Novel fluorescence adjustable photonic crystal materials
Source abstract
Abstract
Abstract Novel photonic crystal materials (PCMs) with adjustable fluorescence were fabricated by distributing organic fluorescent powders of Yb 0.2 Er 0.4 Tm 0.4 (TTA) 3 Phen into the opal structures of self-assembled silica photonic crystals (PCs). Via removing the silica solution in a constant speed, PCs with controllable thicknesses and different periodic sizes were obtained on glass slides. Yb 0.2 Er 0.4 Tm 0.4 (TTA) 3 Phen powders were subsequently distributed into the opal structures. The structures and optical properties of the prepared PCMs were investigated. Finite-difference-time-domain (FDTD) calculation was used to further analyze the electric field distributions in PCs with different periodic sizes while the relation between periodic sizes and fluorescent spectra of PCMs was discussed. The results showed that the emission color of the PCMs under irradiation of 980 nm laser can be easily adjusted from green to blue by increasing the periodic size from 250 to 450 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photonic Crystals and Applications · Fern and Epiphyte Biology · Plant and animal studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Lanthanide-doped upconversion nano-bioprobes: electronic structures, optical properties, and biodetection10.1039/C4CS00178H ↗
2. Tin-dioxide nanocrystals as Er3+ luminescence sensitizers: formation of glass-ceramic thin films and their characterization10.1016/j.optmat.2016.08.041 ↗
3. The active-core/active-shell approach: a strategy to enhance the upconversion luminescence in lanthanide-doped nanoparticles10.1002/adfm.200900234 ↗
4. Technological aspects for Tb 3þ -doped luminescent sol–gel nanomaterials10.1016/j.ceramint.2015.05.129 ↗
5. Recent progress in low-voltage cathodoluminescent materials: synthesis, improvement and emission properties10.1039/C4CS00109E ↗
6. Ultraviolet-to-visible downconversion luminescence in solgel oxyfluoride glass ceramics containing Eu(3)(+):GdF(3) nanocrystals10.1364/OL.39.003181 ↗
7. Upconversion luminescence imaging of cells and small animals10.1038/nprot.2013.114 ↗
8. Evaluating upconversion materials developed to improve the efficiency of solar cells: comment10.1364/JOSAB.27.001352 ↗
9. Mutual protection against UV aging of EVA composites using highly active optical conversion additives10.1039/C4RA03748K ↗
10. Transition metal complexes with strong absorption of visible light and long-lived triplet excited states: from molecular design to applications10.1039/C1RA00665G ↗
11. Altering molecular photophysics by merging organic and inorganic chromophores10.1021/ar500385e ↗
12. Engineering light: advances in wavelength conversion materials for energy and environmental technologies10.1021/es303612p ↗
13. Uniform NaYF4:Yb, Tm hexagonal submicroplates: controlled synthesis and enhanced UV and blue upconversion luminescence10.1016/j.materresbull.2012.10.031 ↗
14. Filtration shell mediated power density independent orthogonal excitations-emissions upconversion luminescence
15. Magnetic-downconversion luminescent bifunctional BaGdF5:Dy3+,Eu3+ nanospheres: energy transfer, multicolor luminescence and paramagnetic properties10.1039/C6RA09754E ↗
16. Supercontinuum generation in photonic crystal fiber10.1103/RevModPhys.78.1135 ↗
17. Fabrication and laser behaviors of Yb3+ doped silica large mode area photonic crystal fiber prepared by sol–gel method10.1016/j.optmat.2013.05.029 ↗
18. Stimuli-responsive surfaces for tunable and reversible control of wettability10.1002/adma.201501578 ↗
19. Design and fabrication of mechanochromic photonic crystals as strain sensor, Sensors and Smart Structures Technologies for Civil
20. Photonic crystal slab strain sensors: a viable tool for structural health monitoring
21. Multifunctional superhydrophobic surfaces templated from innately microstructured hydrogel matrix10.1021/nl5019782 ↗
22. Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography10.1021/nl052577q ↗
23. Construction of ZnO/TiO2 photonic crystal heterostructures for enhanced photocatalytic properties10.1016/j.apcatb.2015.01.001 ↗
24. Enhancement of Tb–Yb quantum cutting emission by inverse opal photonic crystals10.1016/j.optmat.2016.01.058 ↗
25. Enhancement of the up-conversion luminescence of Yb3+/Er3+ or Yb3+/Tm3+ co-doped NaYF4 nanoparticles by photonic crystals10.1039/c3tc30895b ↗
26. Photoluminescence modification in upconversion rare-earth fluoride nanocrystal array constructed photonic crystals10.1039/c000379d ↗
27. Manipulating fluorescence characteristics of conjugated fluorescent molecules incorporated into three-dimensional poly(methyl methacrylate) opal photonic crystals10.7567/APEX.7.025202 ↗
28. Remarkable enhancement of upconversion fluorescence and confocal imaging of PMMA Opal/NaYF4:Yb3+, Tm3+/Er3+ nanocrystals10.1039/c3cc40829a ↗
29. Upconversion emission modification and white light generation in NaYF4:Yb3+, Er3+, Tm3+ nanocrystals/opal photonic crystal composites10.1109/JPHOT.2015.2500886 ↗
30. 3-Dimensional photonic crystal surface enhanced upconversion emission for improved near-infrared photoresponse10.1039/C3NR04884E ↗
31. Harvesting uniform and high bright Sm complex via microwave ultrasound method10.1142/S1793604715500046 ↗
32. Synthesis and luminescence properties of ternary complexes of SmxTb1-x(TTA)(3)Phen nanoparticles and their surface modification10.1007/s10853-013-7325-6 ↗
33. Generation of optical beams with desirable orbital angular momenta by transformation media
34. Correlation of spontaneous emission in a one-dimensional random medium with Anderson localization10.1103/PhysRevB.75.205111 ↗
35. Vertical cavity-surface emitting photonic crystal surface-mode lasers10.1007/s00340-008-3000-z ↗
36. Modified spontaneous emissions of europium complex in weak PMMA opals10.1039/c1cp21826c ↗