journal article·2001-03Open access

Device physics of organic light-emitting diodes based on molecular materials

Wolfgang Brütting, Stefan Berleb, Anton G. Mückl

Organic Electronics· Volume 2· Issue 1

Abstract

Abstract Electrical transport in single- and hetero-layer organic light-emitting diodes based on aromatic amines like N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine (TPD) or N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-biphenyl-4,4′-diamine (NPB) and the aluminium chelate complex Alq (tris(8-hydroxyquinolato)aluminium) has been investigated as a function of temperature and organic layer thickness. It is shown that the thickness dependence of the current–voltage (I–V) characteristics provides a unique criterion to discriminate between (1) injection limited behaviour, (2) trap-charge limited conduction with an exponential trap distribution and a field-independent mobility, and (3) trap-free space-charge limited conduction (SCLC) with a field and temperature dependent mobility. The I–V characteristics of NPB-based hole-only devices with indium–tin oxide anodes are neither purely injection nor purely space-charge limited, although the current shows a square-law dependence on the applied voltage. In Al/Alq/Ca electron-only devices with Alq thickness in the range 100–350 nm the observed thickness and temperature dependent I–V characteristics can be described by SCLC with a hopping-type charge carrier mobility. Additionally, trapping in energetically distributed trap states is involved at low voltages and for thick layers. The electric field and temperature dependence of the charge carrier mobility in Alq has been independently determined from transient electroluminescence. The obtained values of the electron mobility are consistent with temperature dependent I–V characteristics and can be described by both the phenomenological Poole–Frenkel model with a zero-field activation energy ΔE=0.4–0.5 eV and the Gaussian disorder model with a disorder parameter σ=100 meV. Measurements of the bias-dependent capacitance in NPB/Alq hetero-layer devices give clear evidence for the presence of negative charges with a density of about 6.8×10 11 cm −2 at the organic–organic interface under large reverse bias. This leads to a non-uniform electric field distribution in the hetero-layer device, which has to be considered in device description.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A. Bernanose, Electroluminescence of organic compounds, Brit. J. Appl. Phys. Suppl. 4 (1955) S5410.1088/0508-3443/6/S4/319 ↗
2. Electroluminescence in organic crystals10.1063/1.1733929 ↗
3. Recombination radiation in anthracene crystals10.1103/PhysRevLett.14.229 ↗
4. A simple organic electroluminescent diode10.1109/PROC.1970.7655 ↗
5. Pope · 1982
6. Electroluminescence in organics10.1088/0022-3727/32/24/201 ↗
7. Vityuk · Sov. Phys. Semicond. · 1973 · 6 · 1479
8. Electrical conduction and low voltage blue electroluminescence in vacuum-deposited organic films
9. Electroluminescence photoluminescence and electroabsorption of a lightly substituted anthracene langumuir film10.1016/0038-1098(79)90728-2 ↗
10. Electroluminescence from polyvinylcarbazole films:3 Electroluminescent devices10.1016/0032-3861(83)90014-9 ↗
11. Organic electroluminescent diodes10.1063/1.98799 ↗
12. Electroluminescence of doped organic thin films10.1063/1.343409 ↗
13. Electroluminescence in organic films with three-layer structure10.1143/JJAP.27.L269 ↗
14. Organic electroluminescent device with a three-layer structure10.1143/JJAP.27.L713 ↗
15. Electroluminescence mechanism of organic thin film devices
16. Pioneer Co. Japan, In November 1997 Pioneer Co. in Japan commercialized a monochrome 256×64 dot matrix OLED display for automotive applications
17. Organic LED full color passive-matrix display10.1016/S0022-2313(99)00229-X ↗
18. Organic displays10.1088/2058-7058/12/3/26 ↗
19. Light-emitting diodes based on conjugated polymers10.1038/347539a0 ↗
20. Application of polymer light-emitting materials in light-emitting diodes, backlights and displays10.1016/S0165-5817(98)00018-7 ↗
22. Light emitting diodes based on poly-p-phenylene-vinylene: I Charge-carrier injection and transport10.1063/1.366003 ↗
23. Light emitting diodes based on poly-p-phenylene-vinylene: II Impedance spectroscopy10.1063/1.366004 ↗
24. Doping in PPV light-emitting devices fabricated on different substrates10.1016/S0301-0104(97)00195-X ↗
25. Temperature dependent broadband dielectric spectroscopy on poly(p-phenylenevinylene) light-emitting diodes10.1063/1.367321 ↗
26. Skotheim · 1986
27. Low voltage organic light emitting diodes featuring doped phthalocyanine as hole transport material10.1063/1.121982 ↗
28. Controlled n-type doping of a molecular organic semiconductor: naphthalenetetracarboxylic dianhydride (NTCDA) doped with bis(ethylenedithio)-tetrathiafulvalene (BEDT-TTF)10.1063/1.373413 ↗
29. N. Karl, Getting beyond impurity-limited transport in organic photoconductors, in: K. Sumino (Ed.), Defect Control in Semiconductors, Elsevier, Amsterdam, 1990, p. 172510.1016/B978-0-444-88429-9.50119-1 ↗
30. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
31. Energy level offset at organic semiconductor heterojunctions10.1063/1.367027 ↗
32. Field-dependent thermal injection into a disordered molecular insulator10.1016/0009-2614(96)00359-4 ↗
33. Current injection from a metal to a disordered hopping system. I Monte-Carlo simulation10.1103/PhysRevB.59.7507 ↗
34. Borsenberger · 1993
35. Lampert · 1970
36. Kao · 1981
37. Efficiency of charge recombination in organic light emitting diodes10.1016/0301-0104(95)00184-P ↗
38. Langevin-type charge carrier recombination in a disordered hopping system10.1002/pssb.2221910218 ↗
39. Very high-efficiency green organic light-emitting devices based on electrophosphorescence10.1063/1.124258 ↗
40. T. Tsutsui, M.J. Yang, M. Yahiro, K. Nakamura, T. Watanabe, T. Tsuji, Y. Fukuda, T. Wakimoto, S. Miyaguchi, High quantum efficiency in organic light-emitting devices with iridium-complex as a triplet emissive center, Jpn. J. Appl. Phys. 38 (1999) L150210.1143/JJAP.38.L1502 ↗
41. Sze · 1981
42. Charge injection into light-emitting diodes: Theory and experiment10.1063/1.368146 ↗
43. Mott · 1940
44. Pope · 1999
45. Trap-free space-charge limited current: Analytical solution for an arbitrary mobility law10.1080/09500839408240995 ↗
46. Theory of space-charge limited current enhanced by frenkel effect10.1088/0022-3727/3/2/308 ↗
47. Time-resolved space-charge limited injection in a trap-free glassy polymer10.1016/0301-0104(93)85041-6 ↗
48. Device physics of polymer light-emitting diodes10.1002/(SICI)1099-1581(199807)9:7<390::AID-PAT795>3.0.CO;2-9 ↗
49. Injection, transport and recombination of charge carriers in organic light-emitting diodes10.1002/(SICI)1099-1581(199807)9:7<402::AID-PAT796>3.0.CO;2-6 ↗
50. Bipolar charge and current distributions in organic light-emitting diodes10.1063/1.365923 ↗
51. Device model investigation of single layer organic light emitting diodes10.1063/1.368144 ↗
52. Physical mechanisms in double-carrier trap-charge limited transport processes in organic electroluminescent devices: a numerical study10.1063/1.367942 ↗
53. A quantitative numerical model of multilayer vapor-deposited organic light-emitting diodes10.1063/1.371306 ↗
54. Electron and hole mobility in tris(8-hydroxyquinolinolato-n1-o8) aluminium10.1063/1.113806 ↗
55. Charge carrier mobilities in molecular materials for electroluminescent diodes10.1117/12.305425 ↗
56. Anomalous current–voltage characteristics in organic light-emitting devices10.1016/S0379-6779(98)00210-0 ↗
57. Characterization of treated indium–tin-oxide surfaces used in electroluminescent devices10.1063/1.370948 ↗
58. Dependence of indium–tin-oxide work function on surface cleaning method as studied by ultraviolet and X-ray photoemission spectroscopies10.1063/1.371859 ↗
59. Importance of indium–tin-oxide surface acidobasicity for charge injection into organic materials based light emitting diodes10.1063/1.373482 ↗
60. Kelvin probe investigations of metal work functions and correlation to device performance of organic light-emitting device10.1016/S0379-6779(99)00450-6 ↗
61. Efficient energy transfer from blue to red in tetraphenylporphyrin poly(9,9-dioctylfluorene) light-emitting diodes10.1002/(SICI)1521-4095(200001)12:1<58::AID-ADMA58>3.0.CO;2-E ↗
62. An improved experimental determination of external photoluminescence quantum efficiency10.1002/adma.19970090308 ↗
63. Device degradation of polymer light emitting diodes studied by electroabsorption measurements10.1063/1.124944 ↗
64. A.J. Campbell, D.D.C. Bradley, J. Laubender, M. Sokolowski, Thermally activated injection limited conduction in single layer N,N′-diphenyl-N,N′-bis (3-methylphenyl)-1,1′-biphenyl-4,4′-diamine light emitting diodes, J. Appl. Phys. 86 (1999) 500410.1063/1.371471 ↗
65. P.H. Nguyen, S. Scheinert, S. Berleb, W. Brütting, G. Paasch, The influence of deep traps on transient current–voltage characteristics of organic light-emitting diodes, Org. Electron., submitted10.1016/S1566-1199(01)00017-9 ↗
66. Transient studies of deep traps in electroluminescent polymers10.1117/12.372727 ↗
67. Polymer diodes with high rectification10.1063/1.125387 ↗
68. Electronic and chemical structure of conjugated polymer surfaces and interfaces: applications in polymer-based light-emitting devices10.1016/S0379-6779(98)80076-3 ↗
69. Work function of ITO transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
70. Polymer-based light-emitting devices: investigations on the role of the indium–tin oxide (ITO) electrode10.1016/S0379-6779(98)00069-1 ↗
71. Photovoltaic measurement of the built-in potential in organic light emitting diodes and photodiodes10.1063/1.368227 ↗
72. Transient photocurrents across organic–organic interfaces10.1063/1.120919 ↗
73. T. Tsutsui, Molecular design for organic light emitting diodes, Speaker's notes, Proc. ICEL-2 Sheffield, 1999 unpublished
74. Electron drift mobility and electroluminescencet efficiency of tris(8-hydroxyquinolinolato) aluminium10.1063/1.125521 ↗
75. Comparison of mobility and hole current activation energy in the space charge trap-limited regime in a starburst amine10.1063/1.124327 ↗
76. Electrode versus space-charge-limited conduction in organic light-emitting diodes10.1063/1.124907 ↗
77. 1997
78. Alq3: Ab initio calculations of its structural and electronic properties in neutral and charged states10.1016/S0009-2614(98)00829-X ↗
79. Correlation between molecular packing and optical properties in different crystalline polymorphs and amorphous thin films of mer-tris(8-hydroxyquinoline)aluminium(III)10.1021/ja993608k ↗
80. Current injection from a metal to a disordered hopping system. III. Comparison between experiment and Monte Carlo simulation10.1103/PhysRevB.60.8791 ↗
81. P.E. Burrows, Z. Shen, V. Bulovic, D.M. McCarty, S.R. Forrest, J.A. Cronin, M.E. Thompson, Relationship between electroluminescence and current transport in organic heterojunction LEDs, J. Appl. Phys. 79 (1996) 799110.1063/1.362350 ↗
82. Space-charge-limited electron currents in 8-hydroxyquinoline aluminium10.1063/1.125674 ↗
83. Temperature dependent device characteristics of organic light emitting devices10.1016/S0379-6779(99)00361-6 ↗
84. Time-of-flight measurement of hole mobility in aluminium (III) complexes10.1143/JJAP.38.L1252 ↗
85. Current–voltage characteristic of organic light emitting diodes10.1063/1.121533 ↗
86. Current injection from a metal to a disordered hopping system. II. Comparison between analytic theory and simulation10.1103/PhysRevB.59.7514 ↗
87. Schottky energy barriers and charge injection in metal/Alq/metal structures10.1063/1.123145 ↗
88. Bulk limited conduction in electroluminescent polymer devices10.1063/1.369001 ↗
89. Drift mobilities in amorphous charge-transfer complexes of trinitrofluorenone and poly-n-vinylcarbazole10.1063/1.1661065 ↗
90. H. Böttger, V.V. Bryksin, Hopping Conduction in Solids, VCH, Weinheim (Germany), 198510.1515/9783112618189 ↗
91. W. Brütting, S. Berleb, A.G. Mückl, Space-charge limited conduction with a field and temperature dependent mobility in Alq light-emitting devices, Synth. Met. 122 (2001) 9910.1016/S0379-6779(00)01342-4 ↗
92. S. Karg, J. Steiger, H. von Seggern, Determination of trap energies in Alq3 and TPD, Synth. Met. 111–112 (2000) 27710.1016/S0379-6779(99)00445-2 ↗
93. Trap states of tris-8-(hydroxyquinoline) aluminum and naphthyl-substituted benzidine derivative using thermally stimulated luminescence10.1063/1.122173 ↗
94. Silinsh · 1980
95. Efficient screening of electron transport material in multi-layer organic light emitting diodes by combinatorial methods10.1039/a809256g ↗
96. Progress in electroluminescent devices using molecular thin films10.1557/S0883769400033613 ↗
97. Angular dependence of the emission from a conjugated LED: implications for efficiency calculations10.1002/adma.19940060612 ↗
98. Hole transport in solid solutions of a diamine in polycarbonate10.1021/j150664a053 ↗
99. Measurement of electron/hole mobility in organic/polymeric thin films using modified time-of-flight apparatus10.1016/S0379-6779(97)04005-8 ↗
100. Hole injection and transport in tris-(8-hydroxyquinolinato) aluminium10.1063/1.118811 ↗