Hot-pressed Cr2+-doped ZnS transparent ceramics from combustion-synthesized nanoparticles: Processing and luminescence properties
Source abstract
Abstract
Transparent Cr 2+ -doped ZnS ceramics with a nominal Cr concentration ranging from 50 to 3000 ppm were fabricated by hot pressing. ZnS nanopowders with controlled Cr content were synthesized by a combustion method and treated in H 2 S/N 2 to remove oxide impurities. X-ray diffraction showed that both powders and ceramics were predominantly cubic ZnS with minor hexagonal ZnS; impurity phases (ZnO, Zn 3 O(SO 4 ) 2 ) present after combustion were eliminated. Powders consisted of ∼100 nm primary particles, and doping had little effect on morphology. Ceramics achieved >99.5% theoretical density with ∼0.7 μm grain size, regardless of Cr content. Undoped ceramics exhibited mid-infrared transmission near the theoretical limit (∼75%); increasing Cr content reduced transmission (though still being high up to 1000 ppm) and introduced visible absorption attributed to Cr 3+ in a ZnCr 2 S 4 spinel phase. Optical spectra revealed broad Cr 2+ ( T d ) related absorption (1.3-2.1 μm, peaking at ∼1.7 μm) and broad luminescence (1.6-3.0 μm, peak at ∼1.91 μm). A luminescence lifetime of ∼6 μs was measured for all samples indicating that concentration quenching effects are limited in the investigated range. These results demonstrate that Cr 2+ :ZnS ceramics have promising mid-IR emission properties suitable for 2–3 μm solid-state lasers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Solid State Laser Technologies · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Progress in Cr2+ and Fe2+ doped mid-IR laser materials10.1002/lpor.200810076 ↗
2. Directly diode-pumped femtosecond Cr:ZnS amplifier with ultra-low intensity noise10.1364/OL.475438 ↗
3. Saturable absorption of Cr2+:ZnS doped by hot isostatic pressing at 1.54 μm, 2018
4. Subnanosecond Tm:KLuW microchip laser Q-switched by a Cr:ZnS saturable absorber10.1364/OL.40.005220 ↗
5. Mid-IR microchip laser: ZnS:Cr2+ laser with saturable absorber material
6. Vapor growth and characterization of Cr-doped ZnSe crystals10.1016/S0022-0248(99)00358-9 ↗
7. Vapour growth of II‐VI single crystals doped by transition metals for mid‐infrared lasers10.1002/pssc.200564723 ↗
8. Optical properties of mid-infrared Cr:ZnSe single crystals grown by chemical vapor transporting with NH4Cl10.1364/OME.416315 ↗
9. Cr:ZnSe laser crystal grown by Bridgeman technique: characteristics and laser performance
10. Reparative effect of diffusion process on host defects in Cr2+ doped ZnS/ZnSe10.1016/j.jallcom.2014.01.162 ↗
11. Hot isostatic pressing of transition metal ions into chalcogenide laser host crystals10.1364/OME.6.003339 ↗
12. CVD-grown Fe2+:ZnSe polycrystals for laser applications10.1088/1612-202X/aa66fb ↗
13. Effects of the processing technology of CVD-ZnSe, Cr2+:ZnSe, and Fe2+:ZnSe polycrystalline optical elements on the damage threshold induced by a repetitively pulsed laser at 2.1 μm10.3390/ceramics5030035 ↗
14. Hot-pressed ceramic Cr2+:ZnSe gain-switched laser10.1364/OE.14.011694 ↗
15. Growth of high optical quality zinc chalcogenides single crystals doped by Fe and Cr by the solid phase recrystallization technique at barothermal treatment10.1016/j.jcrysgro.2016.11.009 ↗
16. KEYNOTE: development of hot-pressed and chemical-vapor-deposited zinc sulfide and zinc selenide in the United States for optical windows
17. Transparent ZnS ceramics by sintering of high purity monodisperse nanopowders10.1111/jace.12570 ↗
18. A review of Cr2+ or Fe2+ ion-doped zinc sulfide and zinc selenide ceramics as IR laser active media10.3390/ceramics6030094 ↗
19. Room-temperature lasing on Fe2+ :ZnSe with meniscus inner doped layer fabricated by solid-state diffusion bonding10.1088/1612-202X/ab09e8 ↗
20. Enhancement of Cr and Fe diffusion in ZnSe/S laser crystals via annealing in vapors of Zn and hot isostatic pressing
21. Experimental study of thermal lens features in laser ceramics10.1364/OE.16.021012 ↗
22. New insights in structural characterization of transparent ZnS ceramics hot-pressed from nanocrystalline powders synthesized by combustion method10.1016/j.jeurceramsoc.2019.03.033 ↗
23. Hot-pressed Fe2+:ZnSe transparent ceramics with different doping concentrations10.1016/j.ceramint.2021.10.125 ↗
24. Hot-pressed chromium doped zinc sulfide infrared transparent ceramics10.1016/j.scriptamat.2016.07.027 ↗
25. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
26. WinPLOTR: a windows tool for powder diffraction pattern analysis
27. Über die Elektronendichteverteilung in der Zinkblende, Z. Für Elektrochem. Berichte Bunsenges
28. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
29. Progress in Mid-IR lasers based on Cr and Fe-Doped II–VI chalcogenides10.1109/JSTQE.2014.2346512 ↗