journal article·2015-04

Room temperature NO2 gas sensing properties of DBSA doped PPy–WO3 hybrid nanocomposite sensor

A.T. Mane, S.T. Navale, V.B. Patil

Publisher page

Abstract

Abstract We demonstrate the chemiresistive NO 2 gas sensor based on DBSA doped PPy–WO 3 hybrid nanocomposites operating at room temperature. The sensor was fabricated on glass substrate using simple and cost effective drop casting method. The gas sensing performance of sensor was studied for various toxic/flammable analytes like NO 2 , C 2 H 5 OH, CH 3 OH, H 2 S and NH 3 . The sensor shows higher selectivity towards NO 2 gas with 72% response at 100 ppm. Also the sensor can successfully detect low concentration of NO 2 gas upto 5 ppm with reasonable response of 12%. Structural, morphological and compositional analyses evidenced the successful formation of DBSA doped PPy–WO 3 hybrid nanocomposite with uniform dispersion of DBSA into PPy–WO 3 hybrid nanocomposite and enhance the gas sensing behavior. We demonstrated that DBSA doped PPy–WO 3 hybrid nanocomposite sensor films shows excellent reproducibility, high stability, moderate response and recovery time for NO 2 gas in the concentration range of 5–100 ppm. A gas sensing mechanism based on the formation of random nano p–n junctions distributed over the surface of the sensor film has been proposed. In addition modulation of depletion width takes place in sensor on interaction with the target NO 2 gas has been depicted on the basis of schematic energy band diagram. Impedance spectroscopy was employed to study bulk, grain boundary resistance and capacitance before and after exposure of NO 2 gas. The structural and intermolecular interaction within the hybrid nanocomposites were explored by Raman and X-ray photoelectron spectroscopy (XPS), while field emission scanning electron microscopy (FESEM) was used to characterize surface morphology. The present method can be extended to fabricate other organic dopent-conducting polymer–metal oxide hybrid nanocomposite materials and could find better application in the gas sensing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Air pollution monitoring using tin-oxide-based microreactor systems10.1016/S0925-4005(00)00516-5 ↗
2. High sensitivity NO2 sensors for environmental monitoring produced using laser ablated nanocrystalline metal oxides10.1016/S0925-4005(02)00114-4 ↗
3. A semiconducting metal oxide sensor array for the detection of NOx and NH310.1016/S0925-4005(01)00680-3 ↗
4. Nanocrystalline TiO2 thin films for NH3 monitoring: microstructural and physical characterization
5. NO2 sensing properties of nanostructured tungsten oxide thin films10.1016/j.ceramint.2014.08.001 ↗
6. H2S sensing properties of noble metal doped WO3 thin film sensor fabricated by micromachining10.1016/S0925-4005(01)00958-3 ↗
7. H2S sensors based on tungsten oxide nanostructures10.1016/j.snb.2007.07.013 ↗
8. Nano-crystalline Fe2O3 thin films for ppm level detection of H2S10.1016/j.snb.2013.02.013 ↗
9. Novel root for fabrication of nanostructured α-Fe2O3 gas sensor10.1016/j.mssp.2013.08.016 ↗
10. SnO2 thin films for NO2 gas sensing applications10.1016/j.ceramint.2013.04.047 ↗
11. WO3 sensor response according to operating temperature: experiment and modeling10.1016/j.snb.2006.11.036 ↗
12. Structural stability and phase transition in WO3 thin films
13. Influence of the annealing and operating temperatures on the gas-sensing properties of rf sputtered WO3 thin-film sensors”
14. WO3 sputtered thin films for NOx monitoring10.1016/0925-4005(94)01563-W ↗
15. On-line monitoring of CO2 quality using doped WO3 thin film sensors10.1016/j.tsf.2005.11.021 ↗
16. Polymers in sensor applications10.1016/j.progpolymsci.2004.03.002 ↗
17. Facile method of synthesis of polyaniline–SnO2 hybrid nanocomposites: microstructural, optical and electrical transport properties10.1016/j.synthmet.2013.06.022 ↗
18. Guided growth of nanoscale conducting polymer structures on surface-functionalized nanopatterns10.1021/ja057500i ↗
19. Synthesis, property and field emission behaviour of amorphous polypyrrole nanowires10.1088/0957-4484/17/14/017 ↗
20. Electrical properties of polypyrrole gas sensors fabricated under various pre-treatment conditions10.1016/j.snb.2003.06.002 ↗
21. Conducting polymers in electronic chemical sensors
22. Room temperature NO2 gas sensor based on PPy/α-Fe2O3hybrid nanocomposites10.1016/j.ceramint.2013.12.153 ↗
23. Conducting polymer nanocomposites: a brief overview10.1021/cm990537f ↗
24. Hybrid organic–inorganic materials – in search of synergic activity10.1002/1521-4095(200102)13:3<163::AID-ADMA163>3.0.CO;2-U ↗
25. Synthesis of multi-dimensional ZnO nanostructures in aqueous medium for the application of gas sensor10.1016/j.snb.2012.11.100 ↗
26. Camphor sulfonic acid (CSA) doped polypyrrole (PPy) films: measurement of microstructural and optoelectronic properties10.1016/j.measurement.2014.01.012 ↗
27. Fussy nanofibrous network of polyaniline (PANi) for NH3 detection10.1016/j.synthmet.2012.08.022 ↗
28. Nitrogen dioxide (NO2) sensing performance of p-polypyrrole/n-tungsten oxide hybrid nanocomposites at room temperature10.1016/j.orgel.2014.10.045 ↗
29. Influence of SiC/Si3N4 hybrid on polymer tensile properties10.1016/j.compscitech.2009.04.024 ↗
30. CSA doped polyaniline/CdS organic–inorganic nanohybrid: physical and gas sensing properties10.1016/j.ceramint.2012.03.064 ↗
31. Synthesis and characterization of ultrathin WO3 nanodisks utilizing long-chain poly(ethylene glycol)10.1021/jp064777b ↗
32. Identification of oxidized polypyrrole on Raman spectrum10.1016/S0379-6779(00)00188-0 ↗
33. Chemical synthesis of polypyrrole: structure–properties relationship10.1016/S0379-6779(98)00180-5 ↗
34. Camphor sulfonic acid doped PPy/α-Fe2O3 hybrid nanocomposites as NO2 sensors10.1039/c4ra02924k ↗
35. X-ray photoelectron spectroscopy
36. Study of over oxidized polypyrrole using X-ray photoelectron spectroscopy10.1016/0032-3861(94)90503-7 ↗
37. Polypyrrole thin film: room temperature ammonia gas sensor10.1109/JSEN.2011.2112765 ↗
38. Synthesis and characterization of polypyrrole doped with anionic spherical polyelectrolyte brushes10.3144/expresspolymlett.2012.75 ↗
39. Electrochemical deposition of hierarchical micro/nanostructures of copper hydroxysulfates on polypyrrole–polystyrene sulfonate films10.1021/jp200465n ↗
40. ESCA and SIMS studies of plasma treatments of intraocular lenses10.1002/sia.740170202 ↗
41. Tungsten trioxide (WO3) sputtered thin films for a NOx gas sensor10.1016/S0925-4005(98)00149-X ↗
42. Sol–gel derived Co3O4 thin films: effect of annealing on structural, morphological and opto-electronic properties10.1007/s10854-011-0491-x ↗
43. Tunable electronic transport characteristics of surface-architecture-controlled ZnO nanowire field effect transistors10.1021/nl0731116 ↗
44. Room temperature gas sensing properties of cadmium sulfide thin film based sensor for detection of NO2 gas10.1039/C4RA06531J ↗
45. Polypyrrole, α-Fe2O3 and their hybrid nanocomposite sensor: an impedance spectroscopy study10.1016/j.orgel.2014.06.019 ↗
46. Detection of reducing gases by SnO2 thin films: an impedance spectroscopy study10.1016/j.snb.2004.10.024 ↗