Composition-dependent femtosecond laser damage and incubation effects in Pb2P2O7–Nb2O5 phosphate glasses
Source abstract
Abstract
Femtosecond laser micromachining was investigated in a series of phosphate glasses with systematically varied Nb 2 O 5 concentration, aiming to correlate their linear optical properties with single-pulse and multi-pulse damage behavior. UV–Vis absorption spectroscopy revealed a progressive reduction in optical bandgap energy with increasing niobium oxide content, consistent with the formation of a more polarizable glass network. The bandgap values show excellent agreement with those previously reported for glasses of identical compositions, confirming the reliability of the structural–optical trends. Single-pulse and multi-pulse ablation thresholds were determined for all samples, demonstrating a monotonic decrease in damage fluence as Nb 2 O 5 concentration increases. Incubation was observed in all glasses, with a systematic reduction of threshold fluence as the number of pulses increased, revealing a clear composition-dependent sensitivity to cumulative laser exposure. The incubation coefficients extracted from the fluence-versus-pulse-number analysis confirmed that samples with lower bandgap energies exhibit more pronounced multi-pulse modification behavior. To provide additional insight into the underlying ionization regime, the Keldysh parameter was calculated for each composition using measured bandgap energies and refractive index values obtained from the literature. All glasses exhibited γ < 1 under the experimental conditions, indicating a predominantly tunnelling ionization regime for the onset of damage. Together, these results establish a direct link between the optical properties of niobium phosphate glasses and their response to ultrafast laser irradiation, offering a consistent framework for predicting micromachining performance across this glass family. • Optical bandgap decreases with increasing Nb 2 O 5 content • Laser damage thresholds correlate directly with glass optical properties • Strong incubation effects observed under multi-pulse femtosecond irradiation • Lower bandgap enhances cumulative laser sensitivity • Damage onset dominated by tunnelling ionization
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Glass properties and applications · Nonlinear Optical Materials Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Gaffo · 2000 · 300
2. Feng · 2004 · 1178
3. Vivas · 2006
4. Nonlinear optical spectrum of diamond at femtosecond regime10.1038/s41598-017-14748-4 ↗
5. Two-photon absorption of ZnS quantum dots: interpreting the nonlinear spectrum10.1021/jp400956k ↗
6. Nonlinear optical properties of tungsten lead-pyrophosphate glasses containing metallic copper nanoparticles10.1007/s11468-013-9585-z ↗
7. Organic optoelectronic materials: mechanisms and applications10.1021/acs.chemrev.6b00127 ↗
8. Highly nonlinear Pb2P2O7-Nb2O5 glasses for optical fiber production10.1016/j.jnoncrysol.2016.04.019 ↗
9. Characterization of the third-order optical nonlinearity spectrum of barium borate glasses10.1016/j.optmat.2017.06.060 ↗
10. Femtosecond laser waveguide micromachining of PMMA films with azoaromatic chromophores10.1364/OE.16.000200 ↗
11. Ultrafast laser pulses for structuring materials at Micro/Nano scale: from waveguides to superhydrophobic surfaces10.3390/photonics4010008 ↗
12. Femtosecond laser processing of glassy and polymeric matrices containing metals and semiconductor nanostructures10.1016/j.optmat.2013.08.001 ↗
13. Femtosecond laser micro/nano processing: from fundamental to applications10.1088/2631-7990/ad943e ↗
14. Laser-assisted micromachining techniques: an overview of principles, processes, and applications
15. Femtosecond laser-based additive manufacturing: current status and perspectives10.3390/qubs6010005 ↗
16. Femtosecond, picosecond and nanosecond laser ablation of solids10.1007/BF01567637 ↗
17. Femtosecond lasers: the ultimate tool for high-precision 3D manufacturing10.1515/aot-2019-0012 ↗
18. Femtosecond laser fabrication of monolithically integrated microfluidic sensors in glass10.3390/s141019402 ↗
19. Photonic circuits written by femtosecond laser in glass: improved fabrication and recent progress in photonic devices10.1117/1.AP.3.2.024002 ↗
20. Three-dimensional microfabrication of materials by femtosecond lasers for photonics applications10.1063/1.3216462 ↗
21. Femtosecond laser micromachining for integrated quantum photonics10.1515/nanoph-2021-0419 ↗
22. Laser machining fundamentals: micro, nano, atomic and close-to-atomic scales10.1088/2631-7990/acb134 ↗
23. Influence of laser parameters and material properties on micro drilling with femtosecond laser pulses10.1007/s003390051418 ↗
24. Incubation effect during laser micromachining of GaN films with femtosecond pulses10.1007/s10854-019-01373-2 ↗
25. The route to microstructures with optical quality glass surfaces by fs laser ablation10.1038/s41598-025-11563-0 ↗
26. Rapid fabrication of smooth micro-optical components on glass by etching-assisted femtosecond laser modification
27. Femtosecond pulsed laser micromachining of glass substrates with application to microfluidic devices10.1364/AO.43.004584 ↗
28. Femtosecond laser micromachining in transparent materials10.1038/nphoton.2008.47 ↗
29. Phosphate and fluoride phosphate optical glasses - properties, structure and applications
30. Highly doped phosphate glass fibers for compact lasers and amplifiers: a review
31. A comprehensive investigation of Bi2O3 on the physical, structural, optical, and electrical properties of K2O.ZnO.V2O5.B2O3 glasses
32. Thermal and optical properties of La_2O_3-Nb_2O_5 high refractive index glasses10.1364/OME.4.000710 ↗
33. Structure of Nb2O5-NaPO3 glasses by X-ray and neutron diffraction10.1039/C2CP42772A ↗
34. Glass-forming region, electrical and structural properties of BiPO4-NbOPO4-P2O5 (Bi2O3-Nb2O5-P2O5) glasses
35. Alkaline Earth metal fluorides (MgF2, CaF2, SrF2, BaF2) and Nb2O5Effect on the structural and optical properties of new fluorophosphoniobate glasses10.1021/acsomega.5c05892 ↗
36. Structural role of Nb2O5in phosphate glasses: an advanced solid-state NMR protocol for the glass system xNb2O5–(100–x)NaPO310.1021/jacs.5c09793 ↗
37. Thermal, structural and optical properties of new tungsten lead-pyrophosphate glasses
38. Brow · 2000 · 264
39. Structure and nonlinear optical properties of sodium-niobium phosphate glasses10.1016/j.jnoncrysol.2008.03.017 ↗
40. Femtosecond laser‐induced refractive index patterning in Inorganic/Organic hybrid films10.1002/adpr.202100257 ↗
41. Dependence of the femtosecond laser refractive index change thresholds on the chemical composition of doped-silica glasses10.1364/OME.1.000711 ↗
42. Nonlinear optical properties and femtosecond laser micromachining of special glasses
43. Fabrication of micro patterns on BaTiO3:Er3+/Yb3+ perovskite films by femtosecond laser micromachining10.1016/j.apsusc.2023.157658 ↗
44. Femtosecond laser induced damage threshold incubation and oxidation in AS2S3 and AS2Se3 thin films10.1016/j.apsusc.2024.159449 ↗
45. Femtosecond laser micromachining of polylactic acid/graphene composites for designing interdigitated microelectrodes for sensor applications10.1016/j.optlastec.2017.11.006 ↗
46. Simple technique for measurements of pulsed Gaussian-beam spot sizes10.1364/OL.7.000196 ↗
47. Morphology studies on craters created by femtosecond laser irradiation in UDMA polymer targets embedded with plasmonic gold nanorods
48. Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics10.1063/1.1447555 ↗
49. Influence of the repetition rate and pulse duration on the incubation effect in multiple-shots ultrafast laser ablation of steel10.1016/j.phpro.2013.03.136 ↗
50. Evidence for increased incubation parameter in multi-pulse ablation of a Pt:SS alloy using a femtosecond laser at high repetition rates10.1016/j.apsusc.2013.12.034 ↗
51. Spot-size dependence of the ablation threshold in dielectrics for femtosecond laser pulses10.1007/s00339-003-2213-6 ↗
52. Femtosecond-laser ablation dynamics of dielectrics: basics and applications for thin films10.1088/0034-4885/76/3/036502 ↗
53. Nb2O5 film optical properties and laser-induced damage by phase-change-driven tuning10.1016/j.ceramint.2024.06.040 ↗
54. Surface damage threshold and structuring of dielectrics using femtosecond laser pulses: the role of incubation10.1016/S0169-4332(99)00228-7 ↗
55. Metal thin film ablation with femtosecond pulsed laser10.1016/j.optlastec.2006.10.001 ↗
56. Femtosecond laser ablation of silicon-modification thresholds and morphology10.1007/s003390100893 ↗
57. Ionization in the field of a strong electromagnetic wave
58. Femtosecond laser micro/nano-processing via multiple pulses incubation
59. Lenzner · 1998
60. Ultrafast lasers—reliable tools for advanced materials processing10.1038/lsa.2014.30 ↗
61. Boyd · 2008
62. Direct femtosecond laser processing for generating High Spatial Frequency LIPSS (HSFL) on borosilicate glasses with large-area coverage10.3390/photonics10070793 ↗
63. Threshold fluence and incubation during multi-pulse ultrafast laser ablation of quartz10.1364/OE.475592 ↗
64. Enhancing waveguide performance in La3+-Doped tellurite glasses: Energy-Induced structural tuning for reduced propagation loss10.1021/acsomega.5c02610 ↗