journal article·2019-10

Polyethylene/phosphors composites, a novel treatment for LDPE plastic

S. Carmona-Téllez, R.I. Sánchez-Alarcón, M.A. Aguilar-Frutis, A.N. Meza-Rocha, R. Lozada-Morales, N. Pinna, G. Alarcón-Flores

Optical Materials· Volume 96
Publisher page

Abstract

Abstract In this research the synthesis and characterization of polyethylene/phosphors composites were studied. Organic and inorganic phosphors were blended in low-density polyethylene (LDPE), and later, thin films were deposited by means of the dip coating technique. The optical, structural and luminescent properties of the films were studied. All the composites were prepared from pristine polyethylene, which seems to be easily scalable to waste-polyethylene and high volumes. FTIR measurements showed that the polyethylene/phosphors composites were properly synthesized; UV–Vis allowed to characterize the transparency of the LDPE matrix after the incorporation of the phosphors. Finally, a complete luminescent study was carried out to characterize the optical properties of the composites and the possibility to use them in technological applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polydiacetylene-based materials and applications · Green IT and Sustainability · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Catalytic air gasification of plastic waste (polypropylene) in a fluidized bed, part II: effects of some operating variables on the quality of the raw gas produced using olivine as the in-bed material10.1021/ie200145p ↗
2. Chemical recycling of poly(methyl methacrylate) by pyrolysis: potential use of the liquid fraction as a raw material for the reproduction of the polymer10.1016/j.eurpolymj.2007.02.044 ↗
3. Trends in waste plastics and recycling
4. Products derived from waste plastics (PC, HIPS, ABS, PP and PA6) via hydrothermal treatment: characterization and potential applications10.1016/j.chemosphere.2018.05.156 ↗
5. Hydrocracking of virgin and waste plastics: a detailed review10.1016/j.rser.2018.03.034 ↗
6. Plastics recycling: challenges and opportunities10.1098/rstb.2008.0311 ↗
7. Performance of structural concrete with recycled plastic waste as a partial replacement for sand10.1016/j.conbuildmat.2017.11.127 ↗
8. Spectrally-resolved internal quantum efficiency and carrier dynamics of semipolar (10-11) core-shell triangular nanostripe GaN/InGaN LEDs10.1088/1361-6528/aab82e ↗
9. Encapsulation requirements to enable stable organic ultra-thin and stretchable devices10.1557/jmr.2018.194 ↗
10. An extremely narrow band gap conjugated polymer for photovoltaic devices covering UV to near-infrared light10.1016/j.dyepig.2018.05.052 ↗
11. White-light generation through nonlinear optical response of 1,3,5,7-tetraphenyladamantane: amorphous versus crystalline states10.1002/adom.201701162 ↗
12. Luminescent polystyrene films, a novel way to reduce styrofoam residues
13. Polyethylene terephthalate thin films; a luminescence study10.1016/j.optmat.2014.12.026 ↗
14. Synthesis of Al2O3: Eu3+ powder and PET films with this powder incorporated: a luminescence study10.1149/2.0111507jss ↗
15. Microplastics in Spanish table salt10.1038/s41598-017-09128-x ↗
16. Polyol-mediated synthesis of nanoscale functional materials10.1002/adfm.200390014 ↗
17. Continuous synthesis of Zn2SiO4:Mn2+ fine particles in supercritical water at temperatures of 400–500 ◦C and pressures of 30–35MPa10.1016/j.supflu.2010.05.007 ↗
18. Facile synthesis of high quality TiO2 nanocrystals in ionic liquid via a microwave-assisted process10.1021/ja070809c ↗
19. Microwave chemistry for inorganic nanomaterials synthesis10.1039/b9nr00377k ↗
20. Effect on the stabilization of the anatase phase and luminescent properties of samarium-doped TiO2 nanocrystals prepared by microwave irradiation10.1016/j.jallcom.2016.06.083 ↗
21. Synthesis of LiFePO4 nanoparticles in polyol medium and their electrochemical properties10.1149/1.2218308 ↗
22. Photo and cathodoluminescence characteristics of dysprosium doped yttrium oxide nanoparticles prepared by Polyol method10.1016/j.jlumin.2013.10.041 ↗
23. Nano structure phosphors for FEDs10.1889/1.2036461 ↗
24. Prabhu Ramanujam, Bala Vaidhyanathan, Jon Binner, Shaghayegh Ghanizadeh, Zhaoxia Zhou and Chris Spacie, Rapid synthesis of nanocrystalline YAG via microwave-assisted solvothermal process, J. Am. Ceram. Soc., 101, 4864–4869.10.1111/jace.15815 ↗
25. NIR photo-driven upconversion in NaYF4:Yb,Er/PLGA particles for in vitro bioimaging of cancer cells10.1016/j.msec.2018.05.081 ↗
26. Hierarchical spheres assembled from large ultrathin anatase TiO2 nanosheets for photocatalytic hydrogen evolution from water splitting10.1016/j.ijhydene.2018.05.071 ↗
27. Biodegradable luminescent porous silicon nanoparticles for in vivo applications10.1038/nmat2398 ↗
28. Improving biocompatibility of implantable metals by nanoscale modification of surfaces: an overview of strategies, fabrication methods, and challenges10.1002/smll.200801186 ↗
29. Mingyong Han and Shuming Nie, Luminescent quantum dots for multiplexed biological detection and imaging10.1016/S0958-1669(02)00282-3 ↗
30. Zewei quan, deyan kong, xiaoming liu, and jun lin, Y2O3∶Eu3+ microspheres: solvothermal synthesis and luminescence properties10.1021/cg060717j ↗
31. Dual luminophore polystyrene microspheres for pressure-sensitive luminescent imaging10.1088/0957-0233/17/6/S04 ↗
32. Selective excitation of trivalent thulium via intramolecular energy transfer10.1063/1.1732680 ↗
33. Spectral distribution of typical daylight as a function of correlated color temperature10.1364/JOSA.54.001031 ↗
34. Luminescence properties of α- and β-Zn2SiO4:Mn nanoparticles prepared by a co-precipitation method10.1016/j.jallcom.2016.07.266 ↗
35. Photoluminescence behavior of manganese-doped zinc silicate phosphors10.1111/j.1151-2916.1999.tb02155.x ↗
36. Uniform hollow TiO2:Sm3+ spheres: solvothermal synthesis and luminescence properties10.1016/j.powtec.2013.02.010 ↗
37. Blue, white, and red tunable light emission from (Y2O3:Sm3+)-benzoate hybrid nanophosphors
38. Spectroscopic investigation of samarium-doped lead oxyflouroborate glasses using photo and cathode luminescence10.1111/ijag.12259 ↗
39. Excitation and emission spectra of LaInO3-based solid solutions doped with Sm3+, Sb3+10.1016/j.jlumin.2016.10.020 ↗
40. Polyethylene characterization by FTIR10.1016/S0142-9418(01)00124-6 ↗
41. Application of FTIR-spectroscopy on orientation processes in polyethylene films10.1007/BF01381756 ↗
42. Optical and structural characteristics of Y2O3 thin films synthesized from yttrium acetylacetonates10.1007/s10853-008-2566-5 ↗
43. Optical and structural properties of Zn2SiO4:Mn2+ green phosphor nanoparticles obtained by a polymer-assisted sol–gel method10.1016/j.scriptamat.2007.11.045 ↗
44. Spectroscopy studies of TiO2/carbon nanotubes nanocomposite layers synthesized by the sol-gel method10.1016/j.molstruc.2018.04.095 ↗
45. Up and down conversion photoluminescence from Er, Yb and Li doped Y2O3 phosphors and composites films with PMMA10.1149/2.0261607jss ↗
46. Andrew Peacock, Handbook of Polyethylene: Structures: Properties, and Applications, ISBN: 08247-9546-6, Marcel Dekker, Inc., 270 Madison Avenue, New York 10016.