Mn-doping-induced tunable bandgap and luminescence properties of SnO2 nanoparticles grown by SILAR method

Abstract In the present study, pure and Mn doped SnO2 thin films were grown by performing successive ionic layer adsorption and reaction (SILAR) method on the glass substrates at room temperature. The fabricated thin films have been studied to assess the influence of Mn doping on structural, morphological, and optical properties of SnO2 crystal lattice. The X-ray diffraction (XRD), Ultraviolet–visible spectrometer (UV–Vis), Energy dispersive X-ray analysis (EDAX), Scanning electron microscope (SEM), Raman, X-ray photoelectron spectroscopy (XPS), and Photoluminescence (PL) spectra measurements were conducted. After the XRD and SEM evaluations, it was found that the grown nanoparticles were in rutile type tetragonal structure of polycrystalline nature which was supported by Raman results. And, the surface morphologies were also observed to be affected from the varied concentrations of Mn doping. Besides, the EDAX evaluation confirmed the integration of Mn content next to Sn and O ions in the synthesized SnO2 nanostructures by SILAR method. The UVi-vis analysis disclosed that the absorbance of the prepared thin films had a clear inclination to increase as doping concentration intensified. In addition to that, the optical investigations also uncovered the bandgap of SnO2 nanocrystallines could be tuned from 2.61 eV to 2.00 eV by exposing them to the different levels of Mn ions. Furthermore, the Photoluminescence spectra evidently acknowledged the possibility of engineering optical characteristics by showing increased luminescent emission intensity values right after the introduction of impurities into the SnO2 lattice. The XPS results further verified the manganese and tin valences existed in the produced thin films.