Efficient O-band emission from Pr3+ doped low phonon energy ZnF2-based glasses
Source abstract
Abstract
Pr 3+ doped ZnF 2 -based (ZnF 2 -BaF 2 -SrF 2 -YF 3 ) glasses with a low phonon energy of ∼420 cm −1 are prepared by using a conventional melt-quenching method in dry N 2 atmosphere. Under the excitation of a 980 nm laser diode , intense emission at ∼1310 nm is observed from the Pr 3+ doped ZnF 2 -based glasses. The full spectral width at half maximum is 107 nm (1275–1382 nm), which is ∼7 nm wider than that of Pr 3+ doped ZrF 4 -based glass (∼100 nm, 1279–1379 nm). The measured lifetime (∼183 μs) of the excited energy level 1 G 4 for Pr 3+ ions in the ZnF 2 -based glass is also much longer than that of Pr 3+ doped in ZrF 4 -based glass (∼110 μs). According to the theoretically calculated results, a positive gain of 31.7 dB at 1304 nm can be obtained from O-band optical amplifiers based on the Pr 3+ doped ZnF 2 -based glass, which is 5 dB higher than that obtained from amplifiers based on Pr 3+ doped ZrF 4 -based glass with a same pump condition. The corresponding bandwidth for a net gain of >20 dB is ∼51 nm (1277–1328 nm), and the noise figure is calculated to be < 5.8 dB in above spectral range . Our results indicate that Pr 3+ doped ZnF 2 -based glasses have the potential for constructing efficient O-band optical amplifiers .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Glass properties and applications · Solid State Laser Technologies · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Assessment on the achievable throughput of multi-band ITU-T G.652.D fiber transmission systems10.1109/JLT.2020.2989620 ↗
2. A high gain, high output saturation power Pr3+-doped fluoride fiber amplifier operating at 1.3 μm10.1109/68.84462 ↗
3. Pr3+-doped fluoride fiber amplifier operating at 1.31 μm10.1364/OL.16.001747 ↗
4. Low-noise and high-power Pr3+-doped fluoride fiber amplifier10.1109/68.403998 ↗
5. Efficient PDFA module using PbF2/InF3-based fluoride fiber
6. Overview of wideband optical fiber amplification technologies
7. Er3+-doped ZnF2-BaF2-SrF2-YF3 fluoride glasses for 2.7 μm laser applications10.1016/j.matlet.2018.05.062 ↗
8. Optical properties of 4f-ions in ZnF2-CdF2 doped glasses10.4028/www.scientific.net/MSF.67-68.527 ↗
9. Verres aux halogenures de cadmium : I.- Verres fluores10.1016/0025-5408(82)90162-3 ↗
10. Study on 2.86 μm emission properties of Ho3+-doped low-hydroxyl ZnF2 based fluoride glasses for mid-infrared laser applications10.1364/OME.404517 ↗
11. Vibrational spectra and structure of fluorozirconate glasses10.1063/1.441033 ↗
12. Optical absorption intensities of rare-earth ions10.1103/PhysRev.127.750 ↗
13. Intensities of crystal spectra of rare‐earth ions10.1063/1.1701366 ↗
14. Concentration effect on gain of Pr3+-doped fluoride fiber for 1.3 μm amplification10.1109/68.180569 ↗
15. Investigations on exponential lifetime measurements for fluorescence thermometry10.1063/1.1150714 ↗
16. Modelling consideration of praseodymium-doped fiber amplifiers for 1.3 μm wavelength applications10.1016/j.optcom.2006.07.054 ↗
17. End-pumped Nd:LaF3 and Nd:LaMgAl11O19 lasers10.1109/3.34043 ↗
18. Theory of phonon-terminated optical masers10.1103/PhysRev.134.A299 ↗
19. General procedure for the analysis of Er3+ cross sections10.1364/OL.16.000258 ↗
20. Digonnet · 2001 · 172
21. Optimization of Pr3+ : ZBLAN fiber amplifiers10.1109/68.136481 ↗
22. Theoretical model of a thulium-doped fiber amplifier pumped at 1570 nm and 793 nm in the presence of cross relaxation10.1109/JLT.2016.2631635 ↗