Nanosecond laser damage of 532 nm thin film polarizers evaluated by different testing protocols

Different laser damage testing protocols, including 1 -on -1, S -on -1, and Raster Scan, were conducted on 532 nm polarizers to evaluate the damage resistance and mechanisms. A comparison of the laser -induced damage thresholds (LIDTs) revealed different damage characteristics and major contributions to film failure for different polarizations. For P polarization, the LIDTs for the three test protocols were nearly the same because of the stabilization of two typical damage morphologies of flat-bottomed pits and mussel damage pits. For S polarization, the LIDTs for multiple pulses were lowest, where absorptive defect -induced damage was revealed. The damage characteristics of 532 nm polarizers and 1064 nm polarizers have been also compared. The mussel damage pits, which are similar to the typical damage morphologies of ultraviolet (UV) laser damage to fused silica, were observed for the first time in coatings of 532 nm polarizers. This suggests that, the polishing -induced subsurface damage of fused silica substrates may tend to be excited by a short -wavelength laser rather than the fundamental wavelength.