A facile chemical reduction approach for effectively tuning thermoelectric properties of PEDOT films
Source abstract
Abstract
Abstract Poly(3,4-ethylenedioxythiophene)–tosylate–polyethylene glycol–polypropylene glycol–polyethylene glycol (PEDOT–Tos–PPP) films were prepared via a vapor phase polymerization (VPP) method. The films possess good electrical conductivity (1550 S cm −1 ), low Seebeck coefficient (14.9 μV K −1 ) and thermal conductivity (0.501 W m −1 K −1 ), and ZT ∼ 0.02 at room temperature (RT, 295 K). Then, the films were treated with NaBH 4 /DMSO solutions of different NaBH 4 concentrations to adjust the redox level. After the NaBH 4 /DMSO treatment (dedoping), the electrical conductivity of the films continuously decreased from 1550 to 5.7 S cm −1 , whereas the Seebeck coefficient steeply increased from 14.9 to 143.5 μV K −1 . A maximum power factor of 98.1 μW m −1 K −2 has been achieved at an optimum redox level. In addition, the thermal conductivity of the PEDOT–Tos–PPP films decrease from 0.501 to 0.451 W m −1 K −1 after treated with 0.04% NaBH 4 /DMSO solution. A maximum ZT value of 0.064 has been achieved at RT. The electrical conductivity and thermal conductivity (Seebeck coefficient) of the untreated and 0.04% NaBH 4 /DMSO treated PEDOT–Tos–PPP films decrease (increases) with increasing temperature from 295 to 385 K. And the power factor of the films monotonically increases with temperature. The ZT at 385 K of the 0.04% NaBH 4 /DMSO treated film is 0.155.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
2. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
3. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
4. A review of thermoelectric devices for cooling applications10.1080/15435075.2013.829778 ↗
5. One-step interfacial synthesis and thermoelectric properties of Ag/Cu–poly(3,4-ethylenedioxythiophene) nanostructured composites10.1007/s11051-014-2531-y ↗
6. Research progress on polymer–inorganic thermoelectric nanocomposite materials10.1016/j.progpolymsci.2011.11.003 ↗
7. Electrical and thermoelectric properties of poly(2,7-Carbazole) derivatives10.1021/cm8031175 ↗
8. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
9. Facile preparation and thermoelectric properties of Bi(2)Te(3) based alloy nanosheet/PEDOT:PSS composite films10.1021/am5002772 ↗
10. The synergic regulation of conductivity and Seebeck coefficient in pure polyaniline by chemically changing the ordered degree of molecular chains10.1039/C3TA14008C ↗
11. Paper: An effective substrate for the enhancement of thermoelectric properties in PEDOT:PSS10.1002/polb.23482 ↗
12. Thermoelectric performance of poly(3-hexylthiophene) films doped by iodine vapor with promising high seebeck coefficient10.1007/s13391-013-3150-y ↗
13. In situ fabrication and thermoelectric properties of PbTe–polyaniline composite nanostructures10.1007/s11051-010-0043-y ↗
14. Large thermoelectric power factor in polyaniline/graphene nanocomposite films prepared by solution-assistant dispersing method10.1039/c4ta01541j ↗
15. Enhanced thermoelectric properties of CNT/PANI composite nanofibers by highly orienting the arrangement of polymer chains10.1039/c2jm32750c ↗
16. Facile fabrication and thermoelectric properties of PbTe-modified poly(3,4-ethylenedioxythiophene) nanotubes10.1021/am101287w ↗
17. Preparation and thermoelectric properties of multi-walled carbon nanotubes/polypyrrole composites10.1016/j.synthmet.2014.06.003 ↗
18. Abnormally enhanced thermoelectric transport properties of SWNT/PANI hybrid films by the strengthened PANI molecular ordering10.1039/C4EE01905A ↗
19. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
20. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
21. Secondary doping methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices10.1016/j.displa.2013.08.007 ↗
22. Synthesis and thermoelectric properties of polycarbazole, polyindolocarbazole, and polydiindolocarbazole derivatives10.1021/cm070063h ↗
23. Highly soluble poly(2,7-carbazolenevinylene) for thermoelectrical applications: From theory to experiment10.1016/j.reactfunctpolym.2004.11.008 ↗
24. Structure and electronic transport properties of polyaniline/NaFe4P12 composite10.1016/S0009-2614(01)01389-6 ↗
25. Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1038/nmat3012 ↗
26. Enhancement of the thermoelectric properties of PEDOT:PSS thin films by post-treatment10.1039/c3ta11209h ↗
27. Flexible PEDOT electrodes with large thermoelectric power factors to generate electricity by the touch of fingertips10.1039/c3ee23729j ↗
28. Enhanced thermoelectric performance of PEDOT with different counter-ions optimized by chemical reduction10.1039/c4ta01012d ↗
29. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
30. Enhanced thermoelectric properties of PEDOT:PSS nanofilms by a chemical dedoping process10.1039/C3TA14960A ↗
31. Transparent and flexible organic semiconductor nanofilms with enhanced thermoelectric efficiency10.1039/c4ta00700j ↗
32. Enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene) thin films treated with H2SO410.1016/j.orgel.2014.09.012 ↗
33. Polymeric material with metal-like conductivity for next generation organic electronic devices10.1021/cm302899v ↗
34. Semi-metallic polymers10.1038/nmat3824 ↗
35. Mott · 1979
36. Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate): A photoelectron spectroscopy study10.1002/polb.10659 ↗
37. Electronic, chemical and structural change induced by organic solvents in tosylate-doped poly(3,4-ethylenedioxythiophene) PEDOT-OTs10.1016/j.synthmet.2004.12.011 ↗
38. X-ray photoelectron spectroscopy study of counterion incorporation in poly(3,4-ethylenedioxythiophene)10.1021/jp811282f ↗
39. Surface characterization of poly(3,4-ethylenedioxythiophene)-coated latexes by X-ray photoelectron spectroscopy10.1021/la991390+ ↗
40. Influence of PEG-ran-PPG surfactant on vapour phase polymerised PEDOT thin films10.1002/marc.200900371 ↗
41. The role of water in the synthesis and performance of vapour phase polymerised PEDOT electrochromic devices10.1039/b912324e ↗
42. XPS studies of the oxygen 1s and 2s levels in a wide range of functional polymers10.1021/ac00059a006 ↗
43. Effect of solvent on PEDOT/PSS nanometer-scaled thin films: XPS and STEM/AFM studies10.1016/j.synthmet.2009.07.032 ↗
44. Spectroscopic study on sputtered PEDOT–PSS: role of surface PSS layer10.1016/j.orgel.2006.04.005 ↗
45. Characterization of the PEDOT–PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
46. In situ spectroelectrochemical raman studies of poly(3,4-ethylenedioxythiophene) PEDT10.1021/ma9905674 ↗
47. Surface-enhanced raman study of the interaction of PEDOT:PSS with plasmonically active nanoparticles10.1021/jp100135x ↗
48. Raman study of triblock polyether/LiCF3SO3 polymeric electrolytes10.1002/jrs.707 ↗
49. Charge storage in doped poly(thiophene): optical and electrochemical studies10.1103/PhysRevB.30.702 ↗
50. Spectroelectrochemical studies of poly(3,4-ethylenedioxythiophene) in aqueous medium10.1016/S0379-6779(01)00397-6 ↗
51. Systematic control of the electrical conductivity of poly(3,4-ethylenedioxythiophene) via oxidative chemical vapor deposition10.1021/ma0628477 ↗
52. In situ EPR spectroelectrochemical studies of paramagnetic centres in poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-butylenedioxythiophene) (PBuDOT) films10.1016/S0301-0104(03)00253-2 ↗