Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection
Source abstract
Abstract
Abstract This work presents a simple, low-cost and practical inkjet-printing technique for fabricating an innovative flexible gas sensor made of graphene–poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composite film with high uniformity over a large area. An electronic ink prepared by graphene dispersion in PEDOT:PSS conducting polymer solution is inkjet-printed on a transparency substrate with prefabricated electrodes and investigated for ammonia (NH3) detection at room temperature. Transmission electron microscopy, Fourier transform infrared spectroscopy, UV–visible spectrometer and Raman characterizations confirm the presence of few-layer graphene in PEDOT:PSS polymer matrix and the present of π–π interactions between graphene and PEDOT:PSS. The ink-jet printed graphene–PEDOT:PSS gas sensor exhibits high response and high selectivity to NH3 in a low concentration range of 25–1000 ppm at room temperature. The attained gas-sensing performance may be attributed to the increased specific surface area by graphene and enhanced interactions between the sensing film and NH3 molecules via π electrons network. The NH3-sensing mechanisms of the flexible printed gas sensor based on chemisorbed oxygen interactions, direct charge transfers and swelling process are highlighted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. R. Das, P. Harrop, Printed, organic & flexible electronics: forecasts, players & opportunities 2013–2023, IDTechEx Report, 2013.
2. Morphology and conductivity of PEDOT/PSS films studied by scanning–tunneling microscopy10.1016/j.cplett.2004.07.035 ↗
3. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
4. Flexible organic light emitting diodes based on double-layered graphene/PEDOT:PSS conductive film formed by spray-coating10.1016/j.vacuum.2013.07.034 ↗
5. Graphene-based nitrogen dioxide gas sensors10.1016/j.cap.2009.12.024 ↗
6. Carbon dioxide gas sensor using a graphene sheet10.1016/j.snb.2011.03.035 ↗
7. Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells10.1016/j.elecom.2008.08.007 ↗
8. Graphene–PEDOT:PSS on screen printed carbon electrode for enzymatic biosensing10.1016/j.jelechem.2013.07.012 ↗
9. Inkjet-printed graphene–PEDOT:PSS modified screen printed carbon electrode for biochemical sensing10.1039/c2jm14005e ↗
10. Inkjet-printed graphene–poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) modified on screen printed carbon electrode for electrochemical sensing of salbutamol10.1016/j.snb.2011.10.074 ↗
11. A facile one-step redox route for the synthesis of graphene/poly(3,4ethylenedioxythiophene) nanocomposite and their applications in biosensing10.1016/j.snb.2013.02.024 ↗
12. A hybrid material of graphene and poly(3,4-ethyldioxythiophene) with high conductivity, flexibility, and transparency10.1007/s12274-009-9032-9 ↗
13. Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors10.1007/s12274-011-0123-z ↗
14. Gas-sensing applications of W–Ti–O-based nanosized thin films prepared by r.f. reactive sputtering10.1016/S0925-4005(97)00173-1 ↗
15. Mechanism of drifts in H2S sensing properties of SnO2:CuO composite thin film sensors prepared by thermal evaporation10.1016/S0925-4005(03)00532-X ↗
16. Electrical and reducing gas sensing properties of ZnO and ZnO–CuO thin films fabricated by spin coating method10.1016/S0925-4005(99)00038-6 ↗
17. A highly sensitive and fast-responding SnO2 sensor fabricated by combustion chemical vapor deposition10.1021/cm050451o ↗
18. Screen-printed perovskite-type thick films as gas sensors for environmental monitoring10.1016/S0925-4005(99)00054-4 ↗
19. Novel flexible NH3 gas sensor prepared by ink-jet printing technique10.4028/www.scientific.net/AMR.506.39 ↗
20. Inkjet printing-process and its applications10.1002/adma.200901141 ↗
21. Inkjet-printed polymer films for the detection of organic vapors10.1109/JSEN.2006.884168 ↗
22. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
23. An inkjet-printed chemical fuse10.1063/1.1846950 ↗
24. Functionalized graphene/poly(3,4ethylenedioxythiophene)-polystyrenesulfonate as counter electrode catalyst for dye-sensitized solar cells10.1016/j.energy.2013.01.037 ↗
25. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
26. LPG sensing application of graphene/Bi2O3 quantum dots composites10.1016/j.solidstatesciences.2013.05.008 ↗
27. Thermoelectric properties of nanocomposite thin films prepared with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) and graphene10.1039/c2cp23517j ↗
28. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials10.1016/S0927-796X(00)00012-7 ↗
29. Conductivities enhancement of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) transparent electrodes with diol additives10.1007/s00289-012-0833-8 ↗
30. Raman spectral changes of PEDOT–PSS in polymer light-emitting diodes upon operation10.1016/j.cplett.2005.07.040 ↗
31. Conductivity enhancement of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) films post-spincasting10.1063/1.4768265 ↗
32. Surface-enhanced raman study of the interaction of PEDOT:PSS with plasmonically active nanoparticles10.1021/jp100135x ↗
33. Raman spectroscopy and imaging of graphene10.1007/s12274-008-8036-1 ↗
34. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
35. Adsorption properties of tetracycline onto graphene oxide: equilibrium, kinetic and thermodynamic studies10.1371/journal.pone.0079254 ↗
36. Mass production of carbon nanotube-reinforced polyacrylonitrile fine composite fibers10.1002/app.40302 ↗
37. Synthesis of PEDOT-modified graphene composite materials as flexible electrodes for energy storage and conversion applications10.1016/j.ijhydene.2012.05.017 ↗
38. Unusual infrared-absorption mechanism in thermally reduced graphene oxide10.1038/nmat2858 ↗
39. Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets10.1016/j.carbon.2006.06.004 ↗
40. Inkjet-printed graphene–poly(3,4ethylenedioxythiophene):poly(styrene-sulfonate) modified on screen printed carbon electrode for electrochemical sensing of salbutamol10.1016/j.snb.2011.10.074 ↗
41. Noncovalent functionalization of multiwalled carbon nanotube by a polythiophene-based compatibilizer: reinforcement and conductivity improvement in poly(vinylidene fluoride) films10.1021/jp302027y ↗
42. Electrodeposition of graphene oxide doped poly(3,4-ethylenedioxythiophene) film and its electrochemical sensing of catechol and hydroquinone10.1016/j.electacta.2012.08.099 ↗
43. Surfactant-free exfoliation of graphite in aqueous solutions10.1039/c3cc49273g ↗
44. Improvement in the photovoltaic efficiency of polymer solar cells by treating the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer with co-solvents of hydrophilic organic solvents and hydrophobic 1,2-dichlorobenzene10.1016/j.solmat.2011.09.039 ↗
45. Preparation and characterization of graphene composites with conducting polymers10.1002/pi.3152 ↗
46. Low temperature indium oxide gas sensors10.1016/j.snb.2006.04.020 ↗
47. Adsorption of ammonia on graphene10.1088/0957-4484/20/24/245501 ↗
48. Reduced graphene oxide–polyaniline hybrid: Preparation, characterization and its applications for ammonia gas sensing10.1039/c2jm34340a ↗
49. Using a PEDOT:PSS modified electrode for detecting nitric oxide gas10.1016/j.snb.2009.04.041 ↗
50. Gas sensors based on conducting polymers10.3390/s7030267 ↗
51. Room-temperature chemisorption mechanism of oxygen at CdS surfaces by photoconductivity investigations10.1002/pssa.19700010405 ↗
52. Ammonia gas sensing behavior of graphene surface decorated with gold nanoparticles10.1016/j.sse.2012.05.059 ↗
53. Enhanced sensitivity of ammonia sensor using graphene/polyaniline nanocomposite10.1016/j.snb.2013.01.014 ↗
54. Novel flexible chemical gas sensor based on poly(3,4-ethylene dioxythiophene) nanotube membrane10.1016/j.talanta.2010.06.058 ↗
55. Gas-sensing characteristics of dielectrophoretically assembled composite film of oxygen plasma-treated SWCNTs and PEDOT/PSS polymer10.1016/j.snb.2012.12.085 ↗
56. Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)–poly(styrenesulfonate): a photoelectron spectroscopy study10.1002/polb.10659 ↗