journal article·2026-07Open access

Heterogeneous InP-on-insulator wafer via surface activated room-temperature quasi-direct bonding

Gufei Zhang, Kaname Watanabe, Kenji Uno, Yoshiki Katoda, Ryo Takigawa

Optical Materials· Volume 175

Abstract

In this study, we investigated the room-temperature wafer bonding of indium phosphide (InP) and thermally oxidized Si (SiO 2 ). The bond strength of InP/SiO 2 wafers via surface-activated direct bonding and room-temperature quasi-direct bonding using an activated Si atomic layer were compared, and the bonding using an activated Si atomic layer resulted in a tenfold increase in bond strength. The surface morphology and atomic structure of the bonding interface were characterized to confirm that the bond strength was enhanced because the InP surface with an activated atomic Si layer maintained low roughness, and a strong direct bond between the activated Si atoms was obtained simultaneously. Subsequently, the state of In and P diffusion at the bonding interface was verified. The observation of the debonded surfaces showed that although In and P diffuses into the activated Si atom layer, the amount is negligible, and the bonding interface consists almost entirely of strong Si-Si bonds. Using this room temperature quasi-direct bonding method, the heterogenous InP-on-insulator wafer bonded at room temperature is suitable for fabricating optical and electronics devices and could be integrated with other exciting material platforms. • The fabrication of heterogeneous InP-on-insulator (InPOI) wafers was demonstrated using a surface-activated, room-temperature quasi-direct wafer bonding method. • The tensile strength of the bonded InPOI wafers at room temperature exceeded 29 MPa, indicating that the InP/SiO 2 bonding interface achieves sufficient bond strength. • Void-free atomic contact formation at the InP/SiO 2 bonding interface was confirmed. • Detailed investigations of the bonding interface and debonded surfaces clarified the formation of a strong InP/SiO 2 bonding interface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photonic and Optical Devices · 3D IC and TSV technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Hybrid indium phosphide-on-silicon nanolaser diode10.1038/nphoton.2017.56 ↗
2. Heterogeneous CMOS Photonics Based on SiGe/Ge and III–V Semiconductors Integrated on Si Platform10.1109/JSTQE.2017.2660884 ↗
3. Electrical pumping fabry-perot lasing of a III-V layer on a highly doped silicon micro rib10.1088/1612-2011/11/11/115807 ↗
4. Directly modulated membrane lasers with 108 GHz bandwidth on a high-thermal-conductivity silicon carbide substrate10.1038/s41566-020-00700-y ↗
5. Compact optical comb generator using InP tunable laser and push-pull modulator10.1109/LPT.2014.2365259 ↗
6. InP Mach–Zehnder modulator platform for 10/40/100/200-Gb/s operation10.1109/JSTQE.2013.2270280 ↗
7. Temperature characteristics of 1.3-μm membrane lasers on InP-on-Insulator substrate
8. Room-Temperature Bonding of Vertical-Cavity Surface-Emitting Laser Chips on Si Substrates Using Au Microbumps in Ambient Air10.1143/APEX.1.112201 ↗
9. A monolithic InP/SOI platform for integrated photonics10.1038/s41377-021-00636-0 ↗
10. Epitaxial growth of InP to bury directly bonded thin active layer on SiO2/Si substrate for fabricating distributed feedback lasers on silicon10.1049/iet-opt.2014.0138 ↗
11. Epitaxial growth of InP nanowires on germanium10.1038/nmat1235 ↗
12. Epitaxial growth of high quality InP on Si substrates: the role of InAs/InP quantum dots as effective dislocation filters10.1063/1.5029255 ↗
13. Epitaxial growth of InP on Si by OMVPE — defect reduction in epitaxial InP using InAsxP1−xInP superlattices10.1016/0022-0248(88)90578-7 ↗
14. Plasma-assisted InP-to-Si low temperature wafer bonding10.1109/2944.991407 ↗
15. Current-injected light emission of epitaxially grown InAs/InP quantum dots on directly bonded InP/Si substrate10.7567/JJAP.54.030208 ↗
16. Low temperature InP/Si wafer bonding10.1063/1.1644615 ↗
17. Self-assembled monolayer assisted bonding of Si and InP10.1364/OME.2.001141 ↗
18. Low-temperature direct bonding of InP and diamond substrates under atmospheric conditions10.1038/s41598-021-90634-4 ↗
19. Surface activated bonding of aluminum oxide films at room temperature10.1016/j.scriptamat.2020.09.005 ↗
20. Direct bonding of LiNbO3 and SiC wafers at room temperature10.1016/j.scriptamat.2019.08.027 ↗
21. GaN-SiC and GaN-diamond integration via room temperature bonding
22. Interlayer investigations of GaN heterostructures integrated into silicon substrates by surface activated bonding10.3390/cryst13020217 ↗
23. 1.3 μm InGaAsP/InP lasers on GaAs substrate fabricated by the surface activated wafer bonding method at room temperature10.1063/1.121116 ↗
24. Characterization of the bonding strength and interface current of p-Si/n-InP wafers bonded by surface activated bonding method at room temperature10.1063/1.1430883 ↗
25. Room-temperature bonding of lithium niobate and silicon wafers by argon-beam surface activation10.1063/1.123860 ↗
26. Room temperature GaAs-Si and InP-Si wafer direct bonding by the surface activated bonding method10.1016/S0168-583X(96)00546-0 ↗
27. High-quality InP/SOI heterogeneous material integration by room temperature surface-activated bonding for hybrid photonic devices10.35848/1347-4065/ab8434 ↗
28. Sens. Low-temperature direct bonding of silicon and silicon dioxide by the surface activation method10.1016/S0924-4247(98)00128-9 ↗
29. Residual stress in lithium niobate film layer of LNOI/Si hybrid wafer fabricated using low-temperature bonding method10.3390/mi10020136 ↗
30. Wafer level surface activated bonding tool for MEMS packaging10.1149/1.1758723 ↗
31. Room temperature bonding of diamond/Si with Mo/Au interlayers in atmospheric air10.1016/j.diamond.2023.109844 ↗
32. Room-temperature bonding of organic films using ultrathin Au intermediate layers for organic integrated optical devices
33. Silicon carbide wafer bonding by modified surface activated bonding method10.7567/JJAP.54.030214 ↗
34. Demonstration of GaN/LiNbO3 hybrid wafer using room-temperature surface activated bonding10.1149/2162-8777/ab8369 ↗
35. Ultrathin adhesive layer between LiNbO3 and SiO2 for bonded LNOI waveguide applications10.7567/1347-4065/ab24b6 ↗
36. Room temperature bonding of SiO2 and SiO2 by surface activated bonding method using Si ultrathin films10.7567/JJAP.55.026503 ↗
37. Room temperature SiC-SiO2 wafer bonding enhanced by using an intermediate Si nano layer10.1149/2.0081705jss ↗
38. Room-temperature wafer bonding of SiC-Si by modified surface activated bonding with sputtered Si nanolayer10.7567/JJAP.55.04EC09 ↗
39. Fabrication of a bonded LNOI waveguide structure on Si substrate using ultra-precision cutting10.7567/1347-4065/ab514e ↗
40. Bonding performance in atomic diffusion bonding of wafers using amorphous Si thin films with smooth surface10.35848/1347-4065/ac5871 ↗
41. Fabrication of heterogeneous LNOI photonics wafers through room temperature wafer bonding using activated Si atomic layer of LiNbO3, glass, and sapphire10.1016/j.apsusc.2023.156666 ↗
42. Thin-film lithium niobate-on-insulator waveguides fabricated on silicon wafer by room-temperature bonding method with silicon nanoadhesive layer10.1364/OE.26.024413 ↗
43. Bonding of LiNbO3 and Si wafers at room temperature using Si nanolayers10.35848/1347-4065/abf2d3 ↗
44. Effect of surface roughness on room-temperature wafer bonding by Ar beam surface activation10.1143/JJAP.37.4197 ↗
45. Bonding of silicon wafers for silicon‐on‐insulator10.1063/1.342443 ↗
46. Enhanced bonding strength of InP/Si chip-on-wafer by plasma-activated bonding using stress-controlled interlayer10.7567/1347-4065/ab4b11 ↗
47. Quantification of wafer bond strength under controlled atmospheres,”10.35848/1347-4065/ac5e49 ↗
48. Measurement of bonding energy in an anhydrous nitrogen atmosphere and its application to silicon direct bonding technology10.1063/1.4716030 ↗