ye Tao, Francis Bélanger, Denis Désilets, Serge Beaupré, Mario Leclerc, Sheila Rodman, David Waller, Russell Gaudiana

Organic Electronics· Volume 12· Issue 11
Publisher page

Abstract

Abstract We investigated the effect of solvents on the morphology, charge transport and device performance of poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl C71-butyric acid methyl ester (PC70BM) based solar cells. To carry out this investigation, chloroform and 1,2-dichlorobenzene were chosen as good solvents of the two compounds. Films prepared with chloroform exhibit larger domains than those prepared with 1,2-dichlorobenzene and their size increases with the amount of PC70BM. Fine tuning of the domain size was realized by using a solvent of mixed chloroform and 1,2-dichlorobenzene. At a mixing ratio of 50%:50%, a power conversion efficiency of 6.1% was achieved on PCDTBT:PC70BM (1:3) devices with an active area of 1 cm2, under air mass 1.5 global (AM 1.5 G) irradiation at 100 mW/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions10.1063/1.359792 ↗
3. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
5. Highly efficient polycarbazole-based organic photovoltaic devices10.1063/1.3182797 ↗
6. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
7. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
8. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
9. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
10. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
11. 2.5% Efficient organic plastic solar cells10.1063/1.1345834 ↗
12. Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): fullerene10.1063/1.1929875 ↗
13. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
14. Properties of MEH-PPV films prepared by slow solvent evaporation10.1016/j.synthmet.2004.06.044 ↗
15. Efficient polymer-based interpenetrated network photovoltaic cells10.1063/1.1669065 ↗
16. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
17. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
18. High efficiency polymer solar cells with vertically modulated nanoscale morphology10.1088/0957-4484/20/16/165202 ↗
19. Highly efficient organic solar cells based on a poly(2,7-carbazole) derivative10.1039/b901302d ↗
20. Design rules for donors in bulk-heterojunction solar cells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
21. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
22. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojuction solar cells10.1002/adfm.200305026 ↗
23. Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends10.1021/ja8012598 ↗
24. Sze · 1981
25. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗