Preparation and thermoelectric properties of PEDOT:PSS coated Te nanorod/PEDOT:PSS composite films
Source abstract
Abstract
Abstract PEDOT:PSS coated Te (PC Te) nanorod/PEDOT:PSS composite films were prepared by a drop-casting technique. H2SO4 treatment was employed to enhance thermoelectric (TE) properties of the composite films. The addition of PC Te nanorods increased both the electrical conductivity and the Seebeck coefficient of the composite films. An optimized power factor of 141.9 μW/mK2 was obtained for the film containing 90 wt% PC Te nanorods treated with 12 M H2SO4 at room temperature, which was 2.75 times as high as that of the untreated composite film, corresponding to the electrical conductivity and Seebeck coefficient of 204.6 S/cm and 83.27 μV/K, respectively. XPS and GIWAXS analysis revealed the removal of insulating PSS units and the rearrangement of PEDOT chains after the H2SO4 treatment. Finally, a 9-leg TE generator prototype was fabricated using the optimized composite film. The maximum output power and area output power density produced from the prototype were 47.7 nW and 57.2 μW/cm2, respectively, at the temperature difference of 40 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced battery technologies research · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Flexible n-type high-performance thermoelectric thin films of poly(nickel-ethylenetetrathiolate) prepared by an electrochemical method10.1002/adma.201505922 ↗
2. Research progress on conducting polymer based supercapacitor electrode materials10.1016/j.nanoen.2017.04.040 ↗
3. Synthesis and characterization of transparent conducting SWCNT/PEDOT:PSS composite films by spin coating technique10.1016/j.ijleo.2017.10.174 ↗
4. Significant enhancement in the thermoelectric properties of PEDOT:PSS films through a treatment with organic solutions of inorganic salts10.1021/acsami.6b07234 ↗
5. Efficient solution-processed bulk heterojunction perovskite hybrid solar cells10.1002/aenm.201402024 ↗
6. Conductive polymers for thermoelectric power generation10.1016/j.pmatsci.2017.09.004 ↗
7. A review on organic polymer-based thermoelectric materials10.1007/s10924-016-0895-z ↗
8. Recent progress on nanostructured conducting polymers and composites: synthesis, application and future aspects10.1007/s40843-017-9206-4 ↗
9. Research progress on polymer–inorganic thermoelectric nanocomposite materials10.1016/j.progpolymsci.2011.11.003 ↗
10. Influence of polymerization method on the thermoelectric properties of multi-walled carbon nanotubes/polypyrrole composites10.1016/j.synthmet.2015.11.013 ↗
11. Promising thermoelectric properties of commercial PEDOT:PSS materials and their Bi2Te3 powder composites10.1021/am100654p ↗
12. One-step synthesis and enhanced thermoelectric properties of polymer-quantum dot composite films10.1002/anie.201802681 ↗
13. Increased power factors of organic–inorganic nanocomposite thermoelectric materials and the role of energy filtering10.1039/C7TA02307C ↗
14. Manufacturing Te/PEDOT films for thermoelectric applications10.1021/acsami.7b03710 ↗
15. Thermoelectric performance of PEDOT:PSS/Bi2Te3-nanowires: a comparison of hybrid types10.1007/s10854-015-3952-9 ↗
16. Water-processable polymer-nanocrystal hybrids for thermoelectrics10.1021/nl102880k ↗
17. Enhanced thermoelectric performance of PEDOT:PSS flexible Bulky papers by treatment with secondary dopants10.1021/am507032e ↗
18. Highly conductive PEDOT: PSS nanofibrils induced by solution-processed crystallization10.1002/adma.201304611 ↗
19. Sulfuric acid vapor treatment for enhancing the thermoelectric properties of PEDOT:PSS thin-films10.1007/s10854-016-4538-x ↗
20. Explaining the effects of processing on the electrical properties of PEDOT:PSS10.1016/j.orgel.2014.10.029 ↗
21. Simultaneously enhanced electrical conductivity and Seebeck coefficient in Poly (3,4-ethylenedioxythiophene) films treated with hydroiodic acid10.1016/j.synthmet.2016.07.023 ↗
22. Design and fabrication of low resistance palm-power generator based on flexible thermoelectric composite film10.1016/j.synthmet.2017.11.010 ↗
23. Tuning the thermoelectric properties of a conducting polymer through blending with open-shell molecular dopants10.1021/acsami.5b05860 ↗
24. Highly electrical and thermoelectric properties of a PEDOT:PSS thin-film via direct dilution-filtration10.1039/C5RA07820B ↗
25. Green DES mixture as a surface treatment recipe for improving the thermoelectric properties of PEDOT:PSS films10.1016/j.synthmet.2015.08.006 ↗
26. A facile chemical reduction approach for effectively tuning thermoelectric properties of PEDOT films10.1016/j.orgel.2014.12.007 ↗
27. Simple layer-by-layer assembly method for simultaneously enhanced electrical conductivity and thermopower of PEDOT:PSS/ce-MoS2 heterostructure films10.1021/acsaem.8b00315 ↗
28. Enhancement of the thermoelectric properties of PEDOT:PSS via one-step treatment with cosolvents or their solutions of organic salts10.1039/C7TA11148G ↗
29. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
30. Significant electronic thermal transport in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1002/adma.201404738 ↗
31. Enhanced thermoelectric properties of PEDOT/PSS/Te composite films treated with H2SO410.1007/s11051-016-3701-x ↗
32. Preparation and properties of PEDOT:PSS/Te nanorod composite films for flexible thermoelectric power generator10.1016/j.energy.2017.01.037 ↗
33. Carrier scattering at alloy nanointerfaces enhances power factor in PEDOT:PSS hybrid Thermoelectrics10.1021/acs.nanolett.6b01009 ↗
34. Solution synthesis of telluride-based nano-barbell structures coated with PEDOT:PSS for spray-printed thermoelectric generators10.1039/C5NR07032E ↗
35. High-performance thermoelectric paper based on double Carrier-filtering processes at nanowire heterojunctions10.1002/aenm.201502181 ↗
36. Engineered nanocarbon mixing for enhancing the thermoelectric properties of a telluride-PEDOT:PSS nanocomposite10.1039/C7TA04280A ↗
37. PEDOT:PSS film: a novel flexible organic electrode for facile electrodeposition of dendritic tellurium nanostructures10.1007/s10853-015-8818-2 ↗
38. Electronic, chemical and structural change induced by organic solvents in tosylate-doped poly(3,4-ethylenedioxythiophene) (PEDOT-OTs)10.1016/j.synthmet.2004.12.011 ↗
39. Effect of solvent on PEDOT/PSS nanometer-scaled thin films: XPS and STEM/AFM studies10.1016/j.synthmet.2009.07.032 ↗
40. One-pot sequential electrochemical deposition of multilayer poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonic acid)/tungsten trioxide hybrid films and their enhanced electrochromic properties10.1039/C3TA14781A ↗
41. Thermoelectric power factor optimization in PEDOT:PSS tellurium nanowire hybrid composites10.1039/c3cp44558e ↗
42. Carbon-nanotube-based thermoelectric materials and devices10.1002/adma.201704386 ↗
43. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
44. Enhancement of thermoelectric properties of PEDOT:PSS and tellurium-PEDOT:PSS hybrid composites by simple chemical treatment10.1038/srep18805 ↗
45. The crystallization of PEDOT:PSS polymeric electrodes probed in situ during printing10.1002/adma.201500315 ↗
46. Structure of thin films of poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(98)00315-4 ↗
47. Morphological change and mobility enhancement in PEDOT:PSS by adding co-solvents10.1002/adma.201205158 ↗
48. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
49. PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
50. Isolating the effect of torsional defects on mobility and band gap in conjugated polymers10.1021/jp8017919 ↗
51. Flexible prototype thermoelectric devices based on Ag2Te and PEDOT:PSS coated nylon fibre10.1039/C5NR00058K ↗
52. A simple thermoelectric device based on inorganic/organic composite thin film for energy harvesting10.1016/j.cej.2017.03.023 ↗
53. Polymer/carbon nanotube composite materials for flexible thermoelectric power generator10.1016/j.compscitech.2017.10.006 ↗
54. Thermoelectric devices: a review of devices, architectures, and contact optimization10.1002/admt.201700256 ↗