journal article·2009-08

All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps

Frederik C. Krebs

Organic Electronics· Volume 10· Issue 5
Publisher page

Abstract

Abstract A roll-to-roll process enabling fabrication of polymer solar cells comprising five layers on flexible substrates is presented. The device geometry is inverted and allow for fabrication on both transparent and non-transparent flexible substrates. The process is illustrated in this work by formation of a bottom electrode comprising silver nanoparticles on a 130 micron thick polyethyleneternaphthalate (PEN) substrate. Subsequently an electron transporting layer of zinc oxide nanoparticles was applied from solution followed by an active layer of P3HT-PCBM and a hole transporting layer of PEDOT:PSS. These first four layers were applied by slot-die coating. The final electrode was applied by screen printing a grid structure that allowed for transmission of 80% of the light. The materials were patterned into stripes allowing for formation of a single cell device and serially connected modules comprising 2, 3 and 8 stripes. All five layers in the device were processed from solution in air and no vacuum steps were employed. An additional advantage is that the use of indium-tin-oxide (ITO) is avoided in this process. The devices were tested under simulated sunlight (1000 W m−2, AM1.5G) and gave a typical performance 0.3% in terms of power conversion efficiency (PCE) for the active layer. The low PCE was due to poor transmission of light through the back electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Thompson · Angew. Chem. Intl. Ed. · 2008 · 47 · 5810.1002/anie.200702506 ↗
2. Jørgensen · Sol. Energy Mater. Sol. Cells · 2008 · 92 · 68610.1016/j.solmat.2008.01.005 ↗
3. Krebs · Sol. Energy Mater. Sol. Cells · 2009 · 93 · 39410.1016/j.solmat.2008.10.004 ↗
4. Ma · Adv. Funct. Mater. · 2005 · 15 · 161710.1002/adfm.200500211 ↗
5. Yang · Nanoletters · 2005 · 5 · 57910.1021/nl048120i ↗
6. Krebs · Chem. Mater. · 2005 · 17 · 523510.1021/cm051320q ↗
7. Krebs · Prog. Photovolt. Res. Appl. · 2007 · 15 · 69710.1002/pip.794 ↗
8. Krebs · Sol. Energy Mater. Sol. Cells · 2008 · 92 · 71510.1016/j.solmat.2008.01.013 ↗
9. Katz · Eur. Phys. J. Appl. Phys. · 2006 · 36 · 30710.1051/epjap:2006159 ↗
10. Hauch · Sol. Energy Mater. Sol. Cells · 2008 · 92 · 72710.1016/j.solmat.2008.01.004 ↗
11. Krebs · Sol. Energy Mater. Sol. Cells · 2009 · 93 · 46510.1016/j.solmat.2008.12.012 ↗
12. Blankenburg · Sol. Energy Mater. Sol. Cells · 2009 · 93 · 47610.1016/j.solmat.2008.12.013 ↗
13. F.C. Krebs, S.A. Gevorgyan, J. Alstrup, J. Mater. Chem., doi:10.1039/B823001C.10.1039/b823001c ↗
14. Krebs · Sol. Energy Mater. Sol. Cells · 2009 · 93 · 42210.1016/j.solmat.2008.12.001 ↗
15. Winther-Jensen · Sol. Energy Mater. Sol. Cells · 2006 · 90 · 12310.1016/j.solmat.2005.02.004 ↗
16. Aernouts · Thin Solid Films · 2004 · 451–452 · 2210.1016/j.tsf.2003.11.038 ↗
17. Tvingstedt · Adv. Mater. · 2007 · 19 · 289310.1002/adma.200602561 ↗
18. Strange · Sol. Energy Mater. Sol. Cells · 2008 · 92 · 80510.1016/j.solmat.2008.02.002 ↗
19. Zimmermann · Sol. Energy Mater. Sol. Cells · 2007 · 91 · 37410.1016/j.solmat.2006.10.005 ↗
20. McCullough · J. Org. Chem. · 1993 · 58 · 90410.1021/jo00056a024 ↗
21. Krebs · Nanotechnology · 2008 · 19 · 42401310.1088/0957-4484/19/42/424013 ↗
22. Thermo-cleavable solvents for printing of conjugated polymers: application in polymer solar cells10.1016/j.solmat.2008.12.018 ↗
23. F.C. Krebs, M. Jørgensen, Decomposable vehicles in printing or coating compositions, WO2007118850 A1 (filing date 13.04.2007).10.18261/ISSN1501-5580-2007-04-08 ↗
24. H. Womelsdorf, W. Hoheisel, G. Passing, Nanopartikuläres, redispergierbares Fällungsoxid German Patent Specification 19907704 A1, 1999 (filing date: 23.02.1999).
25. H. Womelsdorf, W. Hoheisel, G. Passing, Process for producing nanoparticulate, redispersible zinc oxide gels European Patent Specification 1157064 B1 (filing date: 11.02.2000).
26. H. Womelsdorf, W. Hoheisel, G. Passing, Nanoparticulate, redispersible zinc oxide gels US Patent Specification 6,710,091 B1 (patent date: 23.03.2004).
27. Beek · J. Phys. Chem. B · 2005 · 109 · 950510.1021/jp050745x ↗
28. Riede · Prog. Photovolt.: Res. Appl. · 2008 · 16 · 56110.1002/pip.836 ↗
29. Liu · J. Am. Chem. Soc. · 2004 · 126 · 948610.1021/ja047452m ↗
30. Bjerring · Macromolecules · 2007 · 40 · 601210.1021/ma071200z ↗
31. Bjerring · Sol. Energy Mater. Sol. Cells · 2008 · 92 · 77210.1016/j.solmat.2007.11.008 ↗
32. Andreasen · Macromolecules · 2007 · 40 · 775810.1021/ma0714823 ↗
33. Jakobsen · Thin Solid Films · 2008 · 516 · 220310.1016/j.tsf.2007.07.152 ↗
34. Gevorgyan · Chem. Mater. · 2008 · 20 · 438610.1021/cm800431s ↗
35. Hagemann · Sol. Energy Mater. Sol. Cells · 2008 · 92 · 132710.1016/j.solmat.2008.05.005 ↗
36. Petersen · Macromolecules · 2008 · 41 · 898610.1021/ma801932a ↗
37. Han · Adv. Mater. · 2007 · 19 · 169710.1002/adma.200601828 ↗
38. Nguyen · Sol. Energy Mater. Sol. Cells · 2006 · 90 · 281510.1016/j.solmat.2006.04.005 ↗
39. Banishoeib · Sol. Energy Mater. Sol. Cells · 2007 · 91 · 102610.1016/j.solmat.2007.02.013 ↗
40. Banishoeib · Thin Solid Films · 2008 · 516 · 397810.1016/j.tsf.2007.08.001 ↗