journal article·2026-06Open access

Reactive sputtering of luminescent YAG:Ce thin films by dual hollow cathode plasma-jet

Petr Písařík, Yuki Maruyama, Yugo Akabe, Kota Hibino, Michal Kohout, Zdeněk Hubička, Kosaku Kato, Makoto Nakajima, Nobuhiko Sarukura, Marilou Cadatal-Raduban, Shingo Ono, Kohei Yamanoi, Jiří Olejníček

Optical Materials· Volume 174

Abstract

Cerium-doped yttrium aluminum garnet (Y 3 Al 5 O 12 :Ce, YAG:Ce) thin films were prepared by reactive co-sputtering from two separate elemental sources (Y 3 Al 5 alloy and pure cerium) using a dual hollow cathode plasma-jet system in an Ar/O 2 atmosphere. This plasma-based approach enabled spatial control of Ce incorporation through the geometric configuration of the sputtering sources and tailored power input. Film composition and structure were analyzed using LIBS, XRD, and optical methods, revealing a gradient in Ce content across the substrate array. Post-deposition annealing at 1000 °C was essential for crystallization and luminescence activation, resulting in the formation of single-phase YAG at low Ce concentrations and a gradual transition toward CeO 2 -rich films at high Ce loading. Photoluminescence and cathodoluminescence studies showed Ce 3+ emission at moderate doping levels, while higher Ce content led to phase segregation, Ce 4+ formation, and luminescence quenching. These results demonstrate that dual hollow cathode reactive sputtering provides a flexible approach for controlling the Ce distribution and for exploring the structural and optical behavior of YAG:Ce films under extreme Ce loading conditions. • Reactive sputtering of YAG:Ce thin films from metallic targets by two hollow cathodes • Ce concentration controlled by nozzle geometry and independent discharge powers • Post-annealed films show YAG:Ce crystallization and Ce 3+ luminescence activation • Demonstrated route for tunable luminescent garnet coatings for optical applications
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Solid State Laser Technologies · Radiation Detection and Scintillator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Properties of the YAG:Ce scintillator10.1016/0168-9002(94)90500-2 ↗
2. Comparative investigation on synthesis and photoluminescence of YAG:Ce phosphor10.1016/j.mseb.2003.09.031 ↗
3. Evaluation of properties of YAG (Ce) ceramic scintillators10.1109/TNS.2005.856757 ↗
4. The influence of CeF3 on radiation hardness and luminescence properties of Gd2O3–B2O3 glass scintillator10.1038/s41598-022-14833-3 ↗
5. Evaluation of properties of YAG (Ce) ceramic scintillators10.1109/TNS.2005.856757 ↗
6. Analysis of Ce3+ luminescence quenching in solid solutions between Y3Al5O12 and Y3Ga5O12 by temperature dependence of photoconductivity measurement10.1063/1.3632069 ↗
7. Pulling growth technique towards rare earth single crystals10.1007/s11431-018-9257-6 ↗
8. Crystal growth and characterization of large Ca0.582Sr0. 418F2 single crystal by Czochralski method using cone die10.1016/j.jcrysgro.2023.127541 ↗
9. Growth and characterization of YAG and LuAG epitaxial films for scintillation applications10.1016/j.jcrysgro.2010.01.023 ↗
10. Scintillation and optical properties of YAG:Ce films grown by liquid phase epitaxy10.1016/j.radmeas.2007.01.047 ↗
11. Preparation of a YAG:Ce phosphor glass by screen-printing technology and its application in LED packaging10.1364/OL.38.002240 ↗
12. Luminescence and compositional analysis of Y3Al5O12:Ce films fabricated by pulsed-laser deposition10.1007/s10019-002-0204-4 ↗
13. Preparation and characterization of YAG:Ce thin phosphor films by pulsed laser deposition10.1111/ijac.12612 ↗
14. Preparation, characterization and photoluminescent studies of Cr and Nd co-doped Ce:YAG compounds10.1016/j.jlumin.2015.01.040 ↗
15. Enhanced absorption and emission of Y3Al5O12:Ce3+ thin layers prepared by epoxide-catalyzed sol-gel method10.1364/OME.2.001111 ↗
16. Fabrication of cerium-doped yttrium aluminum garnet thin films by a mist CVD method10.1016/j.jlumin.2015.10.048 ↗
17. Structural and luminescent properties of YAG:Ce thin film phosphor10.1016/j.jallcom.2010.04.136 ↗
18. Reactive magnetron deposition of YAG:Ce phosphor coatings in the metallic mode10.1016/j.optmat.2024.115946 ↗
19. Deposition of bax Sr1–x TiO3 thin films by double RF hollow cathode plasma jet system10.1002/ctpp.200810083 ↗
20. Hollow cathode gas flow sputtering of nickel oxide thin films for hole-transport layer application in perovskite solar cells10.1002/aesr.202300201 ↗
21. Co3O4 thin films prepared by hollow cathode discharge10.1016/j.surfcoat.2019.03.010 ↗
22. Electrical and optical properties of Al-doped ZnO films deposited by hollow cathode gas flow sputtering10.1016/j.tsf.2008.11.114 ↗
23. Investigation of RF and DC plasma jet system during deposition of highly oriented ZnO thin films10.1016/S0257-8972(03)00581-4 ↗
24. WO3 and WO3-x thin films prepared by DC hollow cathode discharge10.1016/j.vacuum.2021.110679 ↗
25. High rate deposition of photoactive TiO2 films by hot hollow cathode10.1016/j.surfcoat.2019.125256 ↗
26. Deposition of aluminum from an electron beam source10.1116/1.1316601 ↗
27. Chapter 4 - physical sputtering and sputter deposition
28. Phosphor thermometry at 5 kHz rate using a high-speed fiber-optic spectrometer10.1063/1.5120336 ↗
29. YAG:Ce nanoparticle lightsources10.1088/0957-4484/24/16/165703 ↗
30. Unveiling the effect of Ce3+ doping concentration in YAG:Ce single crystals towards high luminance laser lighting10.1016/j.jlumin.2024.120786 ↗
31. Mechanisms of photoluminescence in cerium oxide pellets with different types of defects10.1016/j.jlumin.2023.119859 ↗
32. Nanodefects in YAG:Ce-Based phosphor microcrystals10.3390/cryst9090476 ↗