Enhancing photocatalytic efficiency and durability: Ag-modified CNS–TiO2 thin films for sustainable industrial wastewater treatment
Source abstract
Abstract
This study explores a novel approach to address the persistent challenges encountered in recovering powder catalysts and achieving superior photocatalytic performance tailored for environmental remediation and industrial wastewater (IE) treatment. Isopropyl alcohol (IPA), chosen as the solvent through Liyanage classical equations and zeta potential measurements (−33.6 mV), sets the stage for investigating the critical role of the surfactant (PVP) and binder (SiO2) in optimizing colloidal stability, thin-film coating, and photocatalytic activity. Meticulous experimentation reveals a synergistic 10:1 g/L ratio of PVP and SiO2 solutions as the key to achieving a delicate balance in enhancing colloidal stability, facilitating thin-film coating, and optimizing photocatalytic kinetics (84 ± 3%, k = 0.0303 ± 0.002 min−1). Additionally, the study emphasizes the need for a holistic optimization approach, highlighting colloidal stability and film adhesion to unlock the full potential of these advanced photocatalytic materials in engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Recent research on development and modification of nontoxic semiconductor for environmental application10.1080/15422119.2020.1714658 ↗
2. S-, N- and C-doped ZnO as semiconductor photocatalysts: a review10.1007/s11706-019-0453-4 ↗
3. Aerobic bacterial transformation and biodegradation of dioxins: a review10.1186/s40643-020-0294-0 ↗
4. Photodegradation of imazethapyr herbicide by using slurry and supported TiO2: efficiency comparison10.1016/j.arabjc.2011.03.013 ↗
5. Antibiotics from water
6. Photocatalytic activity improvement and application of UV-TiO2 photocatalysis in textile wastewater treatment: a review10.1016/j.jece.2019.103248 ↗
7. Photocatalytic degradation of methylene blue by titanium dioxide: experimental and modeling study10.1021/ie502367x ↗
8. Methylene blue photocatalytic degradation by TiO2 nanoparticles supported on PET nanofibres10.1016/j.matpr.2019.09.174 ↗
9. Solar-TiO2 immobilized photocatalytic reactors performance assessment in the degradation of methyl orange dye in aqueous solution
10. Degradation of rhodamine B in water by ultrasound-assisted TiO2 photocatalysis10.1016/j.jclepro.2021.127758 ↗
11. A review of the production cycle of titanium dioxide pigment
12. Application of TiO2 photocatalysis for air treatment: patents' overview10.1016/j.apcatb.2010.05.011 ↗
13. Principles and mechanisms of photocatalytic dye degradation on TiO2 based photocatalysts : a comparative overview10.1039/C4RA06658H ↗
14. Pesci · 2013
15. Review on modified TiO2 photocatalysis under UV/visible light: selected results and related mechanisms on interfacial charge carrier transfer dynamics10.1021/jp204364a ↗
16. Force · 2001
17. Electrostatic and sterical stabilization of TiO2 dispersions10.1021/la00002a010 ↗
18. Electrostatic stabilization of ultrafine titania in ethanol10.1111/j.1151-2916.2002.tb00127.x ↗
19. Stable inks for inkjet printing of TiO2 thin films10.1016/j.mssp.2018.03.015 ↗
20. Influence of surfactants in improving degradation of polluting dyes photocatalyzed by TiO2 in aqueous dispersion10.1016/j.jphotochem.2021.113342 ↗
21. Effect of calcination temperature on the crystallite size, particle size and zeta potential of TiO2nanoparticles synthesized via polyol-mediated method10.1016/j.matpr.2020.10.199 ↗
22. Solar photocatalytic degradation of carbaryl in water using TiO2-coated filters with different binders and effect of the operating conditions10.1007/s11356-022-21907-2 ↗
23. Application of a mineral binder to reduce VOC emissions from indoor photocatalytic paints10.1016/j.buildenv.2019.04.031 ↗
24. Immobilization techniques of a photocatalyst into and onto a polymer membrane for photocatalytic activity10.1039/D0RA10964A ↗
25. Recent advances in TiO2 films prepared by sol-gel methods for photocatalytic degradation of organic pollutants and antibacterial activities10.3390/coatings9100613 ↗
26. Photocatalytic methylene blue degradation on multilayer transparent TiO2 coatings10.1016/j.optmat.2019.02.041 ↗
27. SiO2-TiO2 films supported on ignimbrite by spray coating for the photocatalytic degradation of NOx gas and methyl orange dye10.1155/2020/4756952 ↗
28. Hydrophobic photocatalytic composite coatings based on nano-TiO2 and fluorinated ethylene propylene prepared by electrostatic spraying
29. Self cleaning photoactive TiO2 coatings on SLS glasses by sol-gel dip coating10.4028/www.scientific.net/KEM.264-268.407 ↗
30. Photocatalytic degradation of azo dye reactive orange 16 by TiO2, Water10.1007/s11270-009-9980-4 ↗
31. Photocatalytic degradation of multi-organo-sulfur industrial wastewater using TiO2 produced from modified sulfate process10.1016/j.jwpe.2023.103805 ↗
32. H. Kuruva, V. Bai, B.R. Mishra, K. Murugan, T. Thomas, Enhanced photocatalytic degradation of anionic and cationic dyes in industrial wastewater using mechanically doped CNS-TiO2 and synergistic TiO2 incorporation : A promising approach for industrial wastewater treatment. (SSRN: https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4738545) .
33. An analysis of nanoparticle settling times in liquids10.1155/2016/7061838 ↗
34. The role of surfactant in lung disease and host defense against pulmonary infections10.1513/AnnalsATS.201411-507FR ↗
35. Influence of surfactant on the morphology and photocatalytic activity of anatase TiO2 by solvothermal synthesis10.1155/2018/3086269 ↗
36. Effect of settling time, velocity gradient, and camp number on turbidity removal for oilfield produced water, Egypt
37. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
38. The role of Diethanolamine as stabilizer in controlling morphology, roughness and photocatalytic activity of ZnO coatings in sonophotodegradation of methylene blue10.1088/2053-1591/ab2a43 ↗
39. Influence of ionic strength in the adsorption and during photocatalysis of reactive black 5 azo dye on TiO2 coated on non woven paper with SiO2 as a binder10.1016/j.jhazmat.2007.04.086 ↗
40. Strong effect of light scattering by distribution of TiO2 particle aggregates on photocatalytic efficiency in aqueous suspensions10.1016/j.cej.2020.126186 ↗
41. Correlation of surface area with photocatalytic activity of TiO210.26802/jaots.2017.0063 ↗
42. A review on the factors affecting the photocatalytic degradation of hazardous materials
43. Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling10.1016/j.jmmm.2006.01.109 ↗
44. Deposition of TiO2 thin films by dip-coating technique from a two-phase solution method and application to photocatalysis10.1590/1980-5373-mr-2021-0007 ↗
45. Carbon-doped mesoporous TiO2 film and its photocatalytic activity10.1016/j.micromeso.2010.12.010 ↗
46. Innovative visible light-activated sulfur doped TiO2 films for water treatment10.1016/j.apcatb.2011.06.039 ↗
47. Effect of nitrogen doping on optical and photocatalytic properties of TiO2 thin film prepared by spin coating
48. Synthesis of C-N-S co-doped TiO2 mischcrystal with an iso2.82 eV characteristic and its photocatalytic activity under visible light10.1039/C8CY00353J ↗
49. Photocatalytic reactivity of carbon–nitrogen– sulfur-doped TiO2 upconversion phosphor composites