Effects of 200 keV Ar-ions irradiation on the structural and optical properties of reactively sputtered CrN films
Source abstract
Abstract
Abstract Modification in structural and optical properties of chromium-nitride (CrN) films induced by argon ion irradiation and thermal annealings were investigated using various experimental techniques. CrN films deposited by d. c. reactive sputtering on Si substrate were implanted with 200 keV argon ions, at fluences of 5–20 × 1015 ions/cm2. As-implanted samples were then annealed in vacuum, for 2 h at 700 °C. Rutherford backscattering spectrometry, X-ray diffraction, cross-sectional (high-resolution) transmission electron microscopy and spectroscopic ellipsometry (SE) measurements were carried out in order to study structural and optical properties of the layers. After irradiation with 200 keV Ar ions a damaged surface layer of nanocrystalline structure was generated, which extended beyond the implantation profile, but left an undamaged bottom zone. Partial loss of columnar structure observed in implanted samples was recovered after annealing at 700 °C and CrN started to decompose to Cr2N. This layer geometry determined from transmission electron microscopy was inferred in the analysis of SE data using the combined Drude and Tauc-Lorentz model, and the variation of the optical bandgap was deduced. The results are discussed on the basis of the changes induced in the microstructure. It was found that the optical properties of the layers are strongly dependent on the defects' concentration of CrN.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Cracking resistance of thin hard coatings estimated by four-point bending10.1016/S0257-8972(96)03123-4 ↗
2. Microstructure and mechanical/thermal properties of Cr–N coatings deposited by reactive unbalanced magnetron sputtering10.1016/S0257-8972(01)01090-8 ↗
3. A comparative study of CrNx coatings Synthesized by dc and pulsed dc magnetron sputtering10.1016/j.tsf.2008.09.093 ↗
4. Cutting performance of CrN and Cr-Si–N coated end-mill deposited by hybrid coating system for ultra-high speed micro machining10.1016/j.surfcoat.2008.06.128 ↗
5. Characterization and properties of CrN films deposited by ion-source-enhanced middle frequency magnetron sputtering10.1016/j.vacuum.2008.12.007 ↗
6. Structural and mechanical properties of chromium nitride, molybdenum nitride, and tungsten nitride thin films10.1088/0022-3727/36/8/313 ↗
7. Microstructure, mechanical and tribological properties of CrN/W2N multilayer films deposited by DC magnetron sputtering10.1016/j.surfcoat.2009.08.010 ↗
8. Microstructures and properties changes induced by a metal vapor vacuum arc chromium interlayer in chromium nitride films10.1016/j.matlet.2004.05.020 ↗
9. Synthesis of nanocrystalline CrN by arc discharge10.1016/j.matlet.2007.09.002 ↗
10. Characterisation of corrosion and wear behaviour of nanoscaled e-beam PVD CrN coatings10.1016/j.surfcoat.2006.05.013 ↗
11. Effect of nitrogen flow rate on properties of CrN films Prepared by HCD-gun
12. Heat treatment of nanocrystalline TiN films deposited by unbalanced magnetron sputtering10.1016/j.surfcoat.2005.02.147 ↗
13. Effect of heat treatment on the structure and properties of ion-plated TiN films10.1016/S0257-8972(03)00007-0 ↗
14. Microstructure–property relationships in arc-evaporated Cr–N coatings10.1016/S0040-6090(00)01307-9 ↗
15. Deposition, properties and applications of PVD CrxN coatings10.1016/S0257-8972(99)00021-3 ↗
16. On the influence of carbon implantation on the structural properties of hard TiN coatings studied by glancing incidence X-ray diffraction10.1016/S0168-583X(01)00346-9 ↗
17. Microstructural changes in ion implanted titanium nitride10.1016/S0921-5093(98)00742-4 ↗
18. Corrosion behavior of CrN coatings enhanced by niobium ion implantation10.1016/j.surfcoat.2004.08.057 ↗
19. Friction and wear properties of CrAlN and CrVN films deposited by cathodic arc ion plating method10.1016/S0257-8972(03)00937-X ↗
20. Corrosion behavior of Zr modified CrN coatings using metal vapor vacuum arc ion implantation10.1116/1.2400682 ↗
21. Tribological enhancement of CrN coatings by niobium and carbon ion implantation10.1016/j.surfcoat.2003.09.022 ↗
22. Metal/semiconductor phase transition in chromium nitride (001) grown by rf-plasma-assisted molecular-beam epitaxy10.1063/1.1836878 ↗
23. Band gap in epitaxial NaCl-structure CrN(001) layers10.1063/1.1466528 ↗
24. Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating10.1016/j.jpowsour.2007.10.038 ↗
25. Ziegler · 1985
26. Energy calibration of the 500 kV heavy implanter ionas10.1016/0168-583X(85)90688-3 ↗
27. Simulated annealing analysis of Rutherford Backscattering data10.1063/1.119524 ↗
28. Horiba Scientific, DeltaPsi2 Software, Reference Manual, NP/DeltaPsi2R.Fm/264202–06/01/2010. Part Number: 31 087 091.
29. Ion implantation induced structural changes in reactively sputtered Cr-N layers on Si substrates10.1016/j.nimb.2007.01.112 ↗
30. Ion-beam irradiation effects on reactively sputtered CrN thin films10.1016/j.nimb.2010.03.027 ↗
31. Dearnaley · 1973 · vol. 8
32. Gavarini · J. Nucl. Mater. · 2007 · 362 · 36410.1016/j.jnucmat.2007.01.239 ↗
33. Deposition of CrN coatings by PVD methods for mechanical application10.1016/j.surfcoat.2005.02.038 ↗
34. High rate deposition of thick CrN and Cr2N coatings using modulated pulse power (MPP) magnetron sputtering10.1016/j.surfcoat.2010.11.039 ↗
35. Interface properties and structural evolution of TiN/Si and TiN/GaN heterostructures10.1063/1.1531812 ↗
36. Optical, electronic, and transport properties of nanocrystalline titanium nitride thin films10.1063/1.1403677 ↗
37. 2001
38. Tribological property enhancement of CrN films by metal vapor vacuum arc implantation of Vanadium and Carbon ions10.1016/j.tsf.2007.06.162 ↗
39. Structural, optical and electrical properties of argon implanted TiN thin films10.1016/j.ijrmhm.2014.09.026 ↗
40. High power pulsed magnetron sputtered CrNx films10.1016/S0257-8972(02)00479-6 ↗
41. Influence of nitrogen content on the structural, mechanical and electrical properties of TiN thin films10.1016/j.surfcoat.2004.01.033 ↗
42. Argon and nitrogen implantation effects on the structural and optical properties of vacuum evaporated cadmium sulphide thin films10.1088/0268-1242/17/2/302 ↗
43. Ion implantation damage in CdS10.1080/00337578608206119 ↗
44. Raman scattering and optical absorption studies of Ar+ implanted CdS thin films10.1016/S0168-583X(97)00391-1 ↗