Reduced thermal effect of AZO/Cu/AZO infrared filter film for solar cell
Source abstract
Abstract
Abstract In this work, infrared filter property of aluminum doped ZnO (AZO) films prepared on glass substrates with different Ar flow rate by magnetron sputtering was studied. Then Cu was chosen to produce AZO/Cu/AZO sandwich films to further improve its infrared filter property for high transmittance within 380–1100 nm and low transmittance within 1100–2500 nm. The results showed that AZO film had a maximum transmittance over 85% in the region between 380 nm and 1100 nm and a lowest transmittance of 29.70% between 1100 nm and 2500 nm. While AZO/Cu/AZO sandwich film had a maximum transmittance of 80.95% between 380 nm and 1100 nm and its minimum transmittance was 14.61% between 1100 nm and 2500 nm. By using AZO/Cu/AZO sandwich glass as a cover of silicon solar cell, its working temperature showed a less increase of 10.61 °C after 3.5 h under an irradiation of 0.42 sun compared with that where a standard glass was used. This was because that Cu greatly increased the carrier concentration in the sandwich that led to a stronger carrier absorption in infrared wavelength region, so that a reduced thermal effect of the solar cell was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Transition Metal Oxide Nanomaterials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Efficiency of tandem solar cell systems as a function of temperature and solar energy concentration ratio10.1016/0165-1633(79)90045-5 ↗
2. Theoretical temperature dependence of solar cell parameters10.1016/0379-6787(86)90020-7 ↗
3. Temperature dependence of solar cell performance—an analysis10.1016/j.solmat.2012.02.019 ↗
4. A study on photovoltaic parameters of mono-crystalline silicon solar cell with cell temperature10.1016/j.egyr.2015.03.004 ↗
5. Parameter identification of the glazed photovoltaic thermal system using Genetic Algorithm–Fuzzy System (GA–FS) approach and its comparative study10.1016/j.enconman.2015.08.027 ↗
6. Simultaneously enhanced solar absorption and radiative cooling with thin silica micro-grating coatings for silicon solar cells10.1016/j.solmat.2019.04.006 ↗
7. Outdoor testing of c-Si photovoltaic modules with spectrally-selective mirrors for operating temperature reduction 2019
8. Performance and economic limits of passively cooled hybrid thermoelectric generator-concentrator photovoltaic modules10.1016/j.apenergy.2019.01.132 ↗
9. Zouak · 2020
10. Water as infrared filter for silicon solar cell efficiency enhancement for Kerman province of Iran as a talent region for solar energy production10.1108/WJE-12-2016-0165 ↗
11. Thermal stability of ion-implanted ZnO10.1063/1.2140481 ↗
12. Preparation of conducting and transparent indium-doped ZnO thin films by chemical spray10.1016/j.solmat.2005.04.010 ↗
13. Characteristics of NiO-AZO thin films deposited by magnetron co-sputtering in an O2 atmosphere10.1016/j.matlet.2012.01.021 ↗
14. Infrared metamaterial by RF magnetron sputtered ZnO/Al:ZnO multilayers Aip
15. Efficient large-area polymer solar cells on flexible substrates10.1063/1.1787158 ↗
16. Formation of F-doped ZnO transparent conductive films bu sputtering of ZnF2
17. Al-doped ZnO films deposited on a slightly reduced buffer layer by reactive DC unbalanced magnetron sputtering10.1016/j.tsf.2013.10.153 ↗
18. Preparation and characterization of transparent conductive Zn:Ga films by DC reactive magnetron sputtering10.1016/j.matchar.2006.11.020 ↗
19. Effect of Si doping on electrical and optical properties of ZnO thin films grown by sequential pulsed laser deposition10.1088/0022-3727/42/16/165405 ↗
20. Efficient light incoupling into silicon thin-film solar cells by anti-reflecting MgO/high-compact-AZO with air-side textured glass10.1088/0022-3727/46/48/485107 ↗
21. Structural, optical and electrical properties of AZO/Cu/AZO tri-layer films prepared by radio frequency magnetron sputtering and ion-beam sputtering10.1016/j.vacuum.2008.05.029 ↗
22. Transparent conductive and infrared reflective AZO/Cu/AZO multilayer film prepared by RF magnetron sputtering10.1007/s10854-014-2297-0 ↗
23. Improved performance of transparent-conducting AZO/Cu/AZO multilayer thin films by inserting a metal Ti layer for flexible electronics10.1364/OL.42.003020 ↗
24. Mn doped and undoped ZnO films: a comparative structural, optical and electrical properties study10.1016/j.matchemphys.2005.07.045 ↗
25. Effect of pre-annealing on thermal and optical properties of ZnO and Al–ZnO thin films10.1142/S0219581X17600171 ↗
26. Otrokov · 2017
27. Effect of post-annealing time on the properties of sputtered Al-doped ZnO thin films10.1007/s10854-016-5261-3 ↗