All inkjet-printed piezoelectric polymer actuators: Characterization and applications for micropumps in lab-on-a-chip systems
Source abstract
Abstract
Abstract Digital printing technologies are promising as future manufacturing approaches due to their capabilities of highly flexible and additive material deposition on various substrates. In this contribution, all inkjet-printed piezoelectric polymer actuators are presented based on polyvinylidene fluoride trifluoroethylene (P(VDF-TrFE)) and electrodes printed from silver nanoparticle dispersions. The target application for the actuators described here are membrane pumps for microfluidic lab-on-a-chip (LOC) systems. For the first time, all-inkjet-printed P(VDF-TrFE) actuators are reported and the corresponding piezoelectric d31 coefficient is measured. For manufacturing the actuators, a low-cost procedure is employed that consists of only three inkjet printing and post-processing steps where moderate thermal treatments (Tmax = 130 °C) are combined with plasma sintering. The processing is therefore compatible with a wide range of temperature sensitive polymer substrates, completely additive and highly flexible. A sandwich-like structure of a piezoelectric P(VDF-TrFE) layer between two silver electrodes is inkjet-printed onto a polyethylene terephthalate (PET) substrate. When a voltage is applied across the piezoelectric layer, the reverse piezoelectric effect will lead to a bending deflection of this unimorph structure. The piezoelectric d31 coefficients are found to be approximately 7 to 9 pm V−1, which allows the generation of significant actuator deflections. For the application in a micropump, flow rates of several 100 μL min−1 are anticipated, which is promising for LOC applications. Most current micropumps are based on actuator elements that are fabricated separately and mounted on a passive membrane. By using all inkjet-printed actuators, as presented here, the joining step is avoided and the benefits of low-cost printed devices are added to the well-developed processing approaches for microfluidic chips.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Microfluidic and Capillary Electrophoresis Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. An all-printed ferroelectric active matrix sensor network based on only five functional materials forming a touchless control interface
2. RFID tag and RF structures on a paper substrate using inkjet-printing technology10.1109/TMTT.2007.909886 ↗
3. Organic light-emitting devices (OLEDs) and OLED-based chemical and biological sensors: an overview10.1088/0022-3727/41/13/133001 ↗
4. A new approach to the solvent system for inkjet-printed P3HT:PCBM solar cells and its use in devices with printed passive and active layers10.1016/j.solmat.2010.05.054 ↗
5. Inkjet printing-process and its applications10.1002/adma.200901141 ↗
6. Low-voltage organic thin-film transistors with high-k nanocomposite gate dielectrics for flexible electronics and optothermal sensors10.1002/adma.200700831 ↗
7. Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications10.1557/jmr.2012.419 ↗
8. Air stable high resolution organic transistors by selective laser sintering of ink-jet printed metal nanoparticles10.1063/1.2719162 ↗
9. Localized atmospheric plasma sintering of inkjet printed silver nanoparticles10.1039/c2jm35586h ↗
10. Electrical sintering of nanoparticle structures10.1088/0957-4484/19/17/175201 ↗
11. Roll-to-roll compatible sintering of inkjet printed features by photonic and microwave exposure: from non-conductive ink to 40 bulk silver conductivity in less than 15s10.1002/adma.201104417 ↗
12. Microfluidic chips for point-of-care immunodiagnostics
13. Polymer microfabrication technologies for microfluidic systems10.1007/s00216-007-1692-2 ↗
14. A review of micropumps10.1088/0960-1317/14/6/R01 ↗
15. Current micropump technologies and their biomedical applications10.1007/s00542-009-0804-7 ↗
16. Y. Bar-Cohen, Electroactive polymer (EAP) actuators as artificial muscles: Reality, Potential, and Challenges, second ed., SPIE Press Monograph, 2004. DOI 10.1117/3.547465.10.1117/3.547465 ↗
17. Development, characterization, and theoretical evaluation of electroactive polymer-based micropump diaphragm10.1016/j.sna.2005.01.020 ↗
18. Relaxor ferroelectric polymers, thin film devices, and ink-jet microprinting for thin film device fabrication10.1080/00150190600946146 ↗
19. Argon plasma sintering of inkjet printed silver tracks on polymer substrates10.1039/b823329b ↗
20. Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas10.1557/jmr.2013.73 ↗
21. Optimization of poly(vinylidene fluoride-trifluoroethylene) films as non-volatile memory for flexible electronics10.1016/j.orgel.2010.02.012 ↗
22. Thermal stresses in elastic multilayer systems10.1016/S0040-6090(02)00699-5 ↗
23. Piezoelectric, dielectric, and elastic properties of poly(vinylidene fluoride/trifluoroethylene)10.1063/1.354566 ↗
24. Goodfellow GmbH homepage, Material properties table, (accessed 22.07.13).
25. Performance evaluation of a valveless micropump driven by a ring-type piezoelectric actuator10.1109/TUFFC.2006.1593386 ↗
26. A. Olsson, Valve-less diffuser micropumps, Ph.D. thesis, Royal Institute of Technology Stockholm, 1998.
27. Micropumps – past, progress and future prospects10.1016/S0925-4005(04)00108-X ↗
28. Piezoelectrically actuated dome-shaped diaphragm micropump10.1109/JMEMS.2004.839331 ↗
29. Micropumps, microvalves, and micromixers within pcr microfluidic chips: advances and trends10.1016/j.biotechadv.2007.05.003 ↗
30. Real time quantitative PCR10.1101/gr.6.10.986 ↗
31. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
32. Nano-imprinted ferroelectric polymer nanodot arrays for high density data storage10.1002/adfm.201203042 ↗
33. Dynamic characteristics measurements of inkjet-printed thin films of nanosilver suspensions on a flexible plastic substrate10.1088/0960-1317/19/9/095021 ↗
34. Crystallization and microstructure-dependent elastic moduli of ferroelectric P(VDF-TrFE) thin films10.1039/c0sm00350f ↗