journal article·2015-12

Fabrication and optical studies of transparent Tm, Ho:YAG ceramics

Agata Sidorowicz, Magdalena Nakielska, Anna Wajler, Helena Węglarz, Katarzyna Jach, Andrzej Olszyna

Optical Materials· Volume 50
Publisher page

Abstract

Abstract The aim of this work has been to obtain transparent Tm, Ho:YAG ceramics (thulium doping range: 2–6 at.%, holmium doping range: 0.1–1.0 at.%) by reaction sintering using commercial powders. It has been proved that the particle size, purity and degree of agglomeration of the powders used are crucial from the point of view of the optical quality of ceramics. The spectroscopic measurements of Tm, Ho:YAG ceramics with different concentration of active ions (including transmission and emission spectra measurements) have been presented and discussed. As has been found, both concentration of holmium and thulium separately as well as the balance between them are of great importance. Energy transfer between Tm and Ho ions has been demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solid State Laser Technologies · Luminescence Properties of Advanced Materials · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Fabrication and optical properties of high-performance polycrystalline Nd:YAG ceramics for solid-state lasers10.1111/j.1151-2916.1995.tb08433.x ↗
2. Transparent polycrystalline ceramic laser materials10.1016/j.optmat.2008.03.003 ↗
3. Ceramic YAG lasers10.1016/j.crhy.2006.08.002 ↗
4. Fabrication of polycrystalline, transparent YAG ceramics by a solid-state reaction method10.1111/j.1151-2916.1995.tb08389.x ↗
5. Neodymium doped yttrium aluminum garnet (Y3Al5O12) nanocrystalline ceramics – a new generation of solid state laser and optical materials10.1016/S0925-8388(02)00083-X ↗
6. Preparation and characterization of Yb-doped YAG ceramics10.1016/j.optmat.2012.05.028 ↗
7. Fabrication and laser properties of transparent Yb:YAG ceramics10.1016/j.optmat.2011.04.017 ↗
8. Fabrication and properties of highly transparent Er:YAG ceramics10.1016/j.optmat.2011.05.014 ↗
9. Fabrication, microstructure and optical properties of polycrystalline Er3+:Y3Al5O12 ceramics10.1016/j.ceramint.2010.08.025 ↗
10. Preparation and characterization of transparent Nd:YAG ceramics10.2478/s11772-008-0060-x ↗
11. Diode-pumped Tm:YAG ceramic laser10.1111/j.1551-2916.2009.03220.x ↗
12. GaSb-based SESAM mode-locked Tm:YAG ceramic laser at 2μm10.1364/OE.23.001361 ↗
13. High-power Cr2+:ZnS saturable absorber passively Q-switched Ho:YAG ceramic laser and its application to pumping of a mid-IR OPO10.1364/OL.40.000348 ↗
14. Laser-diode end-pumped Tm3+:YAG eye-safe laser10.1364/AO.35.001424 ↗
15. Efficient high-power Tm:YAG laser at 2μm, end-pumped by a diode bar10.1016/S0030-4018(98)00311-3 ↗
16. Dual diodes end-pumped Q-switch operation of a c-cut 2044-nm Tm, Ho:YAlO3 laser10.1002/lapl.200910002 ↗
17. Diode-pumped injection-seeded Tm, Ho:GdVO4 laser10.1002/lapl.200810103 ↗
18. Spectroscopic investigation of the visible and mid-infrared emission in Tm- and Ho-doped YAG and YLF crystals10.1007/BF01081692 ↗
19. Fluorescence dynamics in an optically-excited Tm, Ho:YAG crystal10.1016/S0925-3467(97)00004-9 ↗
20. Energy-transfer processes in Y3Al5O12:Tm, Ho10.1103/PhysRevB.46.8018 ↗
21. Fabrication and characterization of transparent Tm, Ho:YAG ceramic10.1134/S1054660X12100155 ↗
22. Y. Urata, M. Yumoto, O. Louchev, S. Wada, Q-switch operation of thulium and holmium-doped YAG ceramic laser at room temperature, in: Proc. SPIE 7153, Lidar Remote Sensing for Environmental Monitoring IX, 715315, 2008, http://dx.doi.org/10.1117/12.804774.10.1117/12.804774 ↗
23. Y. Urata, T. Kozeki, A. Kudo, A. Sato, K. Asai, S. Wada, Characterization of thulium- and holmium-doped YAG ceramic laser materials, in: Proc. SPIE 6409, Lidar Remote Sensing for Environmental Monitoring VII, 64091J, 2006, http://dx.doi.org/10.1117/12.697908.10.1117/12.697908 ↗
24. Continuous-wave co-lasing in a monoclinic co-doped (Ho, Tm):KLu(WO4)2 crystal10.1002/lapl.201110072 ↗
25. InGaAs/GaAs saturable absorber for diode-pumped passively Q-switched mode-locking of Tm, Ho:YVO4 laser10.1002/lapl.201010094 ↗
26. End-pumping Tm, Ho, Ce:NaY(WO4)2 crystal laser at 2.07 μm and the up-conversion repressed10.1002/lapl.201010082 ↗
27. Coherent laser radar at 2μm using solid-state lasers10.1109/36.210439 ↗
28. Single mode Tm and Tm, Ho:LuAG lasers for LIDAR applications10.1002/lapl.200410067 ↗
29. Diode-pumped single frequency Tm:YAG laser at room temperature10.1002/lapl.200810069 ↗
30. Precipitation of Tm2O3 nanopowders for application in reactive sintering of Tm:YAG10.1016/j.ceramint.2014.02.117 ↗
31. Effect of Tm2O3 doping on microstructure and optical properties of Tm:YAG ceramics10.1016/j.ceramint.2015.03.277 ↗
32. Influence of Y2O3 powder morphology on optical proper-ties of YAG ceramics prepared by reactive sintering
33. Preparation of transparent neodymium-doped yttrium aluminate garnet (Nd:YAG) ceramics with the use of freeze granulation10.1016/j.optmat.2015.04.005 ↗
34. Particle size effects on yttrium aluminum garnet (YAG) phase formation by solid-state reaction10.1557/jmr.2014.224 ↗
35. Preparation of translucent YAG: Ce ceramics by reaction sintering
36. The effect of Al–O substitution for Si–N on the luminescence properties of YAG: Ce phosphor10.1016/j.jeurceramsoc.2011.04.021 ↗