journal article·2019-09

Concentration dependence of the efficiency and lifetime of blue organic light-emitting diodes with a dispersed fluorescent emitter

Neng Liu, Y.M. Zhou, D. Shelhammer, X.A. Cao

Optical Materials· Volume 95
Publisher page

Abstract

Abstract The performance dependence of blue organic light-emitting diodes (OLEDs) on the concentration of a fluorescent emitter doped in a wide bandgap host was studied. As the concentration of the 4,40-bis(9-ethyl-3-carbazovinylene)-1,10-biphenyl (BCzVBi) dopant was increased from 5 wt%, the external quantum efficiency (EQE) increased from 1.5% and reached the peak value of 2.1% at 15 wt%. Above 15 wt%, the OLEDs suffered from concentration quenching and exhibited two regimes of fast then slow efficiency falloff. The fast falloff resulted from reduced energy transfer as more holes were injected into the dopant, as indicated by the spectral change and lower voltage, whereas the slow falloff occurring above 50 wt% was due to enhanced exciton interaction in aggregated dopant, as evidenced by the dark spot formation. Our study also revealed an extended lifetime of blue fluorescent OLEDs with a host-dopant system emitter, an important benefit over pure fluorescent emitters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Recent progresses on materials for electrophosphorescent organic light‐emitting devices10.1002/adma.201003128 ↗
2. Multifunctional materials in high-performance OLEDs: challenges for solid-state lighting10.1021/cm1024052 ↗
3. 100% phosphorescence quantum efficiency of Ir(III) complexes in organic semiconductor films10.1063/1.1862777 ↗
4. Energy transfer between Ir(ppy)3 molecules in neat film and concentration quenching of phosphorescence10.1016/j.optmat.2007.07.006 ↗
5. Highly phosphorescent organic mixed films: the effect of aggregation on triplet-triplet annihilation10.1063/1.3123815 ↗
6. Quenching-enhanced shift of recombination zone in phosphorescent organic light-emitting diodes10.1016/j.orgel.2010.05.010 ↗
7. Role of wide bandgap host in the degradation of blue phosphorescent organic light-emitting diodes10.1063/1.4998166 ↗
8. Achieving highly efficient fluorescent blue organic light‐emitting diodes through optimizing molecular structures and device configuration10.1002/adfm.201002165 ↗
9. Highly efficient, deep‐blue doped organic light‐emitting devices10.1002/adma.200501169 ↗
10. High efficiency fluorescent white organic light-emitting diodes with red, green and blue separately monochromatic emission layers10.1016/j.orgel.2009.02.006 ↗
11. Correlation between triplet–triplet annihilation and electroluminescence efficiency in doped fluorescent organic light‐emitting devices10.1002/adfm.200902329 ↗
12. Red fluorescent materials based on naphthylamine for non-doping OLEDs10.1016/j.optmat.2005.09.074 ↗
13. Red fluorescent materials based on naphthylamine for non-doping OLEDs10.1063/1.4819155 ↗
14. Impact of dopant aggregation on the EL of blue fluorescent host-dopant emitters10.1109/LED.2019.2908194 ↗
15. Management of singlet and triplet excitons for efficient white organic light-emitting devices10.1038/nature04645 ↗
16. Study on blue organic light-emitting diodes doped with 4,4’‐bis (9‐ethyl‐3carbazovinylene)‐1,1’‐biphenyl in various host materials10.1016/j.optcom.2015.12.074 ↗
17. Efficiency enhancement of fluorescent blue organic light-emitting diodes using doped hole transport and emissive layers10.3788/COL201614.043001 ↗
18. Degradation phenomena in small-molecule organic light-emitting devices10.1021/cm040081o ↗
19. Degradation of phosphorescent organic light-emitting diodes under pulsed current stressing10.1016/j.orgel.2013.06.025 ↗
20. Thermal and nonthermal factors affecting the lifetime of blue phosphorescent organic light-emitting diodes10.1109/TED.2018.2840432 ↗
21. Effects of post annealing on the luminance and reliability of polyfluorene organic light-emitting diodes10.1109/TED.2018.2888858 ↗