Study on water absorption characteristics of cubic Y2O3 films
Source abstract
Abstract
Abstract Based on the electron beam evaporation with oxygen plasma assistance, Y2O3 films were prepared at different deposition temperatures and oxygen flow rates. X-ray diffraction showed that all deposited Y2O3 films had cubic phase with (2 2 2) plane preferred orientation. Spectrometer test results showed that water absorption decreases in transmittance and reflectance around the wavelength of 2.9 μm. According to Lorentz dispersion theory, a multi-oscillator model was established to calculate optical constants and the inhomogeneity of Y2O3 films in the wavelength range from 2.5 to 4 μm. The results indicate an abnormal dispersion phenomenon is appearing in the 2.5–4 μm wavelength region. It was found that under the same oxygen flow rate, higher substrate temperature leads to a greater refractive index and smaller extinction coefficient. When the oxygen flow rate is increased at the same substrate temperature, the extinction coefficient remains almost unchanged, while the refractive index decreases. In addition, the refractive index and the inhomogeneity of the films increase almost linearly as the grain size increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ga2O3 and related materials · Ion-surface interactions and analysis · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Enhanced optical constants of nanocrystalline yttrium oxide thin films10.1063/1.3524202 ↗
2. Optical properties of nanocrystalline Y2O3 thin films grown on quartz substrates by electron beam deposition10.1016/j.optmat.2015.12.012 ↗
3. Effects of oxygen-to-argon ratio on crystalline structure and properties of Y2O3 anti-reflection films for freestanding CVD diamond10.1016/j.jallcom.2016.09.217 ↗
4. Effects of post-deposition annealing on the chemical composition, microstructure, optical and mechanical properties of Y2O3 film10.1016/j.surfcoat.2018.03.092 ↗
5. Self-Q-switched and wavelength-tunable tungsten disulfide-based passively Q-switched Er:Y2O3 ceramic lasers10.1364/PRJ.6.000830 ↗
6. Surface modification in Polycrystalline Y2O3 under high-pressure/high-temperature processing conditions10.1111/jace.12245 ↗
7. Numerical and experimental investigation on thermal shock failure of Y2O3-coated CVD ZnS infrared windows10.1016/j.ijheatmasstransfer.2018.03.062 ↗
8. Effects of precursor evaporation temperature on the properties of the yttrium oxide thin films deposited by microwave electron cyclotron resonance plasma assisted metal organic chemical vapor deposition10.1016/j.tsf.2010.12.004 ↗
9. Oxygen vacancies dependent phase transition of Y2O3 films10.1016/j.apsusc.2017.03.145 ↗
10. Effects of post-deposition annealing ambient on Y2O3 gate deposited on silicon by RF magnetron sputtering10.1016/j.jallcom.2012.02.122 ↗
11. High ε gate dielectrics Gd2O3 and Y2O3 for silicon10.1063/1.126899 ↗
12. Phase transformation of molecular beam Epitaxy-grown nanometer-thick Gd2O3 and Y2O3 on GaN10.1021/am302881y ↗
13. Effects of post-deposition annealing ambient on band alignment of RF magnetron-sputtered Y2O3 film on gallium nitride10.1186/1556-276X-8-53 ↗
14. Growth of a two-dimensional dielectric monolayer on quasi-freestanding graphene10.1038/nnano.2012.217 ↗
15. Quantum capacitance limited vertical scaling of graphene field-effect transistor10.1021/nn200026e ↗
16. Broadband multilayer anti-reflection coating for mid-infrared range from 7 μm to 12 μm10.1364/AO.57.001645 ↗
17. High epitaxial quality Y2O3 high-κ dielectric on vicinal Si(001) surfaces10.1063/1.1519727 ↗
18. Low-temperature growth of Y2O3 thin films by ultraviolet-assisted pulsed laser deposition10.1007/s003390051464 ↗
19. Growth and characterization of Y2O3 thin films10.1016/j.physb.2008.10.022 ↗
20. Electrical properties of pulsed laser deposited Y2O3 gate oxide on 4H–SiC10.1149/1.3481926 ↗
21. Optical properties of cubic and monoclinic Y2O3 films prepared through radio frequency magnetron sputtering10.1016/j.surfcoat.2017.01.004 ↗
22. On the influence of local oxygen addition on the growth of sputter deposited yttrium oxide thin films10.1016/j.surfcoat.2018.10.081 ↗
23. Evolution of composition, microstructure and optical properties of yttrium oxide thin films with substrate temperature10.1016/j.surfcoat.2012.03.074 ↗
24. RF plasma MOCVD of Y2O3 thin films: effect of RF self-bias on the substrates during deposition10.1016/j.apsusc.2013.08.087 ↗
25. Structural analysis of thin epitaxial Y2O3 films on sapphire10.1116/1.3368608 ↗
26. Surface modification in Polycrystalline Y2O3 under high-pressure/high-temperature processing conditions10.1111/jace.12245 ↗
27. Interfacial composition and adhesion of sputtered-Y2O3 film on ZnS substrate10.1016/j.apsusc.2015.05.109 ↗
28. Structural transition of crystalline Y2O3 film on Si(111) with substrate temperature10.1016/S0040-6090(99)00174-1 ↗
29. Optical and electrical properties of Y2O3 thin films prepared by ion beam assisted deposition10.1016/j.apsusc.2010.03.054 ↗
30. Ion beam induced surface and interface engineering10.1016/j.surfrep.2010.11.001 ↗
31. Single-mode, high-power, mid-infrared, quantum cascade laser phased arrays10.1038/s41598-018-33024-7 ↗
32. Large-size oxyfluoride glasses used for vis–IR-transmitting windows10.1016/j.jnoncrysol.2009.01.060 ↗
33. Effect of annealing on the damage threshold and optical properties of HfO2/Ta2O5/SiO2 high-reflection film
34. Macleod
35. Tuning the metal filling fraction in metal-insulator-metal ultra-broadband perfect absorbers to maximize the absorption bandwidth10.1364/PRJ.6.000168 ↗