Observations of the initial stages on reactive gas-timing sputtered TaO thin films by dynamic in situ spectroscopic ellipsometery
Source abstract
Abstract
Abstract Dynamic in-situ spectroscopic ellipsometry (iSE) was employed to investigate the growth mechanism of the tantalum oxide (TaO) film on silicon wafer substrate deposited by reactive gas-timing RF magnetron sputtering compared with conventional reactive sputtering. The effect of reactive gas timing parameter on physical structure and optical property were analyzed by both the continuous and island film growth model with Tauc-Lorentz optical model. The variation of refractive index, film thickness and void volume fraction were obtained from dynamic fits of iSE data indicated that the growth process of the amorphous TaO thin films was divided into two regimes: the nucleation stage and continuous-layer stage. These stages were observed during deposition although the initial film growth stage corresponds to the island film growth model. The study demonstrates that sputtered TaO by the RGT technique at the O2 on-off gas timing has played a crucial factor in improving the formation of nucleation stage and that the deposited TaO thin films were high deposition rate with high refractive index. The complementary field emission scanning electron microscope (FE-SEM) and transmission electron microscope (TEM) showed a good agreement with the film thickness and morphology obtained from dynamic iSE measurement. The real-time monitoring of iSE offers important evidences to understand the growth mechanism of reactive gas-timing technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Semiconductor materials and devices · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Influences of annealing temperature on anti-reflective performance of amorphous Ta2O5 thin films
2. High capacity and performance lithium based electrochromic device via amorphous tantalum oxide protective layer10.1016/j.electacta.2018.05.123 ↗
3. Excitation of multi-order guided mode resonance for multiple color fluorescence enhancement10.1016/j.optlastec.2018.04.029 ↗
4. Fabrication of solid electrolyte Ta2O5 thin film by reactive dc magnetron sputtering suitable for electrochromic all-solid-state switchable mirror glass10.2109/jcersj2.119.76 ↗
5. Electrical and optical properties of tantalum oxide thin films prepared by reactive magnetron sputtering10.1016/j.jallcom.2011.08.019 ↗
6. Continuous electrical tuning of the chemical composition of TaOx-based memristors10.1021/nn2044577 ↗
7. A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O5−x/TaO2−x bilayer structures10.1038/nmat3070 ↗
8. Investigation of optical characteristics of the evaporated Ta2O5 thin films based on ellipsometry and spectroscopy10.1016/j.matpr.2017.06.140 ↗
9. Identification and roles of nonstoichiometric oxygen in amorphous Ta2O5 thin films deposited by electron beam and sputtering processes10.1016/j.apsusc.2016.04.099 ↗
10. Fabrication of ultrathin films of Ta2O5 by a sol–gel method10.1016/j.tsf.2012.12.054 ↗
11. Antireflecting coating from Ta2O5 and SiO2 multilayer films10.1007/s10853-005-0566-2 ↗
12. Atomic layer deposition of tantalum oxide thin films for their use as diffusion barriers in microelectronic devices10.1016/j.mee.2009.06.015 ↗
13. Chemical resistance of thin film materials based on metal oxides grown by atomic layer deposition10.1016/j.tsf.2013.06.079 ↗
14. Interface control of atomic layer deposited oxide coatings by filtered cathodic arc deposited sublayers for improved corrosion protection10.1016/j.matchemphys.2014.06.035 ↗
15. Structural engineering of tantalum oxide based memristor and its electrical switching responses using rapid thermal annealing10.1016/j.jallcom.2018.05.106 ↗
16. Effect of oxygen deficiency on electronic properties and local structure of amorphous tantalum oxide thin films10.1016/j.materresbull.2016.03.004 ↗
17. Fundamental understanding and modeling of reactive sputtering processes10.1016/j.tsf.2004.10.051 ↗
18. Photo-induced hydrophilic properties of reactive RF magnetron sputtered TiO2 thin films10.1016/j.surfcoat.2010.04.001 ↗
19. Reactive magnetron sputtering of TiOx films10.1016/j.surfcoat.2004.07.060 ↗
20. High rate reactive sputtering using gas pulsing: a technique for the creation of films onto large, flat substrates10.1016/S0040-6090(99)00081-4 ↗
21. High rate and process control of reactive sputtering by gas pulsing: the Ti-O system10.1016/S0040-6090(00)01440-1 ↗
22. Modelling of magnetron sputtering of tungsten oxide with reactive gas pulsing10.1002/ppap.200731301 ↗
23. Effect of gas-timing technique on structure and optical properties of sputtered zinc oxide films10.1016/j.ceramint.2007.09.100 ↗
24. Optical band engineering of metal-oxynitride based on tantalum oxide thin film fabricated via reactive gas-timing rf magnetron sputtering10.1016/j.surfcoat.2016.08.002 ↗
25. Crucial role of reactive pulse-gas on a sputtered Zn3N2 thin film formation10.1039/C6RA09972F ↗
26. Silicon nitride thin films deposited by reactive gas-timing magnetron sputtering for protective coating applications10.5185/amlett.2015.SMS5 ↗
27. Growth mechanisms and thickness effect on the properties of Al-doped ZnO thin films grown on polymeric substrates10.1002/pssa.200983767 ↗
28. Study of TiO film growth mechanisms in low-pressure plasma by in situ real-time spectroscopic ellipsometry10.1016/j.tsf.2003.09.019 ↗
29. In situ spectroscopic ellipsometry growth studies on the Al-doped ZnO films deposited by remote plasma-enhanced metalorganic chemical vapor deposition10.1063/1.2837109 ↗
30. In-situ spectroscopic ellipsometry of the Cu deposition process from supercritical fluids: evidence of an abnormal surface layer formation10.1143/JJAP.51.05EA02 ↗
31. Spectroscopic ellipsometry of nanocrystalline diamond film growth10.1021/acsomega.7b00866 ↗
32. In situ ellipsometry for control of Hg1−xCdxTe nanolayer structures and inhomogeneous layers during MBE growth10.1016/j.tsf.2003.11.239 ↗
33. Nucleation and growth mode of the molecular beam epitaxy of GaN on 4H–SiC exploiting real time spectroscopic ellipsometry10.1016/j.jcrysgro.2005.07.016 ↗
34. In situ real-time analysis of the MBE growth of CdTe on Ge: a comparison of ellipsometry data analysis techniques10.1016/j.jcrysgro.2006.08.026 ↗
35. In situ spectroscopic ellipsometry as a versatile tool for studying atomic layer deposition10.1088/0022-3727/42/7/073001 ↗
36. Growth kinetics and oxidation mechanism of ALD TiN thin films monitored by in situ spectroscopic ellipsometry10.1149/1.3530090 ↗
37. Top injection reactor tool with in situ spectroscopic ellipsometry for growth and characterization of ALD thin films10.1016/j.mee.2007.09.006 ↗
38. Probing initial-stages of ALD growth with dynamic in situ spectroscopic ellipsometry10.1016/j.apsusc.2014.12.044 ↗
39. In-situ spectroscopic ellipsometry study of copper selective-area atomic layer deposition on palladium10.1116/1.4884535 ↗
40. Control and monitoring of growth of chromium nitride coatings using in-situ spectroscopic ellipsometry10.1016/S0257-8972(01)01547-X ↗
41. In-situ spectroscopic ellipsometry and structural study of HfO2 thin films deposited by radio frequency magnetron sputtering10.1063/1.4893708 ↗
42. Dynamic in situ spectroscopic ellipsometric study in inhomogeneous TiO2 thin-film growth10.1063/1.3457839 ↗
43. Effective medium models for the optical properties of inhomogeneous materials10.1364/AO.20.000026 ↗
44. Kittel · 1996
45. On the structural properties and optical transmittance of TiO2 r.f. sputtered thin films10.1016/S0169-4332(99)00508-5 ↗
46. Application of the Tauc-Lorentz formulation to the interband absorption of optical coating materials10.1364/AO.41.003137 ↗
47. Determination of optical constants of thin film coating materials based on inverse synthesis10.1364/AO.22.003191 ↗
48. Woollam
49. Tompkins · 1999
50. Preparation and characterization of tantalum oxide films produced by reactive dc magnetron sputtering10.1002/pssa.200306444 ↗
51. Effect of oxygen content on the optical properties of tantalum oxide films deposited by ion-beam sputtering10.1364/AO.24.000490 ↗
52. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
53. Insights into the active surface species formed on Ta2O5 nanotubes in the catalytic oxidation of CO10.1039/c3cp54887b ↗
54. Comparison of Ar+ monoatomic and cluster ion sputtering of Ta2O5 at different ion energies, by XPS: Part 1 - monoatomic ions10.1116/11.20140701 ↗