Crystal structure and luminescence properties of CaTiO3:Dy3+ phosphor co-doped with Zr4+
Source abstract
Abstract
Abstract A series of Ca(Ti1−xZrx)O3:Dy3+ phosphors were fabricated using a combustion method. The lattice structure, morphological features, and luminescence performances of the specimens were obtained. Rietveld refinement of the XRD patterns confirmed the crystal distortion of CaTiO3 after Zr4+codoping and the positional occupation of Zr4+ in the CaTiO3 crystal lattice. The photoluminescence spectroscopy results indicated that the fluorescence emission intensity of CaTiO3:Dy3+ was substantially enhanced by Zr4+ codoping and that the optimum doping concentration of Zr4+ was 40% mol. The quantum yield of the Ca(Ti0·6Zr0.4)O3:Dy3+ phosphor was measured to be 9.9%, and its fluorescence lifetime decreased with the increasing concentration of Zr4+ doping. Furthermore, the lowest color temperature was observed for Ca(Ti0·6Zr0.4)O3:Dy3+ among the investigated phosphors and its color coordinate was the closest to the standard white-light color coordinate. These results suggest that the Ca(Ti0·6Zr0.4)O3:Dy3+ phosphor excited by near-ultraviolet light is a potential material for application in white light-emitting diodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Microwave Dielectric Ceramics Synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Promising red phosphors LaNbO4:Eu3+, Bi3+ for LED solid-state lighting application10.1016/S1002-0721(09)60111-3 ↗
2. Enhanced photoluminescence of CaTiO3:Eu3+ red phosphors prepared by H3BO3 assisted solid state synthesis10.1016/S1002-0721(12)60319-6 ↗
3. Enhancement of white light emission of Dy3+:CaTiO3 phosphor by Li+ co-doping10.1007/s10854-015-2927-1 ↗
4. Enhancing the photoluminescence intensity of CaTiO3:Eu3+ red phosphors with magnesium10.1016/S1002-0721(14)60523-8 ↗
5. Solid state synthesis, tunable luminescence and thermal stability of NaCaBO3:Eu2+/Mn2+ phosphors10.1016/j.ceramint.2016.04.182 ↗
6. Luminescence enhancement of Ca3Sr3(VO4)4:Eu3+, Sm3+ red-emitting phosphor by charge compensation10.1016/j.optmat.2017.10.040 ↗
7. Single-phased white-light-emitting NaCaBO3: Ce3+, Tb3+, Mn2+ phosphors for LED applications10.1039/C3DT52328D ↗
8. Single-phased CaAl2Si2O8:Tm3+, Dy3+ white-light phosphors under ultraviolet excitation10.1016/j.jssc.2013.03.017 ↗
9. YScSi4N6C:Ce3+ a broad cyan emitting phosphor to weaken the cyan cavity in full spectrum white light emitting diodes10.1021/acs.inorgchem.7b01408 ↗
10. A novel white emission in Ca8MgBi(PO4)7:Dy3+ single-phase full-color phosphor10.1016/j.jallcom.2014.02.165 ↗
11. Solid state synthesis and luminescence of NaLa(WO4)2:Dy3+ phosphors10.1007/s10854-016-5217-7 ↗
12. Luminescence studies of perovskite structured titanates: a review10.1134/S0030400X15060156 ↗
13. A theoretical study on the photoluminescence of SrTiO310.1016/j.cplett.2010.05.041 ↗
14. Synthesis and luminescent properties of CaTiO3: Pr3+ microfibers prepared by electrospinning method10.1364/OE.18.007543 ↗
15. In situ formation of bioactive calcium titanate coatings on titanium screws for medical implants10.1039/C6RA06597J ↗
16. Processing, point defects and photoluminescence of Pr3+ CaTiO3 phosphors10.1016/j.ceramint.2018.05.042 ↗
17. Long-lasting phosphorescence functionalization of mesoporous silica nanospheres by CaTiO3:Pr3+ for drug delivery10.1016/j.micromeso.2013.02.050 ↗
18. Cross relaxation in CaTiO3 and LaAlO3 perovskite nanocrystals doped with Ho3+ ions10.1016/j.jlumin.2014.04.008 ↗
19. Increased fluorescence intensity in CaTiO3:Pr3+ phosphor due to NH3 treatment and Nb Co-doping10.1016/j.optmat.2016.08.016 ↗
20. Structural and optical properties of Dy3+ doped Aluminofluoroborophosphate glasses for white light applications10.1016/j.optmat.2014.08.015 ↗
21. Spectroscopic properties of Dy3+ ions in CaTiO3 nano-perovskites10.1016/j.jlumin.2013.08.048 ↗
22. Solid state synthesis of CaTiO3:Dy3+/Eu3+ phosphors towards white light emission10.1016/j.cplett.2017.08.042 ↗
23. Luminescence enhancement of (Ca1-xMOx)TiO3:Dy3+ phosphors through partial M (Mg2+/Zn2+) substitution for white-light-emitting diodes10.1016/j.ceramint.2018.05.107 ↗
24. Luminescent properties and microstructure of SiC doped AlON: Eu2+ phosphors10.1016/j.jallcom.2017.07.156 ↗
25. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
26. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
27. Significant enhancement of luminescence intensity of CaTiO3:Eu3+ red phosphor prepared by sol-gel method and co-doped with Bi3+ and Mg2+10.1007/s10971-012-2860-1 ↗
28. A white light emitting luminescent material Ba3Y(PO4)3:Dy3+10.1016/j.ceramint.2014.01.137 ↗
29. Luminescent properties of Dy3+ doped SrMoO4 phosphor10.1016/j.jlumin.2011.01.015 ↗
30. Synthesis and luminescence properties of novel LiSrPO4:Dy3+ phosphor10.1016/j.materresbull.2011.07.033 ↗
31. Luminescence properties of Ba2LiB5O10:Dy3+ phosphor10.1016/j.matlet.2011.04.002 ↗
32. Fabrication, patterning, and optical properties of nanocrystalline YVO4: a (A = Eu3+, Dy3+, Sm3+, Er3+) phosphor films via sol-gel soft lithography10.1021/cm011663y ↗
33. Optical properties of Dy3+ doped CaYAlO4 crystal10.1016/j.jlumin.2018.03.077 ↗
34. The effect of Mg2+ concentration on structural and luminescent properties of CaTiO3: Eu3+ phosphor10.1080/00150193.2018.1432827 ↗
35. Temperature-dependent emission spectra of M2SiO4 : Eu2+ (M = Ca, Sr, Ba) phosphors for green and greenish white LEDs10.1016/j.ssc.2004.12.002 ↗
36. Tunable correlated color temperature of NaSrPO4 phosphors via Dy3+ and Eu3+ co-doping for warm white light-emitting diodes10.1016/j.ijleo.2018.08.055 ↗