journal article·2018-01

Effect of cerium ion modifications on the photoelectrochemical properties of TiO2-based dye-sensitized solar cells

Guangyu Xing, Zige Zhang, Shibo Qi, Guangye Zhou, Kaiyue Zhang, Zijian Cui, Yaqing Feng, Zhongqiang Shan, Shuxian Meng

Optical Materials· Volume 75
Publisher page

Abstract

Abstract Several different quantities of Ce/TiO2 materials were synthesized in the same condition by a wet method. Dye-sensitized solar cells (DSSCs) were fabricated by using porous Ce/TiO2 film electrodes derived from P25 nanoparticles. Various techniques such as X-ray diffraction, Scanning electron microscope and Brunauer-Emmett-Teller are used to characterize the products. The short-circuit current density and photo-electric conversion efficiency reach optimum values: 13.87 mA cm−2 and 7.00% respectively when the amount of Ce(NO3)3·6H2O is 0.050 g/1 g P25, which may be attributed to better transportation of electrons and more adsorption of dyes and sunlight.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Conversion of sunlight to electric power by nanocrystalline dye-sensitized solar cells10.1016/j.jphotochem.2004.02.023 ↗
3. Molecular engineering of organic sensitizers for dye-sensitized solar cell applications10.1021/ja800066y ↗
4. High-performance dye-sensitized solar cells based on solvent-free electrolytes produced from eutectic melts10.1038/nmat2224 ↗
5. Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%10.1016/j.tsf.2007.05.090 ↗
6. Yb, Er-doped CeO2 nanotubes as an assistant layer for photoconversion-enhanced dye-sensitized solar cells10.1016/j.jpowsour.2016.09.039 ↗
7. Electronic-insulating coating of CaCO3 on TiO2 electrode in dye-sensitized solar cells: improvement of electron lifetime and efficiency10.1021/cm0603102 ↗
8. Preparation of nanoporous MgO-Coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells10.1021/la051807d ↗
9. Structural and photoluminescence studies of Eu3+ doped zinc oxide nanorods prepared by precipitation method10.1016/S1002-0721(12)60231-2 ↗
10. Experimental enhancement of the photocurrent in a solar cell using upconversion process in fluoroindate10.1016/j.solmat.2013.04.023 ↗
11. Enhanced photovoltaic performances of the dye-sensitized solar cell by utilizing rare-earth modified tin oxide compact layer10.1016/j.orgel.2017.01.018 ↗
12. Enhanced light harvesting of dye-sensitized solar cells with up/down conversion materials10.1016/j.electacta.2014.12.095 ↗
13. Structural, thermal, and optical absorption studies of Er3+, Tm3+, and Pr3+ -doped borotellurite glasses10.1016/j.jnoncrysol.2017.01.006 ↗
14. Enhancing photoelectrical performance of dye-sensitized solar cell by doping with europium-doped yttria rare-earth oxide10.1016/j.jpowsour.2010.04.081 ↗
15. High-performance nanoporous TiO2/La2O3 hybrid photoanode for dye-sensitized solar cells10.1021/am2015553 ↗
16. Down-converting lanthanide doped TiO2 photoelectrodes for efficiency enhancement of dye-sensitized solar cells10.1016/j.jpowsour.2011.02.031 ↗
17. Aluminum-doped TiO2 nano-powders for gas sensors10.1016/j.snb.2006.12.005 ↗
18. Floating zone growth and characterization of aluminum-doped rutile single crystals10.1016/0022-0248(95)00972-8 ↗
19. The influence of the tin-oxide deposition technique on the sensitivity to CO10.1016/0925-4005(95)85109-7 ↗
20. Titanium dioxide nanomaterial doped with trivalent lanthanide ions of Tb, Eu and Sm: prepara tion, characterization and potential applications10.1016/j.ica.2006.12.052 ↗
21. Hydrothermal growth of one-dimensional Ce-doped TiO2 nanostructures for solid-state DSSCs comprising Mg-doped CuCrO210.1007/s10853-016-0348-z ↗
22. Influence of difference quantity La-doped TiO2 photoanodes on the performance of dye-sensitized solar cells: a strategy for choosing appropriate doping quantity10.1016/j.jssc.2016.02.005 ↗
23. Samarium ions doped titania photoelectrodes for efficiency influence of dye-sensitized solar cells10.1149/2.0371605jes ↗
24. Investigation on mechanism of photocatalytic activity enhancement of nanometer cerium-doped titania10.1016/j.apsusc.2005.11.072 ↗
25. Increasing the oxygen vacancy density on the TiO2 surface by Ce-doping for dye-sensitized solar cells10.1021/jp106648c ↗
26. Ga3+ and Y3+ cationic substitution in mesoporous TiO2 photoanodes for photovoltaic applications10.1021/jp1121068 ↗
27. Structural modifications and associated properties of lanthanum oxide doped sol-gel nanosized titanium oxide10.1021/cm010966p ↗
28. Fabrication of Grätzel solar cell with TiO2/CdS bilayered photoelectrode10.1016/j.tsf.2008.06.010 ↗
29. Photovoltaic performance improvement of dye-sensitized solar cells based on tantalum-doped TiO2 thin films10.1016/j.electacta.2010.08.063 ↗
30. Enhancing photovoltaic performance of dye-sensitized solar cell by rare-earth doped oxide of Lu2O3:(Tm3+, Yb3+)10.1016/j.electacta.2011.03.125 ↗
31. Advancing commercial feasibility of intraparticle expansion for solid state metal foams by the surface oxidation and room temperature ball milling of copper10.1016/j.jallcom.2017.07.029 ↗
32. Influence of the phonon subsystem on the probability of formation of proper point defects in nonmetallic crystals10.1007/BF01035585 ↗
33. The influence of titania electrode modification with lanthanide ions containing thin layer on the performance of dye-sensitized solar cells10.1155/2012/927407 ↗
34. Sol-gel synthesis and photocatalytic activity of CeO2/TiO2 nanocomposites10.1111/j.1551-2916.2007.01540.x ↗
35. Influence of TiO2 nanoparticles on the photovoltaic efficiency of the ITO/PEDOT: PSS/fluorine copolymers/polythiophene: TiO2/Al architecture10.1007/s10854-012-0703-z ↗
36. Anatase TiO2 hollow spheres with small dimension fabricated via a simple preparation method for dye-sensitized solar cells with an ionic liquid electrolyte10.1016/j.electacta.2011.11.088 ↗
37. Chemical capacitance of nanostructured semiconductors: its origin and significance for nanocomposite solar cells10.1039/b310907k ↗
38. Modeling of an equivalent circuit for dye-sensitized solar cells10.1063/1.1690495 ↗
39. Improved-performance dye-sensitized solar cells using Nb-Doped TiO2 electrodes: efficient electron injection and transfer10.1002/adfm.200901292 ↗
40. Influence of Sn source on the performance of dye-sensitized solar cells based on Sn-doped TiO2 photoanodes: a strategy for choosing an appropriate doping source10.1016/j.electacta.2013.06.085 ↗
41. Chemical capacitance of nanostructured semiconductors: its origin and significance for nanocomposite solar cells10.1039/b310907k ↗
42. Preparation of hierarchical TiO2 films with uniformly or gradually changed pore size for use as photoelectrodes in dye-sensitized solar cells10.1016/j.electacta.2013.10.126 ↗
43. Wealth effects of rare earth prices and China's rare earth elements policy10.1007/s10551-015-2773-3 ↗