Controlling spinning pitch property by tetrahydrofuran-soluble fraction of coal tar pitch co-carbonization with petrolatum
Source abstract
Abstract
Isotropic pitch-based carbon fiber was successfully prepared from tetrahydrofuran-soluble fraction of coal tar pitch co-carbonization with petrolatum by air-blowing. The effects of reaction temperature and time, amount of petrolatum added on the composition and spinning properties of resultant pitches were investigated. It indicated that petrolatum could effectively improve the softening point, aromaticity, hydrogen content and molecular weight of the resultant pitches by promoting cross-linking and dehydrogenation polymerization reactions at low air-blowing temperature. Moreover, more aliphatic and naphthenic structures had been introduced into resultant pitches as addition of petrolatum and also inhibited the generation of quinoline-insoluble particles. The obtained green fibers were facile to be stabilized and carbonized and the resultant carbon fibers showed fully isotropic and finer, uniform diameter with smooth surface and higher tensile strength of up to 0.92 GPa. It provided a facile chemical modification method for isotropic pitch-based carbon fiber production. Spinnable pitches and isotropic pitch-based carbon fiber with higher tensile strength prepared from CTP-THFS co-carbonization with petrolatum by air-blowing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Baker DA, Rials TG (2013) Recent advances in low-cost carbon fiber manufacture from lignin. J Appl Polym Sci 130:713. https://doi.org/10.1002/app.3927310.1002/app.39273 ↗
2. Chand S (2000) Carbon fibers for composites. J Mater Sci 35:1303. https://doi.org/10.1023/A:100478030148910.1023/A:1004780301489 ↗
3. Kim BJ, Kotegawa T, Eom Y, An J, Hong IP, Kato O, Nakabayashi K, Miyawaki J, Kim BC, Mochida I, Yoon SH (2016) Enhancing the tensile strength of isotropic pitch-based carbon fibers by improving the stabilization and carbonization properties of precursor pitch. Carbon 99:649. https://doi.org/10.1016/j.carbon.2015.12.08210.1016/j.carbon.2015.12.082 ↗
4. Yang KS, Kim BH, Yoon SH (2014) Pitch based carbon fibers for automotive body and electrodes. Carbon Lett 15:162. https://doi.org/10.5714/CL.2014.15.3.16210.5714/CL.2014.15.3.162 ↗
5. Yang KS, Lee DJ, Ryu SK, Korai Y, Kim YJ, Mochida I (1999) Isotropic carbon and graphite fibers from chemically modified coal-tar pitch. Korean J Chem Eng 16:518. https://doi.org/10.1007/BF0269827810.1007/BF02698278 ↗
6. Yu BJ, Wang CY, Chen MM, Zheng JM, Qi J (2012) Two-step chemical conversion of coal tar pitch to isotropic spinnable pitch. Fuel Process Technol 104:155. https://doi.org/10.1016/j.fuproc.2012.05.00710.1016/j.fuproc.2012.05.007 ↗
7. Yang JX, Nakabayashi K, Miyawaki J, Yoon SH (2016) Preparation of pitch based carbon fibers using Hyper-coal as a raw material. Carbon 106:28. https://doi.org/10.1016/j.carbon.2016.05.01910.1016/j.carbon.2016.05.019 ↗
8. Yang JX, Nakabayashi K, Miyawaki J, Yoon SH (2016) Preparation of isotropic pitch-based carbon fiber using hyper coal through co-carbonation with ethylene bottom oil. J Ind Eng Chem 34:397. https://doi.org/10.1016/j.jiec.2015.11.02610.1016/j.jiec.2015.11.026 ↗
9. Berrueco C, Alvarez P, Diez N, Granda M, Menendez R, Blanco C, Santamaria R, Millan M (2012) Characterisation and feasibility as carbon fibre precursors of isotropic pitches derived from anthracene oil. Fuel 101:9. https://doi.org/10.1016/j.fuel.2011.10.00510.1016/j.fuel.2011.10.005 ↗
10. Yang JX, Nakabayashi K, Miyawaki J, Yoon SH (2017) Preparation of isotropic spinnable pitch and carbon fiber by the bromination-dehydrobromination of biotar and ethylene bottom oil mixture. J Mater Sci 52:1165. https://doi.org/10.1007/s10853-016-0412-810.1007/s10853-016-0412-8 ↗
11. Diez N, Alvarez P, Santamaria R, Blanco C, Menendez R, Granda M (2012) Optimisation of the melt-spinning of anthracene oil-based pitch for isotropic carbon fibre preparation. Fuel Process Technol 93:99. https://doi.org/10.1016/j.fuproc.2011.09.01610.1016/j.fuproc.2011.09.016 ↗
12. Prauchner MJ, Pasa VMD, Otani S, Otani C (2015) Biopitch-based general purpose carbon fibers: processing and properties. Carbon 43:591. https://doi.org/10.1016/j.carbon.2016.05.01910.1016/j.carbon.2004.10.023 ↗
13. Qiao WM, Huda M, Song Y, Yoon SH, Korai Y, Mochida I, Katou O, Hayashi H, Kawamoto K (2005) Carbon fibers and films based on biomass resins. Energy Fuel 19:2576. https://doi.org/10.1021/ef050046j10.1021/ef050046j ↗
14. Kadla JF, Kubo S, Venditti RA, Gilbert RD, Compere AL, Griffith W (2002) Lignin-based carbon fibers for composite fiber applications. Carbon 40:2913. https://doi.org/10.1016/S0008-6223(02)00248-810.1016/S0008-6223(02)00248-8 ↗
15. Baker DA, Gallego NC, Baker FS (2012) On the characterization and spinning of an organic-purified lignin toward the manufacture of low-cost carbon fiber. J Appl Polym Sci 124:227. https://doi.org/10.1002/app.3359610.1002/app.33596 ↗
16. Ma XJ, Zhao GJ (2010) Preparation of carbon fibers from liquefied wood. Wood Sci Technol 44:3. https://doi.org/10.1007/s00226-009-0264-310.1007/s00226-009-0264-3 ↗
17. Huang YX, Zhao GJ (2016) Preparation and characterization of activated carbon fibers from liquefied wood by KOH activation. Holzforschung 70:195. https://doi.org/10.1515/hf-2015-005110.1515/hf-2015-0051 ↗
18. Kim BJ, Eom Y, Kato O, Miyawaki J, Kim BC, Mochida I, Yoon SH (2014) Preparation of carbon fibers with excellent mechanical properties from isotropic pitches. Carbon 77:747. https://doi.org/10.1016/j.carbon.2014.05.07910.1016/j.carbon.2014.05.079 ↗
19. Ko S, Choi JE, Lee CW, Jeon YP (2017) Modified oxidative thermal treatment for the preparation of isotropic pitch towards cost-competitive carbon fiber. J Ind Eng Chem 54:252. https://doi.org/10.1016/j.jiec.2017.05.03910.1016/j.jiec.2017.05.039 ↗
20. Kim BJ, Kotegawa T, Eom Y, An J, Hong IP, Kato O, Nakabayashi K, Miyawaki J, Kim BC, Mochida I, Yoon SH (2016) Enhancing the tensile strength of isotropic pitch-based carbon fibers by improving the stabilization and carbonization properties of precursor pitch. Carbon 99:649. https://doi.org/10.1016/j.carbon.2015.12.08210.1016/j.carbon.2015.12.082 ↗
21. Zeng SM, Maeda T, Mondori J, Tokumitsu K, Mochida I (1993) Preparation of isotropic pitch precursors for general-purpose carbon-fibers (GPCF) by air blowing. 3. Air blowing of isotropic naphthalene and hydrogenated coal-tar pitches with addition of 1,8-dinitronaphthalene. Carbon 31:421. https://doi.org/10.1016/0008-6223(93)90129-X10.1016/0008-6223(93)90129-X ↗
22. Maeda T, Zeng SM, Tokumitsu K, Mondori J, Mochida I (1993) Preparation of isotropic pitch precursors for general-purpose carbon-fibers (GPCF) by air blowing. 1. Preparation of spinnable isotropic pitch precursor from coal-tar by air blowing. Carbon 31:407. https://doi.org/10.1016/0008-6223(93)90127-V10.1016/0008-6223(93)90127-V ↗
23. Zeng SM, Maeda T, Tokumitsu K, Mondori J, Mochida I (1993) Preparation of isotropic pitch precursors for general-purpose carbon-fibers (GPCF) by air blowing. 2. Air blowing of coal-tar, hydrogenated coal-tar, and petroleum pitches. Carbon 31:413. https://doi.org/10.1016/0008-6223(93)90128-W10.1016/0008-6223(93)90128-W ↗
24. Barr JB, Lewis IC (1978) Chemical-changes during the mild air oxidation of pitch. Carbon 16:439. https://doi.org/10.1016/0008-6223(78)90090-810.1016/0008-6223(78)90090-8 ↗
25. Prada V, Granda M, Bermejo J, Menendez R (1999) Preparation of novel pitches by tar air-blowing. Carbon 37:97. https://doi.org/10.1016/S0008-6223(98)00191-210.1016/S0008-6223(98)00191-2 ↗
26. Mora E, Santamaria R, Blanco C, Granda M, Menendez R (2003) Mesophase development in petroleum and coal-tar pitches and their blends. J Anal Appl Pyrol 68–9:409. https://doi.org/10.1016/S0165-2370(03)00034-210.1016/S0165-2370(03)00034-2 ↗
27. Wazir AH, Kakakhel L (2009) Preparation and characterization of pitch-based carbon fibers. New Carbon Mater 24:83. https://doi.org/10.1016/S1872-5805(08)60039-610.1016/S1872-5805(08)60039-6 ↗
28. Diez N, Alvarez P, Santamaria R, Blanco C, Menendez R, Granda M (2012) Optimisation of the melt-spinning of anthracene oil-based pitch for isotropic carbon fibre preparation. Fuel Process Technol 93:99. https://doi.org/10.1016/j.fuproc.2011.09.01610.1016/j.fuproc.2011.09.016 ↗
29. Mora E, Blanco C, Prada V, Santamaria R, Granda M, Menendez R (2002) A study of pitch-based precursors for general purpose carbon fibres. Carbon 40:2719. https://doi.org/10.1016/S0008-6223(02)00185-910.1016/S0008-6223(02)00185-9 ↗
30. Li X, Zhu XQ, Okuda K, Zhang Z, Ashida R, Yao H, Miura K (2017) Preparation of carbon fibers from low-molecular-weight compounds obtained from low-rank coal and biomass by solvent extraction. New Carbon Mater 32:41. https://doi.org/10.1016/S1872-5805(17)60106-910.1016/S1872-5805(17)60106-9 ↗
31. Ge CZ, Yang HX, Miyawaki J, Mochida I, Yoon SH, Qiao WM, Long DH, Ling LC (2015) Synthesis and characterization of high-softening-point methylene-bridged pitches by visible light irradiation assisted free-radical bromination. Carbon 95:780. https://doi.org/10.1016/j.carbon.2015.09.00310.1016/j.carbon.2015.09.003 ↗
32. Mochida I, Nakamura E, Maeda K, Takeshita K (1975) Carbonization of aromatic hydrocarbons dIII: carbonization catalyzed by alkali metals. Carbon 13:489. https://doi.org/10.1016/0008-6223(75)90050-010.1016/0008-6223(75)90050-0 ↗
33. Mochida I, Shimizu K, Korai Y (1988) structure and carbonization properties of pitches produced catalytically from aromatic-hydrocarbons with HF/BF3. Carbon 26:843. https://doi.org/10.1016/0008-6223(88)90108-X10.1016/0008-6223(88)90108-X ↗
34. Yoo MJ, Ko HJ, Lim YS, Kim MS (2014) Modification of isotropic coal-tar pitch by acid treatments for carbon fiber melt-spinning. Carbon Lett 15:247. https://doi.org/10.5714/CL.2014.15.4.24710.5714/CL.2014.15.4.247 ↗
35. Petrova B, Budinova T, Petrov N, Yardim MF, Ekinci E, Razvigorova M (2005) Effect of different oxidation treatments on the chemical structure and properties of commercial coal tar pitch. Carbon 43:261. https://doi.org/10.1016/j.carbon.2004.09.00610.1016/j.carbon.2004.09.006 ↗
36. Cheng X, Zha Q, Li X, Yang X (2008) Modifed characteristics of mesophase pitch prepared from coal tar pitch by adding waste polystyrene. Fuel Process Technol 89:1436. https://doi.org/10.1016/j.fuproc.2008.07.00310.1016/j.fuproc.2008.07.003 ↗
37. Liu J, Shimanoe H, Nakabayashi K, Miyawaki J, Ko S, Jeon YP, Yoon SH (2018) Preparation of isotropic pitch precursor for pitch-based carbon fiber through the co-carbonization of ethylene bottom oil and polyvinyl chloride. J Ind Eng Chem 67:276. https://doi.org/10.1016/j.jiec.2018.06.03910.1016/j.jiec.2018.06.039 ↗
38. Petrova B, Budinova T, Petrov N, Yardim MF, Ekinci E, Razvigorova M (2005) Effect of different oxidation treatments on the chemical structure and properties of commercial coal tar pitch. Carbon 43:261. https://doi.org/10.1016/j.carbon.2004.09.00610.1016/j.carbon.2004.09.006 ↗
39. AlcanizMonge J, CazorlaAmoros D, LinaresSolano A, Oya A, Sakamoto A, Hoshi K (1997) Preparation of general purpose carbon fibers from coal tar pitches with low softening point. Carbon 35:1079. https://doi.org/10.1016/S0008-6223(97)00064-X10.1016/S0008-6223(97)00064-X ↗
40. Yamaguchi C, Mondori J, Matsumoto A, Honma H, Kumagai H, Sanada Y (1995) Air-blowing reactions of pitch. 1. Oxidation of aromatic-hydrocarbons. Carbon 33:193. https://doi.org/10.1016/0008-6223(94)00127-L10.1016/0008-6223(94)00127-L ↗
41. Ko S, Choi JE, Lee CW, Jeon YP (2017) Modified oxidative thermal treatment for the preparation of isotropic pitch towards cost-competitive carbon fiber. J Ind Eng Chem 54:252. https://doi.org/10.1016/j.jiec.2017.05.03910.1016/j.jiec.2017.05.039 ↗
42. Yoon SH, Korai Y, Mochida I (1994) Assessment and optimization of the stabilization process of mesophase pitch fibers by thermal analyses. Carbon 32:281. https://doi.org/10.1016/0008-6223(94)90191-010.1016/0008-6223(94)90191-0 ↗
43. Fernandez AL, Granda M, Bermejo J, Menendez R (2000) Air-blowing of anthracene oil for carbon precursors. Carbon 38:1315. https://doi.org/10.1016/S0008-6223(99)00264-X10.1016/S0008-6223(99)00264-X ↗
44. Kim JG, Kim JH, Song BJ, Lee CW, Lee YS, Im JS (2016) Empirical approach to determine molecular weight distribution using MALDI-TOF analysis of petroleum-based heavy oil. Fuel 186:20. https://doi.org/10.1016/j.fuel.2016.08.05210.1016/j.fuel.2016.08.052 ↗
45. Kim JG, Kim JH, Song BJ, Jeon YP, Lee CW, Lee YS, Im JS (2016) Characterization of pitch derived from pyrolyzed fuel oil using TLC-FID and MALDI-TOF. Fuel 167:25. https://doi.org/10.1016/j.fuel.2015.11.05010.1016/j.fuel.2015.11.050 ↗
46. Berrueco C, Venditti S, Morgan TJ, Alvarez P, Millan M, Herod AA, Kandiyoti R (2008) Calibration of size-exclusion chromatography columns with 1-methyl-2-pyrrolidinone (NMP)/chloroform mixtures as eluent: applications to petroleum-derived samples. Energy Fuel 22:3265. https://doi.org/10.1021/ef800370310.1021/ef8003703 ↗
47. Vo-Dinh T (1978) Multicomponent analysis by synchronous luminescence spectrometry. Anal Chem 50:396. https://doi.org/10.1021/ac50025a01010.1021/ac50025a010 ↗
48. Andersen SI, Jensen JO, Speight JG (2005) X-ray diffraction of subfractions of petroleum asphaltenes. Energy Fuel 19:2371. https://doi.org/10.1021/ef050039v10.1021/ef050039v ↗
49. Blanco C, Santamaria R, Bermejo J, Menendez R (2000) A comparative study of air-blown and thermally treated coal-tar pitches. Carbon 38:517. https://doi.org/10.1016/S0008-6223(99)00131-110.1016/S0008-6223(99)00131-1 ↗
50. Diez N, Alvarez P, Blanco C, Santamaria R, Granda M, Menendez R (2017) Experimental and statistical optimization of the tensile strength of carbon fibers from pitches with different composition. Ind Eng Chem Res 56:3243. https://doi.org/10.1021/acs.iecr.6b0404510.1021/acs.iecr.6b04045 ↗