Pulsed Laser Deposition and Characterization of Heteroepitaxial LiMn₂O₄/La_0.5Sr_0.5CoO₃ Bilayer Thin Films as Model Lithium Ion Battery Cathodes

Epitaxial LiMn 2 O 4 (LMO)/La 0.5 Sr 0.5 CoO 3 (LSCO) bilayer thin films were grown on single crystalline SrTiO 3 (STO) (111) substrates as model lithium ion battery cathodes. The LSCO layer was used as an electrically conducting buffer layer for electrochemical testing. The LMO and LSCO layers were both epitaxial, with sub-nano flat LMO/LSCO interfaces as seen by X-ray diffraction, synchrotron X-ray scattering, and high-resolution transmission electron microscopy (HRTEM), but with a large LMO surface roughness due to the relatively large lattice mismatch with LSCO. Three-dimensional islands and depressions were formed on the strain-relaxed LMO layer, and misfit dislocations at the LMO/LSCO interface were discerned through HRTEM imaging, suggesting a Stranski–Krastanov (SK) mode thin-film growth. A crystalline structural change from cubic spinel at the LMO surface and interior to tetragonal oxygen-deficient LMO at the LMO/LSCO interface was examined. Electrochemical tests along with in situ synchrotron X-ray scattering measurements on the epitaxial LMO/LSCO bilayers showed a significant loss of capacity after the first cycle, which was attributed to an electrical conductivity loss of the LSCO buffer layer due to irreversible lattice oxygen loss.