journal article·2021-11

Suppressing the localized surface plasmon resonance of Ag nanoparticles to obtain ultra-high and ultra-uniform optical transmittance of dielectric-Ag-dielectric electrodes

Shuai Wang, Shiqi Zhao, Zhitao Cheng, Jie Wang, Lei Li, Yujie Nian, Yingcui Fang

Optical Materials· Volume 121
Publisher page

Abstract

Abstract Localized surface plasmon resonance (LSPR) of Ag nanoparticles (AgNPs) causes absorbance in the visible light range, and thus lowers the transmittance of Dielectric-Ag-dielectric (DAD) thin films. In this paper, the LSPR of AgNPs was successfully damped by tuning the deposition rate of the Ag layer and by adding a thin Cu layer. A transmittance spectrum as straight as a line paralleling to the x-axis with transmittance of 92.5% ± 0.5% in 440–800 nm and sheet resistance of 6.2Ω/□ were achieved. The electrode is highly stable in air. The mechanism of the improved optical electrical properties was explored via studying the initial growth of the thin films by transmission electron microscopy and was attributed to the reduced aspect ratio of the nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gold and Silver Nanoparticles Synthesis and Applications · Plasmonic and Surface Plasmon Research · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
2. Thin-metal-film-based transparent conductors: material preparation, optical design, and device applications10.1002/adom.202001298 ↗
3. Trilayer nanomesh films with tunable wettability as highly transparent10.1002/adfm.202002556 ↗
4. Recent progress in flexible-wearable solar cells for self-powered electronic devices10.1039/C9EE03046H ↗
5. Effect of thickness on the optical and electrical properties of ITO/Au/ITO sandwich structures10.1021/acsami.9b20203 ↗
6. Semitransparent perovskite solar cells with dielectric/metal/dielectric top electrodes10.1002/ente.201900868 ↗
7. Alternative transparent conducting electrode materials for flexible optoelectronic devices10.1016/j.opelre.2018.06.004 ↗
8. Nb2O5/Ag/ZnO multilayer electrodes with surface rearrangement of Ag deposited on flexible substrate10.1016/j.vacuum.2018.06.049 ↗
9. Thermal stability enhancement of SnO2/Ag/SnO2 transparent electrodes using Ni-doped Ag10.1016/j.spmi.2020.106503 ↗
10. Ultrasmooth and thermally stable silver-based thin films with subnanometer roughness by aluminum doping10.1021/nn503577c ↗
11. Ar plasma irradiation improved optical and electrical properties of TiO2/Ag/TiO2 multilayer thin film10.1364/OL.40.005455 ↗
12. Deposition rate effect on optical and electrical properties of thermally evaporated WO3−x/Ag/WO3−x multilayer electrode for transparent and flexible thin film heaters10.1038/s41598-020-65260-1 ↗
13. Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers10.1016/j.solmat.2013.05.026 ↗
14. Transparent conductive dielectric-metal- dielectric structures for electrochromic applications fabricated by high-power impulse magnetron sputtering10.1021/acsami.9b00191 ↗
15. Ultrathin metal films as the transparent electrode in ITO-free organic optoelectronic devices10.1002/adom.201800778 ↗
16. Smoothing of ultrathin silver films by transition metal seeding10.1016/j.ssc.2006.08.027 ↗
17. Ultrastable and atomically smooth ultrathin silver films grown on a copper seed layer10.1021/am303147w ↗
18. Enhanced surface plasmon resonance on a smooth silver film with a seed growth layer10.1021/nn100466p ↗
19. High performance flexible transparent conductive electrode based on ZnO/AgOx/ZnO multilayer10.1016/j.tsf.2019.137759 ↗
20. Ultrathin silver film electrodes with ultralow optical and electrical losses for flexible organic photovoltaics10.1021/acsami.8b08578 ↗
21. Structural optimization of oxide/metal/oxide transparent conductors for high-performance low-emissivity heaters10.1002/admi.201801287 ↗
22. High quality transparent TiO2/Ag/TiO2 composite electrode films deposited on flexible substrate at room temperature by sputtering10.1063/1.4808438 ↗
23. Localized surface plasmon of Ag nanoparticles affected by annealing and its coupling with the excitons of Rhodamine 6G10.1116/1.4811819 ↗
24. Dynamic control of double plasmon-induced transparencies in aperture-coupled waveguide-cavity system10.1007/s11468-017-0519-z ↗
25. Noble metals on the nanoscale: optical and photothermal properties and some applications in imaging, sensing, biology, and medicine10.1021/ar7002804 ↗
26. How can a particle absorb more than the light incident on it?10.1119/1.13262 ↗
27. Metallic adhesion layer induced plasmon damping and molecular linker as a nondamping alternative10.1021/nn301885u ↗
28. Numerical optimization of multilayer electrodes without indium for use in organic solar cells10.1016/j.solmat.2013.12.026 ↗
29. Effects of oxidation on the localized surface plasmon resonance of Cu nanoparticles fabricated via vacuum coating10.1016/j.vacuum.2020.109965 ↗
30. Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substrates10.1016/j.tsf.2004.11.040 ↗
31. New figure of merit for transparent conductors10.1063/1.323240 ↗
32. The optical properties of metal nanoparticles: the influence of size, shape, and dielectric environment10.1021/jp026731y ↗
33. Surface plasmon resonances of arbitrarily shaped nanometallic structures in the small-screening-length limit10.1098/rspa.2016.0258 ↗
34. Optical properties of gold nanorods: DDA simulations supported by experiments10.1021/jp0507288 ↗
35. A computer simulation of nucleation and growth of thin films10.1016/j.commatsci.2004.02.023 ↗