journal article·2019-10

Phase dependent photoluminescence and thermoluminescence properties of Y2SiO5:Sm3+ nanophosphors and its advanced forensic applications

M. Mangala Gowri, G.P. Darshan, Yashwanth V. Naik, H.B. Premkumar, D. Kavyashree, S.C. Sharma, H. Nagabhushana

Optical Materials· Volume 96
Publisher page

Abstract

Abstract In the present work, a series of Sm3+ doped Y2SiO5 orange red nanophosphor were synthesized via ultrasonication route. The structural, morphology and luminescent properties of X1 and X2 phased products were thoroughly investigated. SEM images exhibit irregular shaped particles. The optimum doping concentration was found to be 3 mol % for Sm3+ ion and the critical distance Rc was estimated to be ~9.47 A. The dipole-dipole interaction was main liable for concentration quenching. The photometric properties of the prepared nanophosphors were estimated, which indicates that the nanophosphor may be potentially excited NUV chips for application in W-LEDs. The Judd-Ofelt intensity parameters and radiative parameters were estimated. In order to investigate their thermoluminescence properties, prepared products were irradiated to γ -dose in the range from 1 to 5 kGy. Characteristic TL glow curves of X1 phase consists of peaks at 398, 468, 554 and 599 K. However, in X2 phase peaks at 471, 521, 575 and 619 K were recorded. The dose-response plots were linear. The kinetic parameters were estimated by various methods and compared. The optimized Y2SiO5:Sm3+ (3 mol %) nanophosphor was employed to visualize latent fingerprints with high sensitivity, low backward hindrance and simple setup using optimized sample under UV 254 nm light. The aforesaid outcomes signify the fabricated nanophosphor display outstanding luminescence properties leads to significant applications, such as WLED's, dosimetry and forensic science.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Radiation Detection and Scintillator Technologies · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Luminescence and photometric characterization of K+ compensated CaMoO4:Dy3+ nanophosphors10.1039/c3dt50780g ↗
2. Structural, morphological, opto-nonlinear-limiting studies on Dy:PbI2/FTO thin films derived facilely by spin coating technique for optoelectronic technology10.1016/j.jpcs.2019.02.030 ↗
3. Controlling luminescence color through concentration of Dy3+ ions in LiLa1−xDyxP4O12 nanocrystals10.1039/C4TC00682H ↗
4. Preparation and fluorescence properties of color tunable phosphors Ca3Y2(Si3O9)2:Dy3+10.1039/C4DT00794H ↗
5. Hydrothermal synthesis and vacuum ultraviolet excited luminescence properties of novel Dy3+ doped LaPO4 white light phosphors10.1016/j.materresbull.2009.07.021 ↗
6. Combustion synthesis, structural characterization, thermo and photoluminescence studies of CdSiO3:Dy3+ nanophosphor10.1016/j.saa.2012.02.094 ↗
7. Red and green emitting CTAB assisted CdSiO3:Tb3+/Eu3+ nanopowders as fluorescent labeling agents used in forensic and display applications10.1016/j.dyepig.2017.08.011 ↗
8. Dual color emitting Eu doped strontium orthosilicate phosphors synthesized by bio-template assisted ultrasound for solid state lightning and display applications10.1016/j.ultsonch.2016.07.004 ↗
9. Zinc silicates with tunable morphology by surfactant assisted sonochemical route suitable for NUV excitable white light emitting diodes10.1016/j.ultsonch.2016.07.002 ↗
10. Converted white light emitting diodes from Ce3+ doping of alkali earth sulfide phosphors10.1016/j.md.2016.09.002 ↗
11. LaGaO3:A (A = Sm3+ and/or Tb3+) as promising phosphors for field emission displays10.1039/B709929K ↗
12. Ba2ZnWO6:Sm3+ as promising orange-red emitting phosphors: photoluminescence properties and energy transfer process10.1016/j.physb.2017.11.012 ↗
13. Electroluminescence of the oxide thin film phosphors Zn2SiO4 and Y2SiO510.1063/1.361269 ↗
14. Sonochemical synthesis of green emitting Ca2SiO4:Er3+ nanopowders: promising applications in optical thermometry and radiation dosimeter10.1016/j.optmat.2019.04.005 ↗
15. Enhanced luminescence by monovalent alkali metal ions in Sr2SiO4:Eu3+ nanophosphor prepared by low temperature solution combustion method10.1016/j.jallcom.2014.01.094 ↗
16. Rapid visualization of latent fingerprints using novel CaSiO3:Sm3+ nanophosphors fabricated via ultrasound route10.1016/j.jre.2018.04.019 ↗
17. Synthesis, characterization and photoluminescence properties of CaSiO3: Eu3+ red phosphor10.1016/j.saa.2010.08.063 ↗
18. Mg2SiO4:Tb3+ nanophosphor: auto ignition route and near UV excited photoluminescence properties for WLEDs10.1016/j.jallcom.2014.07.100 ↗
19. CdSiO3:Pr3+ nanophosphor: synthesis, characterization and thermoluminescence studies10.1016/j.saa.2012.08.057 ↗
20. Luminescent and scintillation properties of Bi3+ doped Y2SiO5 and Lu2SiO5 single crystalline films10.1016/j.jlumin.2014.05.030 ↗
21. Preparation, characterization, and sinterability of well-defined silica/yttria powders10.1557/JMR.1994.0436 ↗
22. Y2SiO5:Ce phosphor particles 0.5-1.4 μm in size with spherical morphology10.1006/jssc.1999.8325 ↗
23. Amith Yadav, H. J., Eraiah, B., Nagabhushana, H., Darshan, G. P., Daruka Prasad, B., Sharma, S.C., Premkumar, H. B., Anantharaju, K. S., Vijayakumar, G. R., Facile Ultrasound Route to Prepare Micro/Nano Superstructures for Multifunctional Applications. DOI: 10.1021/acssuschemeng.6b01693.10.1021/acssuschemeng.6b01693 ↗
24. Suslick · 1990 · vol. 1 · 197
25. R.B. Basavaraj, H. Nagabhushana, G.P. Darshan, B. Daruka Prasad, S.C. Sharma, K.N. Venkatachalaiah, Ultrasound assisted rare earth doped Wollastonite nanopowders: labeling agent for imaging eccrine latent fingerprints and cheiloscopy applications, J. Ind. Eng. Chem. https://doi.org/10.1016/j.jiec.2017.02.019.10.1016/j.jiec.2017.02.019 ↗
26. Nanocrystalline luminescent Eu3+-doped Y2SiO5 prepared by sol–gel technique10.1016/j.optmat.2005.01.008 ↗
27. Efficient visible to near-infrared energy transfer in Ce3+–Yb3+ co-doped Y2SiO5 phosphors10.1016/j.optmat.2011.12.022 ↗
28. Effective fingerprint recognition technique using doped Yttrium aluminate nanophosphor material10.1016/j.jcis.2015.11.025 ↗
29. Novel and highly efficient red luminescent sensor based SiO2@Y2O3:Eu3+, M+ (M+= Li, Na, K) composite core–shell fluorescent markers for latent fingerprint recognition, security ink and solid state lightning applications10.1016/j.snb.2017.05.022 ↗
30. Facile LaOF: Sm3+ based labeling agent and their applications in residue chemistry of latent fingerprint and cheiloscopy under UV–visible light10.1016/j.arabjc.2017.09.014 ↗
31. Defect correlated fluorescent quenching and electron phonon coupling in the spectral transition of Eu3+ in CaTiO3 for red emission in display application10.1063/1.4876316 ↗
32. Superstructures of doped yttrium aluminates for luminescent and advanced forensic investigations10.1016/j.jallcom.2016.05.255 ↗
33. Synthesis, thermal evolution, and luminescence properties of Yttrium disilicate host matrix10.1021/cm047957b ↗
34. Optical absorption and stimulated emission of neodymium in yttrium orthosilicate10.1109/3.59689 ↗
35. Studies on Y2SiO5:Ce phosphors prepared by gel combustion using new fuels10.1016/j.jallcom.2014.07.036 ↗
36. Lysine assisted hydrothermal synthesis and formation process of MoO3:Sm3+ phosphors with hierarchical structures and its electron trapping luminescence properties10.1016/j.jallcom.2018.07.124 ↗
37. Tunable luminescence and energy transfer for Ce3+/Tb3+/Sm3+ doped SrAl2Si2O8 phosphors10.1016/j.ceramint.2018.03.030 ↗
38. Energy transfer between inequivalent Eu2+ ions10.1016/0022-4596(86)90233-1 ↗
39. Theory of concentration quenching in inorganic phosphors10.1063/1.1740265 ↗
40. M. Dhanalakshmi, H. Nagabhushana, G.P. Darshan, R.B. Basavaraj, B. Daruka Prasad, Sonochemically assisted hollow/solid BaTiO3:Dy3+ microspheres and their applications in effective detection of latent fingerprints and lips prints, J. Sci.: Adv Mater Devices https://doi.org/10.1016/j.jsamd.2017.02.004.10.1016/j.jsamd.2017.02.004 ↗
41. Versatile core–shell SiO2@SrTiO3:Eu3+, Li+ nanopowders as fluorescent label for the visualization of latent fingerprints and anti-counterfeiting applications10.1016/j.cej.2017.06.093 ↗
42. Optical absorption intensities of rare-earth ions10.1103/PhysRev.127.750 ↗
43. Intensities of crystal spectra of rare‐earth ions10.1063/1.1701366 ↗
44. Spectroscopic investigations of Sm3+ doped phosphate glasses: Judd-Ofelt analysis10.1016/j.physb.2018.10.010 ↗
45. Synthesis of strong red emitting Y2O3:Eu3+ phosphor by potential chemical routes: comparative investigations on the structural evolutions, photometric properties and Judd–Ofelt analysis10.1039/C5RA13247A ↗
46. Luminescence studies of rare earth doped yttrium gadolinium mixed oxide phosphor10.1016/j.physb.2012.05.012 ↗
47. Photoluminescence and decay behavior of Tb3+ ions in sodium fluoro-borate glasses for display devices10.1016/j.jlumin.2011.12.080 ↗
48. Fluorescence spectroscopy of Sm3+ ions in P2O5–PbO–Nb2O5 glasses10.1016/j.physb.2008.05.027 ↗
49. A benign approach for tailoring the photometric properties and Judd-Ofelt analysis of LaAlO3:Sm3+ nanophosphors for thermal sensor and WLED applications10.1016/j.snb.2016.12.080 ↗
50. Concentration dependent luminescence properties of Sm3+-ions in tellurite–tungsten–zirconium glasses10.1016/j.optmat.2014.11.042 ↗
51. Cathodoluminescence and thermoluminescence of ZnB2O4:Eu3+ phosphors prepared via wet-chemical synthesis10.1016/j.ceramint.2018.11.191 ↗
52. Chen · 1984 · 49
53. Thermoluminescence glow-curve deconvolution functions for first, second and general order kinetics10.1088/0022-3727/31/19/037 ↗
54. Computerized curve deconvolution of TL/OSL curves using a popular spreadsheet program10.1093/rpd/ncr315 ↗
55. Nucleation and self-assembly dynamics of hierarchical YAlO3:Ce3+ architectures: nano probe for in vitro dermatoglyphics and anti-mimetic applications10.1016/j.msec.2019.01.060 ↗
56. EGCG assisted Y2O3:Eu3+ nanopowders with 3D micro-architecture assemblies useful for latent finger print recognition and anti-counterfeiting applications10.1016/j.snb.2018.02.133 ↗