journal article·2020-10

Optimizing co-precipitated Nd:YAG nanopowders for transparent ceramics

Feng Tian, Cong Chen, Qiang Liu, Roman Yavetskiy, Maxim Ivanov, Stanislav Balabanov, Yagang Feng, Xin Liu, Ziyu Liu, Dianjun Hu, Zhaoxiang Yang, Tengfei Xie, Jiang Li

Optical Materials· Volume 108
Publisher page

Abstract

Abstract Nd:YAG transparent ceramics were obtained by vacuum sintering from nanopowders synthesized by co-precipitation method. The co-precipitated powder was optimized by studying calcination temperature (from 800 to 1300 °C) of the precursor and ball-milling time (from 0 to 24 h). Influences of calcination temperature and ball-milling time on comprehensive properties of nanopowders were studied in detail. Influences of sintering conditions (sintering temperature and holding time) on transmittance and microstructure were also investigated. The conclusions based on a comprehensive study of the whole ceramics processing from the powders synthesis to Nd:YAG ceramics sintering. The co-precipitated powder calcined at 1250 °C with ball-milling for 12 h demonstrates relatively better comprehensive properties. The 1.0 at% Nd:YAG ceramic sample with the thickness of 1.3 mm sintered at 1775 °C for 20 h has the highest in-line transmittance of 76.0% at 1064 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Solid State Laser Technologies · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Toward pore-free ceramics10.1126/science.1160903 ↗
2. Ceramic laser materials10.1038/nphoton.2008.243 ↗
3. Fabrication and laser behaviors of Nd:YAG ceramic microchips10.1016/j.jeurceramsoc.2011.05.020 ↗
4. Origin and future of polycrystalline ceramic lasers
5. The history, development, and future prospects for laser ceramics: a review10.1016/j.ijrmhm.2012.10.010 ↗
6. Ceramic laser materials: past and present10.1016/j.optmat.2012.04.021 ↗
7. Fabrication and kW-level MOPA laser output of planar waveguide YAG/Yb:YAG/YAG ceramic slab10.1111/jace.16040 ↗
8. Translucent Y3Al5O12 ceramics10.1016/0025-5408(84)90245-9 ↗
9. Laser oscillations in Nd-doped yttrium aluminum, yttrium gallium, and gadolinium garnets10.1063/1.1753928 ↗
10. Low-temperature fabrication of transparent yttrium aluminum garnet (YAG) ceramics without additives10.1111/j.1151-2916.2000.tb01305.x ↗
11. Research in crystal materials: from bulk crystals to micro-nano crystals
12. Large signal LD side-pumped Nd:YAG laser amplifier without water-cooler10.3788/fgxb20194007.0885 ↗
13. Influence of doping concentration on microstructure evolution and sintering kinetics of Er:YAG optical ceramics10.1016/j.optmat.2014.08.016 ↗
14. Diffusion-controlled solid-state reactive sintering of Nd:YAG transparent ceramics10.1016/j.ceramint.2015.05.086 ↗
15. Fabrication and optical-properties of high-performance polycrystalline Nd-YAG ceramics for solid-state lasers10.1111/j.1151-2916.1995.tb08433.x ↗
16. Recent advances in ALON (TM) optical ceramic
17. Development of optical grade polycrystalline YIG ceramics for faraday rotator10.1111/jace.15772 ↗
18. Recent development of A2B2O7 system transparent ceramics10.1007/s40145-018-0287-z ↗
19. Synthesis of Yb:YAG ceramics without sintering additives and their performance10.1111/jace.14588 ↗
20. Fabrication of YAG transparent ceramics using carbonate precipitated yttria powder10.1016/j.jeurceramsoc.2015.02.014 ↗
21. YAG and Y2O3 Laser ceramics from nonagglomerated nanopowders10.1134/S0020168514090040 ↗
22. Fabrication, microstructure and laser performance of composite Nd:YAG transparent ceramics10.1016/j.optmat.2016.05.017 ↗
23. Hot isostatic pressing of transparent Nd:YAG ceramics10.1111/j.1551-2916.2009.03029.x ↗
24. Influence of non-stoichiometry on solid-state reactive sintering of YAG transparent ceramics10.1016/j.jeurceramsoc.2015.04.038 ↗
25. Fabrication and laser parameters of Yb:YAG transparent ceramics with high optical quality
26. Influence of ammonium hydrogen carbonate to metal ions molar ratio on co-precipitated nanopowders for TGG transparent ceramics10.15541/jim20180574 ↗
27. Synthesis of Nd3+ doped nano-crystalline yttrium aluminum garnet (YAG) powders leading to transparent ceramic10.1016/j.optmat.2005.08.045 ↗
28. Agglomeration control of Nd:YAG nanoparticles via freeze drying for transparent Nd:YAG ceramics10.1111/j.1551-2916.2009.02987.x ↗
29. Yanagitani · 1997 · 10
30. Yanagitani · 1998 · 10
31. Neodymium doped yttrium aluminum garnet (Y3Al5O12) nanocrystalline ceramics - a new generation of solid state laser and optical materials10.1016/S0925-8388(02)00083-X ↗
32. Co-precipitation synthesis and sintering of yttrium aluminum garnet (YAG) powders: the effect of precipitant10.1016/S0955-2219(00)00116-3 ↗
33. Chemical composition evolution of YAG co-precipitate determined by pH during aging period and its effect on precursor properties10.1016/j.ceramint.2011.09.054 ↗
34. A homogeneous co-precipitation method to synthesize highly sinterability YAG powders for transparent ceramics10.1016/j.ceramint.2014.10.076 ↗
35. The roles of cation additives on the color center and optical properties of Yb:YAG transparent ceramic10.1016/j.jeurceramsoc.2017.11.055 ↗
36. Co-precipitation synthesis route to yttrium aluminum garnet (YAG) transparent ceramics10.1016/j.jeurceramsoc.2012.02.040 ↗
37. Influence of pH values on (Nd plus Y):Al molar ratio of Nd:YAG nanopowders and preparation of transparent ceramics10.1016/j.jallcom.2010.05.048 ↗
38. Effect of ammonium carbonate to metal ions molar ratio on synthesis and sintering of Nd:YAG nanopowders10.1016/j.optmat.2018.04.026 ↗
39. Fabrication of Nd:YAG transparent ceramics from co-precipitated powders by vacuum pre-sintering and HIP post-treatment10.1016/j.optmat.2020.109728 ↗
40. Synthesis of Nd:YAG powders leading to transparent ceramics: the effect of MgO dopant10.1016/j.jeurceramsoc.2010.10.016 ↗
41. Post-treatment of nanopowders-derived Nd:YAG transparent ceramics by hot isostatic pressing10.1016/j.ceramint.2017.05.015 ↗
42. Fabrication and microstructure development of Yb:YAG transparent ceramics from co-precipitated powders without additives10.1111/jace.16635 ↗
43. Characterizations and laser performances of highly transparent Nd3+:Y3Al5O12 laser ceramics10.1016/j.optmat.2006.01.033 ↗
44. Synthesis of nanocrystalline α-alumina powder using triethanolamine
45. Synthesis of YAG nanopowder by the co-precipitation method: influence of pH and study of the reaction mechanisms10.1016/j.jssc.2012.02.063 ↗