Enhanced efficiency of the Sb2Se3 thin-film solar cell by physical and chemical passivation of the ITO/Sb2Se3 interface using an ultra-thin layer of AlOx
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Emerging chalcogenide thin films for solar energy harvesting devices10.1021/acs.chemrev.1c00301 ↗
2. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
3. Optical properties of amorphous and polycrystalline Sb2Se3 thin films prepared by thermal evaporation
4. Vertically aligned one-dimensional crystal-structured Sb2Se3 for high-efficiency flexible solar cells via regulating selenization kinetics10.1021/acsami.3c01830 ↗
5. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
6. Photovoltaic materials: present efficiencies and future challenges10.1126/science.aad4424 ↗
7. Analysis of Se Co-evaporation and post-selenization for Sb2Se3-based solar cells10.1021/acsaem.1c02301 ↗
8. Thermal evaporation and characterization of superstrate CdS/Sb2Se3 solar cells10.1063/1.4874878 ↗
9. Efficient double buffer layer Sb2 (SexS1–x)3 thin film solar cell via single source evaporation10.1002/solr.201800144 ↗
10. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
11. 6.6% efficient antimony selenide solar cells using grain structure control and an organic contact layer10.1016/j.solmat.2018.09.004 ↗
12. Improvement in Sb2Se3 solar cell efficiency through band alignment engineering at the buffer/absorber interface10.1021/acsami.8b17611 ↗
13. Stable and efficient CdS/Sb2Se3 solar cells prepared by scalable close space sublimation10.1016/j.nanoen.2018.04.044 ↗
14. Crystal growth promotion and defects healing enable minimum open‐circuit voltage deficit in antimony selenide solar cells10.1002/advs.202105142 ↗
15. Growth mechanism of Sb2Se3 thin films for photovoltaic application by vapor transport deposition10.1016/j.solmat.2019.04.024 ↗
16. Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
17. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
18. Crystal growth promotion and interface optimization enable highly efficient Sb2Se3 photocathodes for solar hydrogen evolution10.1016/j.nanoen.2022.107417 ↗
19. Crystallographic orientation control and defect passivation for high-efficient antimony selenide thin-film solar cells10.1016/j.mtphys.2022.100772 ↗
20. Facile preparation and enhanced photoelectrical performance of Sb2Se3 nano-rods by magnetron sputtering deposition10.1016/j.solmat.2016.10.042 ↗
21. Heterojunction annealing enabling record open‐circuit voltage in antimony triselenide solar cells10.1002/adma.202109078 ↗
22. Thermally induced structural evolution and performance of Sb2Se3 films and nanorods prepared by an easy sputtering method10.1016/j.solmat.2017.09.008 ↗
23. Structural and morphological properties of PLD Sb2Se3 thin films for use in solar cells10.1016/j.solener.2020.08.004 ↗
24. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
25. Promising Sb2(S,Se)3 solar cells with high open voltage by application of a TiO2/CdS double buffer layer10.1002/solr.201800208 ↗
26. Regulating energy band alignment via alkaline metal fluoride assisted solution post‐treatment enabling Sb2(S,Se)3 solar cells with 10.7% efficiency
27. Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb2Se3 solar cells10.1039/D2EE02261C ↗
28. Efficient inorganic‐organic heterojunction solar cells employing Sb2(Sx/Se1‐x)3 graded‐composition sensitizers10.1002/aenm.201301680 ↗
29. Solution‐Processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
30. Sb2Se3 thin‐film solar cells exceeding 10% power conversion efficiency enabled by injection vapor deposition technology10.1002/adma.202202969 ↗
31. Efficient Sb2(S,Se)3 solar modules enabled by hydrothermal deposition10.1002/solr.202000750 ↗
32. Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb2Se310.1021/acsami.9b01220 ↗
33. Deep defects limiting the conversion efficiency of Sb2Se3 thin-film solar cells10.1039/D2CP05585F ↗
34. Distinctive deep‐level defects in non‐stoichiometric Sb2Se3 photovoltaic materials10.1002/advs.202105268 ↗
35. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
36. Tunable quasi‐one‐dimensional ribbon enhanced light absorption in Sb2Se3 thin‐film solar cells grown by close‐space sublimation10.1002/solr.201800128 ↗
37. Crystal growth promotion and defect passivation by hydrothermal and selenized deposition for substrate-structured antimony selenosulfide solar cells10.1021/acsami.2c06805 ↗
38. Enhanced Sb2Se3 solar cell performance through theory-guided defect control10.1002/pip.2900 ↗
39. Influence of post-selenization temperature on the performance of substrate-type Sb2Se3 solar cells10.1021/acsaem.1c00657 ↗
40. Thermally driven point defect transformation in antimony selenosulfide photovoltaic materials
41. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation10.1016/j.solener.2021.07.022 ↗
42. Crystallographic orientation control of 1D Sb2Se3 nanorod arrays for photovoltaic application by in situ back‐contact engineering10.1002/solr.202000294 ↗
43. Enhancement in the efficiency of Sb2Se3 thin‐film solar cells by increasing carrier concertation and inducing columnar growth of the grains
44. Orientation engineering in low‐dimensional crystal‐structural materials via seed screening10.1002/adma.201903914 ↗
45. Quasi-vertically oriented Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV prepared via close-space sublimation and selenization10.1021/acsami.1c13223 ↗
46. Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation10.1016/j.jallcom.2022.168593 ↗
47. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
48. Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: morphology, carrier transport and photovoltaic performance10.1016/j.jallcom.2021.158703 ↗
49. Templated growth and passivation of vertically oriented antimony selenide thin films for high‐efficiency solar cells in substrate configuration
50. 6.5% certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
51. Accelerated optimization of TiO2/Sb2Se3 thin film solar cells by high‐throughput combinatorial approach10.1002/aenm.201700866 ↗
52. Efficient and stable all-inorganic Sb2(S, Se)3 solar cells via manipulating energy levels in MnS hole transporting layers10.1016/j.scib.2021.11.012 ↗
53. Electron transport layer engineering induced carrier dynamics optimization for efficient Cd‐free Sb2Se3 thin‐film solar cells
54. Interfacial engineering by indium-doped CdS for high efficiency solution processed Sb2(S1–xSex)3 solar cells10.1021/acsami.8b18330 ↗
55. Sb2Se3 thin‐film photovoltaics using aqueous solution sprayed SnO2 as the buffer layer
56. Characterization of Mg and Fe doped Sb2Se3 thin films for photovoltaic application10.1063/1.4971388 ↗
57. Cl−1 doped Sb2Se3 polycrystals and films for optoelectric application10.1016/j.jssc.2023.124115 ↗
58. The effect of sodium on antimony selenide thin film solar cells10.1039/C6RA20690E ↗
59. Fundamental physical characterization of Sb2Se3-based quasi-homojunction thin film solar cells10.1021/acsami.0c08180 ↗
60. Magnetron sputtered Sb2Se3-based thin films towards high performance quasi-homojunction thin film solar cells10.1016/j.solmat.2019.110154 ↗
61. P-type conductivity in Sn-doped Sb2Se3
62. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
63. Interfacial engineering towards enhanced photovoltaic performance of Sb2Se3 solar cell10.1002/adfm.202208243 ↗
64. Post‐deposition annealing and interfacial atomic layer deposition buffer layers of Sb2Se3/CdS stacks for reduced interface recombination and increased open‐circuit voltages10.1002/pip.3625 ↗
65. Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
66. Sze · 2006 · vol. 23
67. High-performance and ultra-sensitive ultraviolet photodetector based on surface passivated α-Fe2O3 thin film10.1016/j.matchemphys.2023.127546 ↗
68. Nitrocellulose‐Passivated SnO2 thin film as a ultraviolet‐C photodetector10.1002/adem.202301602 ↗
69. Unconventional enhancement of UV photodetection in surface-passivated TiO2 thin film photodetectors10.1021/acsaenm.3c00620 ↗
70. On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2O310.1063/1.3021091 ↗
71. Behavior of hydrogen in high dielectric constant oxide gate insulators10.1063/1.1609245 ↗
72. First-principles calculations of intrinsic defects in Al2O310.1103/PhysRevB.68.085110 ↗
73. The origin of negative charging in amorphous Al2O3 films: the role of native defects10.1088/1361-6528/ab0450 ↗
74. Crystalline silicon surface passivation with amorphous SiCx:H films deposited by plasma-enhanced chemical-vapor deposition10.1063/1.2140867 ↗
75. Field-effect passivation of the SiO2Si interface10.1063/1.370784 ↗
76. Impact of illumination level and oxide parameters on Shockley–Read–Hall recombination at the Si-SiO2 interface10.1063/1.350782 ↗
77. Low‐temperature surface passivation of silicon for solar cells10.1149/1.2096673 ↗
78. Recombination at the silicon nitride/silicon interface10.1116/1.580757 ↗
79. Buried interface passivation of perovskite solar cells by atomic layer deposition of Al2O310.1021/acsenergylett.3c00296 ↗
80. Inverted perovskite solar cells with over 2,000 h operational stability at 85 °C using fixed charge passivation10.1038/s41560-023-01377-7 ↗
81. Contact passivation in silicon solar cells using atomic‐layer‐deposited aluminum oxide layers10.1002/pssr.201105285 ↗
82. Efficient silicon nitride SiNx:H antireflective and passivation layers deposited by atmospheric pressure PECVD for silicon solar cells10.1002/pip.3141 ↗
83. Nelson · 2003
84. Interpenetrating structure for efficient Sb2Se3 nanorod array solar cells loaded with CuInSe2 QDs sensitizer10.1016/j.jechem.2021.11.002 ↗
85. Enhanced efficiency of the Sb2Se3 thin-film solar cell by the anode passivation using an organic small molecular of TCTA10.1088/1674-4926/44/8/082701 ↗
86. Precise determination of the valence band edge in x-ray photoemission spectra: application to measurement of semiconductor interface potentials10.1103/PhysRevLett.44.1620 ↗
87. InN/GaN valence band offset:High-resolution x-ray photoemission spectroscopy measurements10.1103/PhysRevB.78.033308 ↗
88. Neamen · 2011