journal article·2026-05-01Open access

Double-sided structure collimation film (DSSCF) for direct-lit backlight in high-contrast liquid crystal displays and 3D printing

Zi-Jain Zhang, Ding-Zheng Lin

Optical Materials Express· Volume 16· Issue 5

Abstract

This paper presents a novel optical structure designed to enhance the collimation and uniformity of 405 nm LED direct-lit backlight modules. The proposed structure, called the Double-Sided Structure Collimation Film (DSSCF), incorporates a lenticular lens array (LLA), trapezoidal microstructures with apertures, and a highly reflective coating. The lenticular lens array, featuring trapezoidal microstructures and apertures, efficiently converts the diffusive incident light into collimated light. The reflective coating recycles light that does not pass through the slit apertures, improving energy efficiency. We have successfully developed a direct-lit backlight module that achieves optimized collimation, with the full width at half maximum (FWHM) of the first peak intensity in the range of 5° to 10°, and excellent uniformity (> 81%). The module demonstrates a gain of 3.5, about 1.5 (= 3.5/2.3) times higher than the previously reported single-sided structure collimation film (SSSCF). Simulation and experimental results are in close agreement, confirming the robustness of the approach and its potential for scalability in large area collimated backlight module designs. These films may find applications in 3D printing, precision measurement systems, and high-contrast LCDs in the near future.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Liquid Crystal Research Advancements · Advanced Optical Imaging Technologies · Advanced optical system design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Taiwan University of Science and Technology

Funding

National Science and Technology Council

References (20)

Show source-provided references
1. Shan · Addit. Manuf. · 2022 · 52 · 10265310.1016/j.addma.2022.102653 ↗
2. Emir · Eur. Polym. J. · 2022 · 180 · 11159210.1016/j.eurpolymj.2022.111592 ↗
3. Caplins · Addit. Manuf. · 2023 · 62 · 10338110.1016/j.addma.2022.103381 ↗
4. Lin · Opt. Express · 2022 · 30 · 1475910.1364/OE.454018 ↗
5. Chekkaramkodi · Addit. Manuf. · 2024 · 86 · 10418910.1016/j.addma.2024.104189 ↗
6. Lin · Addit. Manuf. · 2023 · 73 · 10366510.1016/j.addma.2023.103665 ↗
7. Paral · ACS Appl. Polym. Mater. · 2025 · 7 · 589810.1021/acsapm.5c00167 ↗
8. Paral · Small · 2025 · 21 · 250204610.1002/smll.202502046 ↗
9. Paral · Virtual and Physical Prototyping · 2025 · 20 · e247092010.1080/17452759.2025.2470920 ↗
10. Kim · J. Phys. D: Appl. Phys. · 2010 · 43 · 14550210.1088/0022-3727/43/14/145502 ↗
11. Lee · Opt. Express · 2021 · 29 · 288410.1364/OE.415302 ↗
12. Teng · Opt. Express · 2013 · 21 · 2144410.1364/OE.21.021444 ↗
13. Huang · Appl. Opt. · 2016 · 55 · 730710.1364/AO.55.007307 ↗
14. Anggorosesar · Multimed Tools Appl. · 2014 · 72 · 111510.1007/s11042-013-1425-9 ↗
15. Langendijk · J. Soc. Inf. Display · 2008 · 16 · 123710.1889/JSID16.12.1237 ↗
16. Zhang · Opt. Express · 2024 · 32 · 3043610.1364/OE.533768 ↗
17. Huang · Opt. Laser Technol. · 2017 · 97 · 25410.1016/j.optlastec.2017.07.013 ↗
18. Teng · J. Display Technol. · 2015 · 11 · 38610.1109/JDT.2015.2403876 ↗
19. Ishikawa · SID’s Digest of Technical Papers lay Technology · 2006 · 37 · 51410.1889/1.2433549 ↗
20. Pan · J. Display Technol. · 2013 · 9 · 96510.1109/JDT.2013.2276744 ↗