journal article·2012-09

Optimization of inkjet printed PEDOT:PSS thin films through annealing processes

Zhaoting Xiong, Changqing Liu

Organic Electronics· Volume 13· Issue 9
Publisher page

Abstract

Abstract PEDOT:PSS is a conductive polymer blend which is widely used as a thin functional film in the fabrication of electronic devices. Modification of PEDOT:PSS properties is usually required to enhance their performance which demands further research to gain a complete understanding. This paper is concerned with the optimization of PEDOT:PSS thin films produced by inkjet printing which is deemed as a very promising fabrication technology. Both thermal and solvent annealing were utilized to optimize the ink-jetted PEDOT:PSS thin films. It has been found that thermal annealing is relatively ineffective for the improvement of conductivity and transparency of the thin films. However, solvent annealing is introduced for inkjet printing combined with subsequent thermal annealing has induced a further increase of conductivity in the thin film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Research progress on a novel conductive polymer – poly(3,4-ethylenedioxythiophene) (PEDOT)10.1088/1742-6596/152/1/012023 ↗
2. The Ossila Organic Photovoltaic Fabrication Guide – PEDOT:PSS, available on line:http://www.ossila.com/ support/Fab_pedot_pss.php. 2011.
3. Flexible organic photovoltaics using conducting polymer electrodes10.1063/1.1867568 ↗
4. Effects of layer thickness and annealing of PEDOT:PSS layers in organic photodetectors10.1021/ma901182u ↗
5. Polymer photovoltaic cells with conducting polymer anodes10.1002/1521-4095(20020503)14:9<662::AID-ADMA662>3.0.CO;2-N ↗
6. Direct writing technology – advances and developments10.1016/j.cirp.2008.09.006 ↗
7. Inkjet printing for materials and devices10.1021/cm0101632 ↗
8. High-sheer-rate capillary viscometer for inkjet inks10.1063/1.3449478 ↗
9. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
10. Thermal and electromagnetic behaviour of doped poly(3,4-ethylenedioxythiophene) films10.1021/jp9720101 ↗
11. Conductivity degradation study of PEDOT:PSS films under heat treatment in Helium and atmospheric air10.4236/ojopm.2012.21002 ↗
12. On the conductivity of PEDOT:PSS thin films
13. Morphology and conductivity of PEDOT/PSS films studied by scanning-tunneling microscopy10.1016/j.cplett.2004.07.035 ↗
14. Understanding tapping-mode atomic force microscopy data on the surface of soft block copolymers10.1016/S0039-6028(03)00388-1 ↗
15. The origin of the high conductivity of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT–PSS) plastic electrodes10.1021/cm061032+ ↗
16. Transparent, conductive polymer blend coatings from latex-based dispersions10.1016/j.porgcoat.2007.01.019 ↗
17. Thermal degradation mechanisms of PEDOT:PSS10.1016/j.orgel.2008.10.008 ↗
18. Characterization of the PEDOT–PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
19. Berend-Jan de Gans and US Schubert, Ink-jet printing of polymers – from single dots to thin film libraries10.1039/b407478e ↗
20. A morphological model for the solvent-enhanced conductivity of PEDOT:PSS thin films10.1002/adfm.200700796 ↗
21. PEDOT:PSS films with significantly enhanced conductivities induced by preferential salvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
22. Correlation of morphology charge transport in poly(3,4-ethylenedioxy-thiophene)-polystyrenesulfonic acid (PEDOT–PSS) films10.1088/0953-8984/21/7/072101 ↗
23. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗