Photonic sintering of inkjet printed current collecting grids for organic solar cell applications
Source abstract
Abstract
Abstract ITO-free organic solar cells with inkjet printed current collecting grids are demonstrated. For sintering those grids, thermal treatment and its faster alternative, photonic flash sintering, are applied and the characteristics of the resulting metal structures are compared with each other. The electrical potentials and resulting currents in the devices with different sintering conditions are calculated. The flash sintered current collecting grids exhibit clear advantages over thermally sintered grids in terms of geometry and conductivity. Similar conductivities are obtained after 5 s of flash sintering and 6 h of thermal sintering. This finding demonstrates the great potential of flash sintering for the roll-to-roll manufacturing of printed organic solar cells on flexible substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
2. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
3. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
4. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
5. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
6. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
7. Y. Galagan, R. Andriessen, E. Rubingh, N. Grossiord, P. Blom, S. Veenstra, W. Verhees, J. Kroon, Presented at Lope-C, Frankfurt, Germany, June, 2011.
8. Triggering the sintering of silver nanoparticles at room temperature10.1021/nn901868t ↗
9. Room temperature preparation of conductive silver features using spin-coating and inkjet printing10.1039/B917266A ↗
10. Scaling and optimization of gravure-printed silver nanoparticle lines for printed electronics10.1109/TCAPT.2009.2021464 ↗
11. Solvent and substrate effects on inkjet printed dots and lines of silver nanoparticle colloids10.1088/0960-1317/21/4/045012 ↗
12. Inkjet printed nanoparticle microelectromechanical systems10.1109/84.982863 ↗
13. Thermal cure effects on electrical performance of nanoparticle silver inks10.1016/j.actamat.2007.07.040 ↗
14. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
15. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
16. All-inkjet printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles10.1088/0957-4484/18/34/345202 ↗
17. Low temperature nanoparticle sintering with continuous wave and pulse lasers10.1016/j.optlastec.2010.08.002 ↗
18. Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics10.1016/j.mee.2010.12.099 ↗
19. Electrical sintering of nanoparticle structures10.1088/0957-4484/19/17/175201 ↗
20. Microwave flash sintering of inkjet printed silver tracks on polymer substrates10.1002/adma.200901081 ↗
21. Inkjet printing and microwave sintering of conductive silver tracks10.1002/adma.200502422 ↗
22. Contactless electrical sintering of silver nanoparticles on flexible substrates10.1109/TMTT.2011.2123910 ↗
23. Roll-to-roll compatible sintering of inkjet printed features by photonic and microwave exposure: from non-conductive ink to 40% bulk silver conductivity in less than 15s10.1002/adma.201104417 ↗
24. Argon plasma sintering of inkjet printed silver tracks on polymer substrates10.1039/b823329b ↗
25. Inkjet printing and low temperature sintering of CuO and CdS as functional electronic layers and Schottky diodes10.1039/c1jm11237f ↗
26. F.V. Assche, H. Rooms, E. Young, J. Michels, T.V. Mol, G. Rietjens, P.V.D. Weijer, P. Bouten, Thin-film barrier on foil for organic LED lamps, Presented at AIMCAL Fall Technical Conference and 22nd International Vacuum Web Coating Conference, vol. 3, 2008, pp. 1152–1173.
27. M. Klokkenburg, G.T. van Heck, E. Rubingh, T. van Lammeren, H.A. J.M. Andriessen, PCT Eur. Appl. WO 2010/0361116 (2010).
28. Thin film encapsulated transparent organic light emitting diodes10.1557/PROC-1091-AA13-08 ↗
29. Absorption layers of ink vehicles for inkjet printed lines with low electrical resistance10.1039/c2ra21442c ↗
30. Evaluation of inkjet printed current collecting grids and busbars for ITO-free organic solar cells10.1016/j.solmat.2012.04.039 ↗
31. Current collecting grids for ITO-free solar cells10.1002/aenm.201100552 ↗
32. Study of organic photovoltaics by localized concentrated sunlight: towards optimization of charge collection in large-area solar cells10.1063/1.3656276 ↗
33. R. Abbel, T. Van Lammeren, R. Hendriks, J, Ploegmakers, E.J. Rubingh, E.R. Meinders, W.A. Groen, Photonic flash sintering of silver nanoparticle inks – a fast and convenient method for the preparation of highly conductive structures on foil, MRS Commun., submitted to publication.
34. http://www.mit.edu/~6.777/matprops/pecvd_sin.htm.