Development of petroleum pitch/polymer composite binder for anode material of the lithium-ion battery
Source abstract
Abstract
The lithium-ion battery has been utilized in various fields including energy storage system, portable electronic devices and electric vehicles due to their high energy and power densities, low self-discharge, and long cycle-life performances. However, despite of various research on electrode materials, there is a lack of research on developing of binder to replace conventional polymer-based binding materials. In this work, petroleum pitch (MP-50)/polymer (polyurethane, PU) composite binder for lithium-ion battery has fabricated not only to use as a binding material, but also to re-place conventional polymer-based binder. The MP-50/PU composite binder has also prepared to various ratios between petroleum pitch and polymer to optimize the physical and electro-chemical performance of the lithium-ion battery based on the MP-50/PU composite binder. The physical and electrochemical performances of the MP-50/PU composite binder-based lithium-ion battery were evaluated using a universal testing machine (UTM), charge/discharge test. As a result, lithium-ion battery based on the MP-50/PU composite (5:5, mass ratio) binder showed optimized performances with 1.53 gf mm−1 of adhesion strength, 341 mAh g−1 of specific discharge capacity and 99.5% of ICE value.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Hapuarachchi SNS, Wasalathilake K, Nerkar JY, Jaatinen EA, O’Mullane AP, Yan C (2020) Mechanically robust tapioca starch composite binder with improved ionic conductivity for sustainable lithium-ion batteries. Acs Sustain Chem Eng 26:9857–9865. https://doi.org/10.1021/acssuschemeng.0c0284310.1021/acssuschemeng.0c02843 ↗
2. Son IH, Park JH, Kwon S, Park S, Rummeli MH, Bachmatiuk A, Song HJ, Ku J, Choi JW, Choi JM et al (2015) Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density. Nat Commun. https://doi.org/10.1038/ncomms839310.1038/ncomms8393 ↗
3. Hapuarachchi SNS, Sun ZQ, Yan C (2018) Advances in in situ techniques for characterization of failure mechanisms of li-ion battery anodes. Adv Sustain Syst 2:8–9. https://doi.org/10.1002/adsu.20170018210.1002/adsu.201700182 ↗
4. Tang RX, Ma L, Zhang Y, Zheng X, Shi YJ, Zeng XY, Wang XY, Wei L (2020) M. A flexible and conductive binder with strong adhesion for high performance silicon-based lithium-ion battery anode. ChemElectroChem 7:1992–2000. https://doi.org/10.1002/celc.20190215210.1002/celc.201902152 ↗
5. Chai LL, Qu QT, Zhang LF, Shen M, Zhang L, Zheng HH (2013) Chitosan, a new and environmental benign electrode binder for use with graphite anode in lithium-ion batteries. Electrochim Acta 105:378–383. https://doi.org/10.1016/j.electacta.2013.05.00910.1016/j.electacta.2013.05.009 ↗
6. Kuo TC, Chiou CY, Li CC, Lee JT (2019) In situ cross-linked poly(ether urethane) elastomer as a binder for high-performance Si anodes of lithium-ion batteries. Electrochim Acta. https://doi.org/10.1016/j.electacta.2019.13501110.1016/j.electacta.2019.135011 ↗
7. Lee NJ, Seo SW, Kwak CH, Kim MI, Im JS (2020) Effects of oxidation process on thermal properties of petroleum-based isotropic pitch. Appl Chem Eng. 31:36–42. https://doi.org/10.14478/ace.2019.110110.14478/ace.2019.1101 ↗
8. Jenkins CA, Coles SR, Loveridge MJ (2020) Investigation into durable polymers with enhanced toughness and elasticity for application in flexible li-ion batteries. Acs Appl Energ Mater 3(12):12494–12505. https://doi.org/10.1021/acsaem.0c0244210.1021/acsaem.0c02442 ↗
9. Cha H, Kim J, Lee H, Kim N, Hwang J, Sung J, Yoon M, Kim K, Cho J (2020) Boosting reaction homogeneity in high-energy lithium-ion battery cathode materials. Adv Mater. https://doi.org/10.1002/adma.20200304010.1002/adma.202003040 ↗
10. Yu HJ, Zhou HS (2013) High-energy cathode materials (Li2MnO3-LiMO2) for lithium-ion batteries. J Phys Chem Lett 4(8):1268–1280. https://doi.org/10.1021/jz400032v10.1021/jz400032v ↗
11. Lee Y-S, Kim T-J (1999) Rheological behaviors of mesophase pitches prepared from coal tar pitch as carbon fiber precursor. Appl Chem Eng 10(5):690–695
12. Liu G, Zheng H, Song X, Battaglia VS (2012) Particles and polymer binder interaction: a controlling factor in lithium-ion electrode performance. J Electrochem Soc 159(3):A214–A221. https://doi.org/10.1149/2.024203jes10.1149/2.024203jes ↗
13. Mochida I, Korai Y, Ku CH, Watanabe F, Sakai Y (2000) Chemistry of synthesis, structure, preparation and application of aromatic-derived mesophase pitch. Carbon 38:305–328. https://doi.org/10.1016/S0008-6223(99)00176-110.1016/S0008-6223(99)00176-1 ↗
14. Manthiram A (2020) A reflection on lithium-ion battery cathode chemistry. Nat Commun. https://doi.org/10.1038/s41467-020-15355-010.1038/s41467-020-15355-0 ↗
15. Qi HJ, Boyce MC (2005) Stress-strain behavior of thermoplastic polyurethanes. Mech Mater 37(8):817–839. https://doi.org/10.1016/j.mechmat.2004.08.00110.1016/j.mechmat.2004.08.001 ↗
16. Nguyen VA, Kuss C (2020) Review—conducting polymer-based binders for lithium-ion batteries and beyond. J Electrochem Soc 167(6):065501. https://doi.org/10.1149/1945-7111/ab856b10.1149/1945-7111/ab856b ↗
17. Zheng H, Yang R, Liu G, Song X, Battaglia VS (2012) Cooperation between active material, polymeric binder and conductive carbon additive in lithium ion battery cathode. J Phys Chem C 116(7):4875–488210.1021/jp208428w ↗
18. Kim JG, Liu F, Lee CW, Lee YS, Im JS (2014) Boron-doped carbon prepared from PFO as a lithium-ion battery anode. Solid State Sci 34:38–42. https://doi.org/10.1016/j.solidstatesciences.2014.05.00510.1016/j.solidstatesciences.2014.05.005 ↗
19. Kim GJ, Jo YJ, Lee JD (2019) Electrochemical properties of natural graphite coated with PFO-based pitch for lithium-ion battery anode. Korean Chem Eng Res 57(5):672–678
20. Han YJ, Hwang JU, Kim KS, Kim JH, Lee JD, Im JS (2019) Optimization of the preparation conditions for pitch based anode to enhance the electrochemical properties of LIBs. J Ind Eng Chem 73:241–24710.1016/j.jiec.2019.01.031 ↗
21. Park G-G, Park Y-K, Park J-K, Lee J-W (2017) Flexible and wrinkle-free electrode fabricated with polyurethane binder for lithium-ion batteries. RSC Adv 7(26):16244–1625210.1039/C7RA00800G ↗
22. Hernandez Y, Lotya M, Rickard D, Bergin SD, Coleman JN (2010) Measurement of multicomponent solubility parameters for graphene facilitates solvent discovery. Langmuir 26(5):3208–321310.1021/la903188a ↗
23. Li H, Chen Y-M, Ma X-T, Shi J-L, Zhu B-K, Zhu L-P (2011) Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: Preparation and property of PVDF/poly (dimethylsiloxane) blending membrane. J Membrane Sci 379(1–2):397–40210.1016/j.memsci.2011.06.008 ↗
24. Adusei PK, Johnson K, Kanakaraj SN, Zhang G, Fang Y, Hsieh Y-Y, Khosravifar M, Gbordzoe S, Nichols M, Shanov V (2021) Asymmetric fiber supercapacitors based on a FeC2O4/FeOOH-CNT hybrid material. C 7(3):62
25. Jo YJ, Lee JD (2018) Electrochemical performance of graphite/silicon/carbon composites as anode materials for lithium-ion batteries. Korean Chem Eng Res 56(3):320–326
26. Aziz M, Buraidah M, Careem M, Arof A (2015) PVA based gel polymer electrolytes with mixed iodide salts (K+ I− and Bu4N+ I−) for dye-Sensitized solar cell application. Electrochim Acta 182:217–22310.1016/j.electacta.2015.09.035 ↗