Pr3+ doped (Lu0.75Y0.25)3Al5O12 scintillation transparent ceramics derived from nanocrystalline powders
Source abstract
Abstract
In this study, 0.2at.% Pr:(Lu0.75Y0.25)3Al5O12 transparent scintillation ceramics with optical grade and potential of scintillation applications were successfully fabricated via a wet-chemical co-precipitation method combined with pressureless sintering in hydrogen. Doping with (Lu+Y) exceeding 1% of the stoichiometric ratio results in enhanced lattice disorder, grain refinement and the improved in-line transmittance. The XEL spectrum indicated that the luminescence intensity was twice than that of the matrix counterpart. The addition of Mg2+ further improved the optical quality of as fabricated scintillation ceramics, achieving a linear transmittance up to 84.1%, while the luminous intensity increased by 1.5 times. The optimized sample exhibited a fast decay time of 22.2 ns, demonstrating its great application potential for time-of-flight positron emission tomography.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiation Detection and Scintillator Technologies · Luminescence Properties of Advanced Materials · Muon and positron interactions and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Comparison of LuYAP, LSO, and BGO as scintillators for high resolution PET detectors10.1109/TNS.2003.817952 ↗
2. Cerium-doped lutetium oxyorthosilicate: a fast, efficient new scintillator10.1109/23.159655 ↗
3. Fabrication and optical properties of high-performance polycrystalline Nd:YAG ceramics for solid-state lasers10.1111/j.1151-2916.1995.tb08433.x ↗
4. Ceramic laser materials10.1038/nphoton.2008.243 ↗
5. Scintillation properties of LuAG:Ce, YAG:Ce and LYSO:Ce crystals for gamma-ray detection10.1109/TNS.2009.2033994 ↗
6. The antisite LuAl defect-related trap in Lu3Al5O12:Ce single crystal
7. Polycrystalline Ho: LuAG laser ceramics: fabrication, microstructure, and optical characterization10.1111/jace.14771 ↗
8. Effect of Ca content on optical, scintillation and thermoluminescence performance of LuAG:Ce ceramic scintillators10.1016/j.jlumin.2025.121245 ↗
9. A comprehensive & systematic study of coincidence time resolution and light yield using scintillators of different size and wrapping10.1109/TNS.2013.2270089 ↗
10. Crystal growth and optical properties of Ce-doped (Y, Lu)AlO3 single crystal
11. Ce3+, Pr3+ Co-Doped Lu3Al5O12 single crystals and ceramics: a comparative Study
12. Drozdowski · 33000 photons per MeV from mixed (Lu0.75Y0.25)3Al5O12:Pr scintillator crystals · 2014 · 4 · 1207
13. The influences of stoichiometry on the sintering behavior, optical and scintillation properties of Pr:LuAG ceramics10.1016/j.jeurceramsoc.2018.05.014 ↗
14. Effect of Mg2+ co‐doping on the scintillation performance of LuAG:Ce ceramics10.1002/pssr.201308199 ↗
15. Effect of agglomeration state of starting powder on fabrication of Tm,Ho co-doped LuAG transparent ceramics10.1016/j.optmat.2020.109883 ↗
16. Porosity and pore size dependence of the real in-line transmission of YAG and alumina ceramics10.1016/j.jeurceramsoc.2013.12.053 ↗
17. Luminescence and scintillation properties of advanced Lu3Al5O12:Pr3+ single crystal scintillators10.1016/j.radmeas.2013.11.009 ↗
18. Fabrication, optical and scintillation properties of (Lu0.75 ,Y0.25 )AG:Pr ceramic scintillators10.1016/j.optmat.2017.04.043 ↗
19. Fabrication and scintillation performance of nonstoichiometric LuAG:Ce ceramics10.1111/jace.13305 ↗
20. Effect of MgO content on the microstructure and properties of zirconia-toughened alumina (ZTA) ceramics by hot pressure sintering10.1007/s11665-024-10293-0 ↗
21. Influence of non-stoichiometry on solid-state reactive sintering of YAG transparent ceramics10.1016/j.jeurceramsoc.2015.04.038 ↗
22. Fabrication and scintillation properties of Pr:Lu3Al5O12 transparent ceramics from co-precipitated nanopowders10.1016/j.jallcom.2019.152885 ↗
23. Scintillation properties and effect of thermal annealing in Lu3Al5O12:Ce and Lu3Al5O12:Pr ceramics10.1016/j.optmat.2018.08.061 ↗
24. Observation of “fast” and “slow” decay processes in oxygen-doped hydrogenated amorphous silicon nitride thin films10.1364/OME.5.000022 ↗
25. Highly efficient Cs-based perovskite light-emitting diodes enabled by energy funnelling10.1039/C7CC06615E ↗
26. Effects of sintering temperature on the microstructure and luminescence of LuAG:Pr ceramics10.1016/j.radmeas.2019.01.005 ↗
27. Growth and scintillation properties of Pr-doped Lu3Al5O12 crystals10.1016/j.jcrysgro.2005.11.023 ↗
28. The role of air annealing on the optical and scintillation properties of Mg co-doped Pr:LuAG transparent ceramics10.1016/j.optmat.2017.05.054 ↗