Thermoelectric effects in solid-state polyelectrolytes
Source abstract
Abstract
Abstract Solid-state polyelectrolytes have recently been reported to exhibit extremely high thermally induced voltage in contrast to conventional thermoelectric materials, showing great promise in energy harvesting for wearable and flexible electronics. Nevertheless the thermoelectric behaviors of polyelectrolytes have been barely studied. Here we provide comparative experimental studies about the thermoelectric behaviors of three different types of solid-state polyelectrolytes - cation conductors with negatively charged immobile backbones (Nafion and S-PEEK), conductors with both cations and anions (basic PVA-NaOH and acidic PVA-H3PO4), and an anion conductor (PDDAC). We observed that the proton conductors (Nafion and S-PEEK) exhibited large thermopower values up to ∼5.5 mV/K. Higher humidity rendered the thermopower of S-PEEK larger but that of Nafion smaller, which is attributed to the opposite thermo-diffusion direction of water. When both cation and anion are thermally diffused (PVA-NaOH and PVA-H3PO4), the absolute values of thermopower was relatively small 1–1.5 mV/K and independent of humidity. In PDDAC, we observed extremely large thermopower values up to 19 mV/K, which could be attributed to more rigorous dissociation of Cl− in the hotter side rather than the thermo-diffusion of Cl−. Our experimental results provide useful data for developing practical thermal energy harvesters and storage devices with high output voltages for wearable and flexible electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advanced Thermoelectric Materials and Devices · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Flexible thermoelectric materials and device optimization for wearable energy harvesting10.1039/C5TC01644D ↗
2. Large-scale integration of flexible materials into rolled and corrugated thermoelectric modules10.1002/app.44208 ↗
3. Hybrid thermoelectric piezoelectric generator10.1063/1.4954770 ↗
4. Thermally chargeable solid-state supercapacitor
5. Flexible power fabrics made of carbon nanotubes for harvesting thermoelectricity10.1021/nn405893t ↗
6. Wearable thermocells based on gel electrolytes for the utilization of body heat10.1002/anie.201606314 ↗
7. Bulk nanostructured thermoelectric materials: current research and future prospects10.1039/b822664b ↗
8. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
9. Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1038/nmat3012 ↗
10. Organic thermoelectric materials for energy harvesting and temperature control10.1038/natrevmats.2016.50 ↗
11. Air-stable fabric thermoelectric modules made of N- and P-type carbon nanotubes10.1039/c2ee22838f ↗
12. Thermally driven large N-Type voltage responses from hybrids of carbon nanotubes and poly(3,4-ethylenedioxythiophene) with tetrakis(dimethylamino)ethylene10.1002/adma.201502950 ↗
13. Modeling of thermoelectric properties of SiGe alloy nanowires and estimation of the best design parameters for high figure-of-merits10.1063/1.4906226 ↗
14. Harvesting waste thermal energy using a carbon-nanotube-based thermo-electrochemical cell10.1021/nl903267n ↗
15. High-efficiency electrochemical thermal energy harvester using carbon nanotube aerogel sheet electrodes10.1038/ncomms10600 ↗
16. Electrical power from nanotube and graphene electrochemical thermal energy harvesters10.1002/adfm.201101639 ↗
17. Charging-free electrochemical system for harvesting low-grade thermal energy10.1073/pnas.1415097111 ↗
18. Enhanced thermo-electrochemical power using carbon nanotube additives in ionic liquid redox electrolytes10.1039/C4TA04749D ↗
19. Huge Seebeck coefficients in nonaqueous electrolytes10.1063/1.3561735 ↗
20. Ionic thermoelectric supercapacitors10.1039/C6EE00121A ↗
21. Harvesting waste heat in unipolar ion conducting polymers10.1021/acsmacrolett.5b00829 ↗
22. Charging of heated colloidal particles using the electrolyte Seebeck effect10.1103/PhysRevLett.108.118301 ↗
23. Transport in charged colloids driven by thermoelectricity10.1103/PhysRevLett.101.108302 ↗
24. Collective thermoelectrophoresis of charged colloids
25. Large thermoelectric figure-of-merits from SiGe nanowires by simultaneously measuring electrical and thermal transport properties10.1021/nl300587u ↗
26. Thermal transport driven by extraneous nanoparticles and phase segregation in nanostructured Mg2(Si,Sn) and estimation of optimum thermoelectric performance10.1021/acsami.5b12060 ↗
27. Ultrathin two-dimensional atomic crystals as stable interfacial layer for improvement of lithium metal anode10.1021/nl503125u ↗
28. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
29. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
30. Atomistic simulation of water percolation and proton hopping in nafion fuel cell membrane10.1021/jp103398b ↗
31. Molecular dynamics simulations of proton transport in 3M and nafion perfluorosulfonic acid membranes10.1021/jp400693g ↗
32. Temperature dependence of ion and water transport in perfluorinated ionomer membranes for fuel cells10.1021/jp045624w ↗
33. Thermodynamics and proton transport in nafion: II. Proton diffusion mechanisms and conductivity10.1149/1.1859814 ↗
34. Mass transfer through polymer membranes due to a temperature gradient10.1016/S0376-7388(00)82079-7 ↗
35. Investigation of temperature-driven water transport in polymer electrolyte fuel cell: phase-change-induced flow10.1149/1.3046136 ↗
36. Thermo-osmosis of mixtures of water and methanol through a Nafion membrane10.1016/j.memsci.2005.08.010 ↗
37. Single-ion heat of transport in electrolyte solutions: a hydrodynamic theory10.1021/j100342a073 ↗
38. Very large thermal separations for polyelectrolytes in salt solutions10.1039/ft9949001909 ↗
39. Transport properties of poly(vinyl alcohol) membranes of different degrees of crystallinity. I. Pervaporation results10.1002/app.1993.070490203 ↗
40. 2008
41. Layer-by-layer self-assembly of PDDA/PWA-Nafion composite membranes for direct methanol fuel cells10.1039/b912779h ↗
42. The effects of sulfonated poly(ether ether ketone) ion exchange preparation conditions on membrane properties10.3390/membranes3030182 ↗
43. Solvent casting effects of sulfonated poly(ether ether ketone) for Polymer electrolyte membrane fuel cell10.1016/j.memsci.2011.12.008 ↗
44. Sulfonated poly(ether ether ketone)/mesoporous silica hybrid membrane for high performance vanadium redox flow battery10.1016/j.jpowsour.2014.01.127 ↗